Juki MO-6814S threading - SewingGold.com

[@suachuamaymay]

Your guide has been great, always supporting you

[@Sewinggold]

Thank you!

[@mariamkeita4531]

Excellent straightforward video. Nice and short 👌

[@Sewinggold]

Glad you liked it!

[@iam2615]

Please do a video on thread tension settings.

[@Sewinggold]

That is not really possible. There are no numbers on the tension dials to reference.

[@iam2615]

@@Sewinggold Thank you for the reply. Yes there are no number on dial. But the stitch can be used as reference i.e if thread tension is low then the stitch on fabric looks like this. And if tension is high then stitch would be like this. Thanks

[@dianaochoa5550]

This video saved my life…. Thank you so much guys sin lo máximo 😍🙏

[@Sewinggold]

Happy to hear that.

[@indieanna8007]

I started to learn how to thread this tonight at my job. This is super helpful! I'm gonna get some tweezers tomorrow and I'll be unstoppable! 😮

[@sarasallam78]

So we start by threading the lower looper not with the upper looper like the domestic ones ?

[@nicolasmith1460]

Great video but I’m surprised any of these are sold. What a bloomin nightmare

[@romangladiator1106]

Great tutorial. Thank you.

[@kasiajablonska1835]

Thank you, Steve! This is exactly what I needed :)

[@prostoichelovek128]

Спасибо, за подробности, на работе сижу за такой машинкой, очень сложно заправлять эту вторую нить 🧵 особенно под лапкой, сложный трюк получается, не могу сразу попасть в дырочку косую, хоть бы придумали какие нибудь маленькие крючочки, чтоб легко было вдеть нитку в дырочку😂

[@jeannettewilson7145]

Could you do a video on where to find the tension adjustment nut on the 6814s, the manual is not very clear. Thank you

[@Thuraya2021]

Hello Just used my Mo6814s for the first time and it’s going in reverse any help to fix this would be greatly appreciated thank you

[@madinaakilbekova8962]

Thank you very much! It is so helpful 😊

[@ashtinjackson5452]

The dials, is that set for knit fabric? I can’t figure out the correct settings

[@moniquerene1504]

Hi, do you have a video on the thread spool. The set up?

[@chrisboyd3626]

Must you thread in this particular order? For instance, if one of your threads break do you need to pull the needle threads out and start again with the lower looper first?

[@Sewinggold]

If a looper thread breaks, you should remove the thread from the needles. Just the eye of the needle.

[@sarasallam78]

Hi , does this machine do a rolled hem ? Thanks

[@omarcarrillo5303]

Thanks Steve!

[@Sewinggold]

You are most welcome.

[@MAqeel-k8k]

Bhi jaki 757f machine ka dhaga kis Tara dahlna ha

[@PhiriNoel-iw5bj]

I want this kind of juki machine help Guyz how a l can get it?

[@Sewinggold]

Here is the link on our website: sewinggold.com/product/juki-mo-6816s/

[@michaelmoore1557]

Would you mind sharing what size needle and thread are you using? I fear I might be using the wrong sizes for this machine.

[@Sewinggold]

The machine uses DC27 or B27 needles. You can use size 9 to 16.

[@johnettablack4108]

How to install needles

[@K.M.A33]

Super 👍

[@MdHabib-mv2kp]

Very nice

[@mohdshahidhussain7434]

How much price for jhukki

[@farhadfadayi7389]

great video. thanks

[@Sewinggold]

You are most welcome.

[@xant4141]

Thank you

[@Sewinggold]

You're welcome

[@rejanedosreispereira9877]

Thanks so much ❤

[@SheenaPunjabigirl]

Does this machine do rolled hem too. I have 5 threads.

[@Sewinggold]

You can do a standard 3 thread with your MO-6816S, not a rolled hem. The Juki MO-6804S-0A4-150 and MO-6704DA-0A4-150 are made for rolled hem.

[@SheenaPunjabigirl]

How much those machines are?

[@KarthikKarthik-xm1go]

Thankes

[@bhumisahu389]

Thanks

[@Sewinggold]

You are welcome.

[@paopao4167]

muchas gracias :)

[@Sewinggold]

You are most welcome.

[@Happyboy-i3m]

thank❤

[@GfdCcx]

Price

[@cnzoon7344]

Praise kitani hai

[@LungileDladla-dj3ns]

How much

[@Sewinggold]

Currently $1450 plus $135 shipping.

[@aliranjha7899]

sir i do this work i am the master of this job please give me work

[@lucky_neha3716]

Super

[@Sewinggold]

Thanks

[@dianegoo6438]

A little more narration would have been nice