SFX1000 pool pump repair

[@RalphGrant]

I can’t thank you enough for making this video. Not only did it solve the problem, but your explanation was clear and thorough…I was even able to get the product number from your Lowe’s receipt! For anyone who’s interested, it’s 44748 for 1/8” brass rod

[@bobganoosh5520]

Glad it helped. Happy swimming.

[@annamariewelsh9520]

Ralph, did ur water test come back to show high metal?

[@fishergenevieve]

I'm so glad I found this video! That piece of brass is $6.99 now but totally fixed my pump today! You're a life saver!

[@christopherlogan4917]

This video is a definitely a money saver. I was getting ready to purchase a new pump, no need to now. Thank you!

[@darlenemerrill5877]

I bought my pool last summer and only used it for 2 months and this summer for about 2 as well and my pump stopped working and it was humming but not working so I found you're video as I was searching to try to fix my problem and I purchased the brass round and cut it to size and boom it's working great now ty so much for you're video now I can enjoy the rest of the summer. I contacted the polygroup company that makes my pool and they would not replace the pump or the rotor assembly as the warranty was for 6 months even tho I didn't use it for that long. I paid almost 600 dollars for it plus chemicals, sand and everything I needed to set it up. I won't purchase a pool from them again I will get a better pool next summer. Again ty so much for you're video without it I would be spending about 40 bucks for the rotor assembly and now everything is just peachy :) :)

[@bobganoosh5520]

Glad this helped you and you were able to repair the pump. Have fun 🍻

[@Debjgl]

Thank you so much for this video! I was going to go out and buy a $200 pump and I decided to give your fix a try but didn't think it would work because I'm not very handy when it comes to fixing things, but sure enough it worked great! My Canadian Tire sells the Hillman 1/8 inch x 36 inch brass rod (but that brand is not listed on the online site) and I just took it to their auto service desk and asked if they had wire cutters to cut it to exactly 3 5/16" (8.41 cm) and they cut me a couple pieces. I didn't take the bottom piece off of the pump because I couldn't get it off so I just unplugged the pump and worked from the top pulling that magnet out with my fingers and doing the rest of your steps. I cleaned out all the debris from the blades and I put the flattest piece of the brass rod at the bottom of the pump and the top was cut a little crooked so I did what you suggested and sanded it down a little bit on concrete to smooth the edge. The pump works better than it has in a long time! For those of you that are having trouble getting the black round stopper plug to seal the sidewall pool hole while working on the pump just put Vaseline around the edge of that plug and it sticks in place nicely. Thank you again for this awesome money saving video!

[@bobganoosh5520]

Glad it helped. Nice tip with the Vaseline 👍🏼

[@nicu103]

Rob, my friend - you just saved the rest of my summer! Can't thank you enough for your video. I'm pretty handy, but I gotta admit - knowing I had to deal with a pool pump was an 'Oh s**t' moment. So easy. Well done. From my whole family here in Long Island, NY.....THANK YOU!!

[@bobganoosh5520]

Glad to hear the video helped you out. Great job on fixing it yourself 👍

[@nickphillips4863]

Most useful video on KZbin ever.

[@bobganoosh5520]

Ha ha. Appreciate the support. Have fun in your pool 👍

[@titoborbon6494]

@@bobganoosh5520 went to Lowe's, they did not have it. Maybe HD I'll try but thx so much because I wasn't sure if the shaft was broken but after seeing your video I checked it and sure enough one end was smooth the other was jagged and slightly sharp. So, you Da man!

[@courtneybeeson1753]

Its so EASY and it WORKS! I am not (but becoming) a handy housewife and this saved us $170. Our 2nd pump just broke and I was ready to buy another one because I didn't know what else to do. I watched this video earlier this afternoon spent $1.59 for the brass rod, worked on the pump for about 15-20 mins and now my pump is working as good or better than new. Thank you so much! Great advice and great video.

[@bobganoosh5520]

Glad it helped you out. Thanks for the positive feedback 👍.

[@roblilley4680]

Robert Badilla, thank you so much! You saved me from either buying a new pump or trashing the pool! Picked up the exact brass rod at lowes and it worked perfectly!

[@bobganoosh5520]

Glad to hear. Great job on the fix 👍

[@naasiak1]

Mine will only spin a few seconds then stops again

[@rcrum9176]

I bought my Summer Waves pool last year and had no problems with the sfx1000 pump all season. I went to open my pool this year and the pump would start to turn on, but wouldn't. I took everything apart thinking it was a broken pin (mine looks to be plastic) and the pin looked totally fine! Upon a closer look though, the top end of the pin is just barely rounded on the edges. So I figured I'd take a chance and flip it and put the good side on top. It started working immediately! Thanks for the great video info and comments from everyone!

[@pattigoodman4046]

Omg, you saved us a boatload of money! We just knew it was the pump and was about to shell out almost $100! It was cheap, simple and quick! The only thing, we had to partially drain our pool because we didn't have a stopper, but that was no biggy! Thank you so much!!

[@sebastiandinapoli3912]

I’m so happy I found your video. I snapped the rod but had no idea how to fix it. So bought a new one for $180. And after a few days the new one snapped. I was about to SNAP myself and then I found you! Thank you.

[@thebearshikingoutdoorsmans3060]

Cut the end off the top of a fiberglass fishing rod, it's the same diameter as the ceramic rod

[@krystaldaniels7940]

@@thebearshikingoutdoorsmans3060 ohhhh great idea!!! Ive been trying all kindd of different things from insukated copper wire to gang coat hangers! Lol

[@martybustamante7251]

YOU ARE THE MAN!!!!!! That saved me from a $180.00 purchase!!!! Followed your instructions and like a charm worked right away! Thanks for the info!!!!

[@bobganoosh5520]

Awesome job. Glad it helped you out

[@wesavelawns2406]

I want to thank you very very much for your video I fix my pool pump for 4 bucks instead of almost buying a new pool pump motor and I decided to watch KZbin and see if anything was on there and I came across your video a million thank yous my friend. You just save me a hundred bucks

[@07huskers]

Very helpful video! A pretty good symptom that it’s this problem is that if your pump is still running, it’ll make a heck of a lot more noise than usual

[@roycarnes5279]

2nd season of use and my pump ran for about a week then, as described, just the “hum” of the motor and no water flow. Found this excellent video but then found on disassembly that all the fins of the rotor were sheared off! And yes, the ceramic rod was broken. So, had to buy the replacement impeller and immediately made this mod before installing, using the new ceramic one for exact measurement and saving it as a backup. It ran for about a day then quit working again. The new rotor had a piece of the plastic sheath covering the strong magnet missing. Perhaps I had not aligned it properly during installation or maybe some large debris caused it. So, I removed all the sheath, careful to not damage the ends. This was not easy by the way. Smoothed everything with sandpaper, reassembled, tested as before then reinstalled. All seems to be working fine - time will tell. Thank you, Bob!

[@bobganoosh5520]

Great troubleshooting on your part. Hope out lasts for you this time 👍

[@Kris_4814]

Thank you so much! So glad I found your video. My pump only ran for about 16 hours and the ceramic rod snapped. With all this Covid business every part for the pumps have become super expensive. You're a life saver! I thought our summer swimming was over!

[@bobganoosh5520]

Wooohoooo. Glad you were able to fix it.

[@tonyadean6117]

Hi!! My pump wouldn't even power on this morning...I checked and the ceramic rod was broken. I just got back from Lowe's from purchasing th we item you showed on your receipt. I have a question...will the broken rod prevent it from even powering on...any type of power at all? This pump is barely 6 months old and has been working fine. I pray this piece helps!!

[@bobganoosh5520]

@@tonyadean6117 hi Tonya. With a broken rod, the pump should still power on. It won't physically turn, but there should by some sort of noise/vibration. My friend's pump had debris on the rod and it completely shut the pump down. My buddy thought it was electrically damaged. After cleaning the rod/pump, it fired right up. So it could possibly be the case for yours as well. Good luck.

[@tonyadean6117]

@Bob Ganoosh I had to clean a lottle.bit of condensation down in the bottom of the housing...did the *brick* trick of smoothing the ends of the rod....It is working now!! I may have to dry out my pump *plug* housing...i see a little bit of condensation in the reset/test areas... So the hubs is going to do that for me!! Thank you SO so soooo much!! Wish I had found your video 3 new pumps ago!! Lol

[@eduwigespalmer2984]

May 15, 2022 I just finished fixing my pool pump following your instructions. The problem was the ceramic rod, just like you said. It’s working perfectly!!! Thank you so, so much. Greetings from Poteet, Texas :)

[@bobganoosh5520]

That's awesome. Glad it helped. Happy swimming.

[@jessicageorge6444]

I have bought multiple replacement pumps before getting sick of it and I just fixed every one of them with this video lol! Thank you!!!!

[@JoseGarcia-kg9ox]

I was getting ready to buy a new pump til I came across your video. Thankful I did!

[@exploringwiththerebel7101]

Thank you so much. $1.79 brass rod from Ace and I'm back in action. I had the broken spindle for a while. I knew it, but it kept running. Then yesterday the pump just seized up. I could hear it hum and could tell it was pulling some amperage, but the impeller was stopped. I tried to free it with my hand and it strongly flicked my fingers. Went to get the brass rod, and it's good to go! Thanks again.

[@cassadiecollins]

So, I've had mine up since the end of May it recently stopped working and was just humming my ceramic rod was not broke but taking it apart and cleaning the pump out it self and taking all these parts off in this video actually just made it work again. So this video is very very helpful!!

[@bobganoosh5520]

That's great news. Glad it helped you. All it takes is a single strand of hair to lock these pumps up. Nice job 👍

[@blancaawrey417]

Ours broke in 3 pieces after 8 HOURS of use, brand new out of the box! So it’s still happening with the same problems in 2020. Thank you so much!! Went to Lowe’s and got the exact same brass rod as well. Pump works just fine.

[@bobganoosh5520]

Awesome. Glad you fixed it. Those ceramic rods are garbage. I just had to replace my first brass rod. It lasted 3 full summers. 3 summers is definitely better than 8 hours. Lol. Just keep the extra rod for future repairs.

[@barbaragoulden7486]

Thank you so much for making this video and checking with the pool company!! I couldn’t for the life of me figure out why in the world my pump wasn’t working when it worked just fine last summer. I replaced my ceramic rod with this brass one and it works great. Thank you again so much!

[@bobganoosh5520]

Awesome. Glad I could assist.

[@cowboyluke1706]

Old pin was snapped Put the new pin in turned it on it hummed for a few seconds no water pumped then nothing, Prior to the new pin it would at least go on. It was worth a try but this is a piece of sh*t . When you start looking for new pump parts etc after 4 months and see so many people with the same issues well like I said, POS. Thank you for the video very kind of you to help people out. Part 2: edited the next day OK next day I took it apart again. I must have done something wrong with top washer for 1 thing. Also in video I didn't realize at bottom of shaft there is a washer. I also had a shaft from a pool from several years ago. I cut it to recommended size and started over. Boom ! Pump kicked in immediately and works better than ever. HUGE SAVINGS as I was not thrilled about buying new pump at almost what the pool cost. However this does not change my thoughts as stated above re: this thing : It still is a POS when you need to replace pump parts after a few months . It's common as we see here. Fortunately I and others were very lucky to find this video !! Thanks again for this video.

[@RyanProvost1991]

Thank you for this. My pump did this within the first 3 days. Saved my sanity. Cheers man For those whose pumps arent working, the motor is completely encase so if your pump is not working its probably a 90%+ chance its this

[@charleneblack2792]

Our pump stopped, so my husband took the bottom off and found out the gear was getting stuck. Super simple fix and saved us $80. I hope it continues to work!

[@bobganoosh5520]

Awesome. Happy swimming.

[@stephenhenderson4174]

This works!! Visited my local Fastenal, bought the rod, cut to specifications notes in the video description and the pumped worked!! Thank you!!

[@bobganoosh5520]

Awesome. Glad to hear. 👍

[@k__stone]

Thank you so much for this, we fixed ours today! I honestly didn't have high hopes of it working (not because of your advice, but because things generally don't work out so easily/cheap for us). I was so incredibly excited to see that water filtering through again! 🙌

[@bobganoosh5520]

I know the feeling all to well. Glad you got it going again. Keep the spare rod. Because the metal rod snaps as well. Just not as easy. If for some reason it doesn't work after replacement... Your rod may be too long (shave down) or the ends might not be smooth enough. Just grind on concrete floor if needed. Happy swimming

[@k__stone]

Bob, just wanted to say thank you again. We still had the remainder of our rod from last year and a couple weeks after setting up the pool this year, it snapped again. Even easier to fix than last year as the rod was on-hand. Your video is saving us year after year!

[@dawnstears2960]

So here we are during covid pandemic & if you can find a filter replacement...major price gouging going on, ugh! I came across your video and wad able to fix yhe pump! Big thank you!!!

[@bobganoosh5520]

Glad it helped you 👍

[@johnsires3512]

I did this and it worked. It was amazing. Thanks so much for sharing this.

[@tamps2147]

I had this problem today opened it up and my rod had water balloons n hair stuck on it. Took all that off my rod was not broken i put it all back in and it work just fine. Thanks your video help me alot. It all took me like 10min n got it back to work.

[@bobganoosh5520]

Good find. I tell people, 1 strand of hair can lock these pumps up. Happy swimming.

[@jd9525]

You are a lifesaver !! Followed every step and the pimp is no working !!! So cool !

[@bobganoosh5520]

Ha ha. Nice work 👍

[@aimeeschultzfeuser9391]

THANK YOU!! Saved me a lot of headache and buying a new pump.

[@maggie112969]

I talked to a person that works for that company and they suggest to run the pump 6 hrs a day, to NOT use a timer and specially don't run it when ppl are swimming it makes the motor overwork, if you want to avoid buying another brass rod or motor and last a long time you need to follow the instructions:) but I really LIKE this video it saves a lot of money.... Thank u sir 🙂😉

[@bobganoosh5520]

Great info. Thanks for sharing. Hopefully others read this as well.

[@dasledogg64]

Thanks brotha! Excellent breakdown of everything. You saved us all so much money. You the real MVP!

[@bobganoosh5520]

Glad to assist, my friend! Cheers.

[@CobblerBob]

Thank you Bob! Replaced it, and the pump is better than new! You saved me $100++

[@bobganoosh5520]

Awesome. Keep the excess/spare rod. Even though its metal, can stil break again. Happy swimming.

[@lavastruse]

The best video yet on this pump and pool! Awesome! I also dropped the plug into the pool! We replaced the GFCI plug bc ours got wet and stopped working. But the pump is rattling and this might be why. Thank you!

[@IDKgeorge2]

How do you replace the plug? I see condensation in mine and it won’t turn on

[@stevecollins3294]

Thank you for this video! The ceramic pin broke off in the rubber tab inside the housing. It was only 1/4” in. Used the brass rod and fixed the issue!

[@bobganoosh5520]

Awesome. Happy swimming

[@tonifountain3321]

Thank you for this information. You just saved me 96.00 I was able to fix for 1.58

[@argentino901]

Thank you Sr!! you saved me more than $150..easy and cheap fix..

[@bobganoosh5520]

Awesome. Glad you were able to fix your pump.

[@Fosters1676]

thanks i took a pic of your lowe's bill got the rod to repair my pump.

[@bobganoosh5520]

Sweezy. Good luck.

[@HectorPerez-mu7io]

I did the same thing and found the part it was the last one.

[@sarahpasowicz6994]

Thanks for the tip! Worked great! And saved a lot of $! Did notice our rod was 3in. And needed to make a little point at the end so it will stand up and rotate! Thanks so.much!

[@Alex-The-Working-Class-Hero]

What was the thickness of the rod?

[@laurenmac]

thank you. i was able to fix my pump after watching this video. the shaft and impeller had broken on mine so after buying those 2 pieces it was a quick fix.

[@bobganoosh5520]

Awesome. Nice job 👍

[@sharonjohnson7152]

Where did you buy the impeller?

[@laurenmac]

@@sharonjohnson7152 I've actually bought 2. Both online. One was from ebay and the other was from the polygroup website.. but its getting harder to find the right impellers that don't cost half the price of the pool.

[@laurenmac]

Also I commented at the end of the last summer so I didn't have to use it much at that time. Since opening the pool this year I bought the 2nd impeller and have went through probably 20 shafts. They keep wearing down after a few days so My husband ended up buying a stock of the brass and he cuts them to size and replaces it every few days when the pump quits working

[@sharonjohnson7152]

Thanks for the info Lauren! All I have seen is the whole motor for $126. and people are mentioning a $30. impeller.

[@Epicgamer22222]

Thank you for making this video!! Most helpful! I found the broken ceramic pin and I'm headed to Lowe's in the morning with a snapshot of your receipt w/ dimensions of the brass pin. You saved me so much time, aggravation and money. BLESS YOU !!😊

[@bobganoosh5520]

Glad to help. Happy swimming.

[@wandadavid8856]

I did it Bob; with your help of coarse😉. 🤞 That it'll hold up. Thank you from a momma of four married to a man who makes me do everything myself.

[@wandadavid8856]

Still working....

[@wandadavid8856]

The brass piece snapped and so did 2 rotor blades. Im bummed.

[@nicolel1710]

Thank you for videoing this. I have the same pump, and it just started making a racket and the water isnt pushing out. I bet you this is exactly what's wrong with mine.

[@bobganoosh5520]

Yeah you are probably right. Good luck, hope it's an easy fix for ya. 👍

[@nicolel1710]

@@bobganoosh5520 thank you again! Awesome video. Really appreciate it!

[@raymaioli1202]

Thank you. This really saved the day

[@chozen79]

Thank you so much for this video!! Saved us from buying a new pump!!

[@bobganoosh5520]

So glad it helped you out. Great job on fixing it yourself 👍

[@arekkwolek4286]

And it’s done, mine cracked into 3 pieces, little tiny piece was in a upper rubber seal. I cut it on 3 5/16” length inserted and it’s working like new again, nice and quiet, thanks again😀🤛👍

[@josesoto5100]

THANKS BRO...YOU SAVED SUMMER AND SAVED ME MONEY. I WAD GONNA COUGH UP THE 200 FOR NEW PUMP....ONCE AGAIN, THANKS

[@bobganoosh5520]

Hell yeah. Fo sho, partna. Happy swimming.

[@biancanunez7291]

I did what you did today and it worked!! Thank you for this video!

[@bobganoosh5520]

That's great news. Glad it helped.

[@amandagrosso8879]

Thank you for this video.. very good explanation on how to fix the problem I think my filter has.

[@bobganoosh5520]

Hope it solves your filter/pump problem. Good luck 👍

[@jasonmeisner7934]

Thank you!! Just to add on, i did not have the rubber stopper. You can make this repair without removing the pump if you dont mind getting your arm wet. Thanks again!!

[@96superneon1]

GREAT video!!!! Just did this today and my pump is going strong!!! Thank you so much 🤝👍

[@bobganoosh5520]

Awesome. Happy swimming.

[@jamiewhitten9716]

You are the man. Saved me $160

[@jamiewhitten9716]

Found a prepacked 6inch piece for $2.70 at Lowe’s

[@bobganoosh5520]

Glad to hear. Great job on the fix!

[@ron6798]

Thank you sir.You saved me time and money.

[@auxpower13]

Bob, thank you for the thorough explanation and R & I instriction. As an engineer, I can say that ferromagnetic steel would probably be a poor choice but a non-magnetic stainless alloy would probably hold up well. Understanding that Aluminum might be too weak in bending, I am wondering how the brass has held up.

[@bobganoosh5520]

After a season and a half the brass is in great condition, and the pump is running strong 👍

[@krystaldaniels7940]

Thats one thing i was worried about when searching for something to use as a rod. The magnet im mine is sooo strong

[@shadwell749]

I just got this pool yesterday.I am doing this mod before I even set it up.Thanks for the advice.

[@bobganoosh5520]

Let it ride. Your ceramic piece may not break. But if it does, you'll know how to fix👍

[@thebearshikingoutdoorsmans3060]

Use the top section of a fiberglass fishing rod cut to fit it's works better

[@Tina_andyson]

I just got my kids a pool last month and the pump just stopped yesterday! The humming it was doing makes sense now! Thank you for the step by step video I'm going to try this tommorow.

[@BOB24502]

Thank you sir! Thanks to inflation, 5 years later that $3.04 brass rod is now $6.48. Still much cheaper than replacing a pump, but pricing double in 5 years??? That's insane.

[@marzate8722]

Hey Robert, thank you so much for your help it work my bump is working again thank you so much

[@bobganoosh5520]

Glad to hear. Great job. You just saved yourself some good money👍

[@chrisjanecekmusic]

This was great man. Saved me about $150.

[@bobganoosh5520]

Sweezy. Glad to assist 👍

[@jkahne9]

3.56 fix. Thank you so much. Perfect fix

[@titoborbon6494]

Just the perfect video that I needed to see, thx so much!

[@bobganoosh5520]

Glad it was able to help you out.

[@titoborbon6494]

So yes, I misunderstood the ceramic rod for the brass. Me fix it .

[@millermatic140]

I figured this out before watching this video but it clarified it. A week after buying the pool that little rod snapped and the manufacturer was going to honor the warranty and send a new pump but they wanted me to take a picture of the receipt and take a picture of the pump with the cord cut with scissors🤦🏾‍♂️ and they would deliver one in ten days

[@bobganoosh5520]

That's a lot of work to honor a dang warranty.

[@millermatic140]

Exactly

[@bobganoosh5520]

@@millermatic140 what you should do is use the pump for this summer, than at the end of the season, cash in on the warranty and get the new pump 👍. Good luck

[@lisettemedina4536]

😢 im gonna need the entire rotor as mine just stopped taking in water emptied out the skimmer and found 4 pcs broken pcs that look like they go to that propeller looking thing. On another note your video will now help me just take apart the entire thing and replace that rotor unit thanks!!

[@bobganoosh5520]

Ahhhhh, bummer. Good luck. Let me know if you need help finding a replacement. Good luck .

[@lisettemedina4536]

@@bobganoosh5520 thanks! now i see that they sell the entire rotor however what is actually broken is the propeller looking things is that pc alone replaceable?

[@bobganoosh5520]

@@lisettemedina4536 I see they do sell certain impeller by themselves, which shows certain rotor assemblies are capable of swapping out the broken impeller. But I don't know if that requires a special tool or if it applies to your model pool pump.

[@lisettemedina4536]

@@bobganoosh5520 I see! Ok I think my best route is to just get the entire pc and call it a day I believe Amazon has one for about 40 bucks I just hope It will fit into my SFX 1500+ unit although reviews do say it does! Wish me luck!!! 🙏

[@bobganoosh5520]

@@lisettemedina4536 definitely. Just verify that they do returns in case it doesn't fit. Hopefully your up and swimming soon 👍

[@arekkwolek4286]

great fix, I'm going to Lowes right now, thank you :)

[@bobganoosh5520]

Awesome. Good luck on the fix 👍🏼

[@judrayton]

Very informative video. Thanks for posting; It helped me a lot!

[@bobganoosh5520]

Glad to hear 👍

[@karendevries3834]

Thanks for your video you really saved us. During covid-19 it's hard to get anything and the pool is something the kids can do. We able to fix ours with a steel pin my husband found in the garage. AWESOME 👍

[@bobganoosh5520]

Awesome. Glad to hear. I would suggest checking the steel pin a few times throughout the summer just to verify it doesn't rust/corrode. Not sure how steel does in the water. Happy swimming 👍

[@sandstonefarm5722]

Mine did the same dam thing I just upgraded to a intex sand filter its awesome pool has never looked so clear

[@bobganoosh5520]

Awesome. I wouldn't mind having a sand filter system.

[@sandstonefarm5722]

@@bobganoosh5520 I found mine on Facebook market place at end of summer for 25 dollars works awesome pool has never looked so good

[@bobganoosh5520]

@@sandstonefarm5722 awesome. That's super cheap 👍

[@dnnclrk221]

I was about to buy a pump for 180.00 but then i saw this video. Im going to try ro fix my pump this weekend ill let you know the results. Im excited for this 4 dollar fix vs 180

[@bobganoosh5520]

Awesome. Good luck 👍

[@Lia2222]

Did u fix yours? What was wrong? We're looking for solutions

[@travisp8388]

This video was a lifesaver. Thank you for the video.

[@bobganoosh5520]

You got it. Happy swimming.

[@oldschoolgamer2337]

Great vid man.. I think i might have the same issue . I just filled up my pool yesterday. Plug in the pump and it didnt start .. mind you I just got this pool last sumer from wall mart. I guess i have to take it aprt and look in the pump to see if i have the same issue . I do have a extend warranty on it tho. Keep up great job.

[@juliaeureste1554]

Mine stopped working n I had the extended warranty, thank God. They just sent me the entire purchase price since they said it could not be fixed. Good luck

[@shadwell749]

Mine just quit working after about a month.I did this to mine as soon as I got it and still messing up.at least I have extra rods.

[@randyclevinger7571]

Thank you! Saved me $100 today!

[@bobganoosh5520]

Glad this helped. Happy swimming.

[@sweetnsalty4602]

Fingers crossed this will fix my pump, it won’t turn on at all. Thanks for the video!

[@bobganoosh5520]

Good luck. 👍

[@erinblackburn278]

I’m dealing with the exact same thing. It will not turn on at all. Did your pump ever turn on?

[@sweetnsalty4602]

@@erinblackburn278 So I checked the piece that he’s talking about in the video and mine was still intact. I bought a replacement plug from Amazon it was about $16 and now it’s good as new!!!

[@sweetnsalty4602]

@@erinblackburn278 WELLONG GFCI Plug Replacement 15 Amp 3 Prong GFI Waterproof Circuit Breaker UL Listed for Pressure Washer Pool Pump Hair Dryer etc Black, Medium

[@bobganoosh5520]

@@erinblackburn278 great info from Rachel about the GFCI replacement. But before replacing the electrical, verify that the rotor assembly isn't locked up by hair or a twig/leaves. If the rotor can't turn, the pump will not turn on. It does not take much to stop these pumps.

[@jilleverett5144]

Thank you so much for this video!!!!!! This fixed our pool problem.

[@bobganoosh5520]

Glad it helped you out.

[@dougcepress7734]

I took a paint roller which was stainless steel and cut a piece out of the roller to replace the pin, worked awesome!

[@bobganoosh5520]

Awesome. Good idea. Just monitor occasionally for rust build up. 👍that's pretty crafty

[@hesonfire3074]

This worked out very well... Got it working again!! Thanks!!

[@bobganoosh5520]

Awesome 👍

[@blaynscott5545]

I want to punch the 48 people who downvoted this video in the face. Great video and saved a bunch of people money.

[@emmaramage8412]

Thank you so much! We followed your video exactly and it worked perfectly! You saved us so much money!!

[@bobganoosh5520]

Emma, so glad to hear the video helped you out. Great job on fixing it yourself 👍.

[@bachmeister]

Great video... I was going to purchase a new pump... 👍👍👍Thank you very much

[@heidimorris3313]

Thank you for the video..saved a tin of money.

[@bobganoosh5520]

👍

[@912Cobra912]

Wow...this is a great money saver...great video!

[@chillbilly2517]

That was the problem Wow cheap, too easy fix. Thank you.

[@bobganoosh5520]

Awesome. The metal rod can break as well, but certainly way more durable than the cheap ceramic. Happy swimming.

[@bradbeasley1607]

Thank you so much for info,my boys said your the man...Beaz

[@bobganoosh5520]

Glad you were able to fix it👍

[@carolannbenson2071]

3 days i have been trying to figure our where that plug went and just come across your video thanks… but what was the little rod Called you bought for the rotor motor? Thanks.

[@ronniebostic7035]

How do you get the rotor to sit flat again? I can’t get it to go all the way down. Please help! Great Video by the way.

[@mariaisabelcarrillo7143]

I can’t get mine to sit flat either :(

[@ryanwilloby2540]

Brass rod will wear out and break!! Mine did after 48 total hours of running the pump

[@bobganoosh5520]

Just inspected mine 2 days ago after 1 full summer. Not sure how many hours, but the rod is still in great shape. But I did by a 3ft. Piece for replacement as well. Sorry to hear yours broke. Its still a less expensive alternative to paying $30 for a new ceramic assembly.

[@thebearshikingoutdoorsmans3060]

Use a the top of a fiberglass fishing rod cut to fit

[@shaquanaarrington1192]

The black rubber piece came out and am not sure if I am putting it back in correctly and now its leaking

[@jgame3847]

I did this method but my brass rod snapped after 3 days. I guess it’s never meant to be. Not sure what to do next

[@jgame3847]

Also it made my spinning magnet thing worst

[@beccanotbecky2259]

Thank you! My 6 day old pool pump is fixed!!!!!

[@bobganoosh5520]

Great job. Glad you were able to fix it 👍

[@lucascandy5056]

Thanks that was super helpful! Life saver.

[@JorgeDiaz-909]

2020 and you save my summer thank u

[@bobganoosh5520]

Awesome. Glad it helped you out.

[@andyfarinias8813]

Thank you. This video helped me out alot

[@bobganoosh5520]

Glad to assist

[@corinarose4955]

Exactly what I needed, you rock!! Thankyou

[@trixielloyd]

Thank you for this video! Worked perfectly!

[@crown2royal1]

@bob ganoosh thank you great video. Unfortunately our magnet broke from the fan or spinner:-( but because of your video I was able to buy just the roter part for $30

[@angelazapor5611]

Where did you get the fan part? My rod broke but I think the fan is worn out too

[@Roadie247]

Man thank you SO MUCH FOR THIS!!!

[@bobganoosh5520]

Glad it helped you 👍

[@vamaya]

You saved me so much money! Thank you so much.

[@bobganoosh5520]

Glad it helped you out. Enjoy your summer of swimming 👍

[@tonybower3642]

Appreciate the video. Saved me a ton of money.👍

[@bobganoosh5520]

You got it, partna.

[@peggypatterson4045]

@@bobganoosh5520 just got pool up and going. Good water flow but pump is kinda loud. Is that normal?

[@bobganoosh5520]

@@peggypatterson4045 Is it the 1st time you are running the pump? Just wondering if you have a basis for comparison. As long as there is good flow, the noise is most likely normal. These pumps aren't whisper quiet by any means. If it gets to the point where it's lacking flow, definitely take it apart to clean.

[@peggypatterson4045]

@@bobganoosh5520 think I did not have filter all the way set. Good now. Thank you Bob

[@bobganoosh5520]

@@peggypatterson4045 awesome, good find.

[@marionunez4]

Wow! Thanks for this video . This video was so helpful In fixing my pump!

[@bobganoosh5520]

Glad it helped you out. Just remember, the brass rod can break as well. So keep the extra rod for future repairs if needed. Happy swimming

[@cookiezndirt]

Ok my question is how do you get that bottom back on with it not leaking? I’m having trouble. I have a rubber ring too that goes around the pump in the canister but I can’t figure out how to stop it from leaking