Setup the ATEM Mini Pro to Live Stream

[@Robert-rk8xu]

Hello, we are working on adding youtube as a luvestreaming source at my church. I currently stream to Facebook from sling studio. Would I be ok streaming to KZbin from our atem mini pro extreme?

[@CrazyAmazingDesigns]

The ATEM Mini Extreme is a great streaming encoder, no reason you couldn't stream to KZbin from it. In the future I would look into and consider RESI or Boxcast as a Streaming Provider. Both platforms can be programed with Automatic Stream Start and Ending times, they stream to multiple destinations, and with RESI you gain Resilient streaming so automatic error checking to make sure all packets make it to the destinations. -Nathan R

[@MoshitoFilms]

Good video. Does this Webcam method solve "cache full"

[@CrazyAmazingDesigns]

Hello, I'm not familiar with that error, but on Google I see several options to solve it. So you should be able to find solutions. -Nathan R

[@CDProducoes]

Hello, it is possible to connect 4 webcams instead of 4K professional cameras?

[@CrazyAmazingDesigns]

Only if the cameras have HDMI Video Out. The ATEM can't switch between digital sources. It sounds like you could use OBS and a StreamDeck controller to do what you want. -Nathan R

[@ram_wales]

Brilliant video - thank you 👏🏽

[@CrazyAmazingDesigns]

@@ram_wales yeah! Thanks for checking it out. What other video topics would you like to see me cover? -Nathan R

[@streamiumlive]

Thanks for the helpful tips. I'm creating a checklist and your video sounded like a good start. Just one question though. I understand that the stream quality setting does NOT impact the recorded video, only the streamed quality. I think USB-C to a solid state disk can get about 70mb/s instead of about a tenth of this. I'm pretty sure it was in an Alex Pettitt video he claimed he'd incorrectly stated the stream settings impact on recorded video, but worked out this wasn't correct. Anyway thanks again - nice job

[@CrazyAmazingDesigns]

Hi, I'm not sure what Alex said, but These ATEM switchers only have the single encoder so whatever settings you choose, those same quality settings apply for Streaming and the SSD recording. That means users can't record in the best quality possible to the SSD, and then stream in a lower quality because of bandwidth issues. -Nathan

[@KENNETHCOOPER55]

I use an X32 full board as my mixer, i also have a gopro 12 & an insta 360 ace pro along with 2 android phones, i'd like to live stream my bands rehearsals via Facebook & or Twitch, will this switcher work for what i'd like it to do, & if so, maybe a simple explanation on how to connect all this, thank you

[@CrazyAmazingDesigns]

Hi, It should just be a matter of getting cables from the different devices that convert to HDMI-A. That should be a straight forward proccess on Amazon. Yes the ATEm switcher should work fine, these have scalers built into each input that allow for different reolution cameras to be connected. -Nathan

[@dustinblatnik]

Love this video Bro! Thank you.

[@CrazyAmazingDesigns]

You are Welcome! -Nathan R

[@josehernandez5396]

Greeting....I have a Atem Mini pro installed in the church where i handle the streaming. Is there a way where i can access the atem mini pro from my home. sometime the priests or other people accidently touch the wrong button and they always call me. are you able to provide a solution to this? thank you and nice demo.

[@CrazyAmazingDesigns]

@@josehernandez5396 You would need to leave a computer on, that is connected to the ATEM on the Local Network. Then Remote Desktop to that computer when you want to control the ATEM. -Nathan R

[@dayspringministriescogic7380]

When streaming our church service the picture idarke than when I use my iphone, how do I fis that?

[@CrazyAmazingDesigns]

What cameras are you using?, What Switcher are you using?, How is your Key Lighting on the stage? Email me if you'd like. -Nathan R

[@MinisterGailApostolic]

Using Mac for Restream, connect with USB C back of ATEM blackmagicpro. Using 2nd monitor to display all the plugins at same time. How do we connect a Projector to a screen {noTV} up front {needs the INPUT} on ATEM?? 2nd PC is Windows using as PREVIEW shot. Where should we plugin all to back ATEM? Help?

[@CrazyAmazingDesigns]

Hi, So you are sending the ATEM Program feed to the computer via USB-C for streaming with Re-Stream. Then you have an input to the ATEM Mini Pro from a computer, and I'm not really sure what the issue is. Can you share more? :) Thanks! -Nathan R

[@MinisterGailApostolic]

@@CrazyAmazingDesigns ATEM hooked up to MAC via USBC, 2 cameras, mic, MONITOR full plug in screen, 2nd windows PC for in-house videos, does the projector go to the ONLY "OUTPUT" HDMI CONNECTION? Where do I plugin the 2nd PC Windows ? Where do I plugin the MONITOR showing all the full screen Preview, Program, Cam 1, etc pages ? Need to know where to plug everything in. we lost the INHOUSE video when we switched to RESTREAM & quit using the QUICKTIME in the MAC for inhouse video... what are the MAC connections when using ATEM Blackmagic PRO? and where should all the other connections go when using a PROJECTOR & not TV for OUTPUT inhouse

[@CrazyAmazingDesigns]

Hello, I'd love to dive into this with you but this sounds like a larger conversation than we can practically have inside this KZbin Comments Section. If you are able to book a Zoom Training with me, I can get all of your questions answered. With a couple of sessions we could probably even get things working how you'd like. Crazyamazingdesigns.com/training -Nathan R

[@MinisterGailApostolic]

@@CrazyAmazingDesigns i will get back with u heading to church now, to review all plugins again

[@jesuscarrero4624]

I have a question in our church we use two computers one for OBS and other one for pro presenter. With the obs with project the cameras on the lateral screens but on the main screen we can’t put the cameras. What can I do to be able to project cameras in the main screen .

[@CrazyAmazingDesigns]

Hi, If you'd like to show cameras on the screens I'd suggest using a Hardware Video switcher such as the ATEM Mini Extreme, or the ATEM Constellation switcher. Bring in the graphics and cameras to the switcher, Then send the ATEM output to the screens. Basically, build the Live Stream Locally, then use that on the screens. Don't try to create a separate feed. If you used the constellation switcher, you could bring in ProPresenter, + cameras, then send output 1 to the side screens, and output 2 to the center screen. Now you can use a StreamDeck to switch between showing cameras, and ProPresenter on each screen being fed from the switcher. -Nathan R

[@RodneyBritton-o5l]

How do I feed my chameye controller into my ATEM mini pro? They are on the same network?

[@CrazyAmazingDesigns]

Hi! You can use your Chameye Controller to control the motion of your PTZ cameras. But you will have to run HDMI cables from the cameras to the ATEM switcher to input signal. Note: if you are going more than 10ft, you will need to convert the HDMI signal to SDI and then back to HDMI to connect to the ATEM switcher. -Nathan R