Connecting A PowerFlex 525 To PlantPAX in FactoryTalk View Studio V10 Using Studio 5000 V32

[@ShaneWelcher]

Join Us & Learn More: allen-bradley-plc-training.teachable.com

[@DeepSingh-jg2wp]

Hi Shane, is the procedure similar if not identical with using the PowerFlex 753/755 drives? Of course, you would use the P_PF75x AOI in your program and simply use the VSD/VFD global object in FT View studio. Thanks!

[@ShaneWelcher]

Glad to help

[@robertcanary7155]

I noticed the face-plates use #1 and #2 to designate what is shown in title bar. Where are #1 and #2? Where dose #1 and #2 get its values?

[@ShaneWelcher]

First off, thank you for the support. I appreciate it & hope you are having a great day. To answer your question: They are passed from the parameters of the button that commands the pop-up. I talk about this in the video. Looks like you may have missed it or maybe clicked off the video before it completed. I understand what it is like watching videos. With that said, please make sure you watch my videos in the full length because I try to make sure every detail is covered. Granted, over the past few years, my videos have gotten better. Here is the place to start watching in this actual video where I talk about this. kzbin.info/www/bejne/qHnOpmqCrKZnbsU

[@robertcanary7155]

@@ShaneWelcher I'm sorry, let me clarify. The parameter lists #102 - #104. But where is #1 and #2

[@WalkingWithGT]

Do you have a video for V33 using PlantPAx 5.0 instructions for a PF525 or PF755?

[@ShaneWelcher]

I have a video showing a PF525 using V32 and PlantPAX 4.10

[@ShaneWelcher]

Here are three of my videos using PlantPAX Rockwell Automation PlantPAX Controls In Studio 5000 Version 32 | P_PF52x Program Control Example kzbin.info/www/bejne/emHJdZmqq5dspbc Running a 3-Phase 230Vac Motor from a 120Vac PowerFlex 525 VFD | Rockwell Automation PlantPAX kzbin.info/www/bejne/q3vCXqGpa89lf6s Connecting A PowerFlex 525 To PlantPAX in FactoryTalk View Studio V10 Using Studio 5000 V32 kzbin.info/www/bejne/qHnOpmqCrKZnbsU

[@WalkingWithGT]

@@ShaneWelcher Thank you! Hopefully this helps! Trying to wrap my head around incorporating the PVSD instruction.

[@AlexandreSantos-cb5qk]

Hello, Shane. I'm learning very well with your videos. I would like to know if its possible you explain how to use the PlantPAx Process Library v4.1 Thanks

[@ShaneWelcher]

Thank you, I plan on making more PlantPAX videos in the future

[@Fr4nkSanchez]

Can you control a Vertical Lifter using a P525 with encoder feedback and encoder for positioning? I have done this and typical is all ladder. Using an AOI how can I maniuplate the stoping position?

[@ShaneWelcher]

For one, the powerflex 525 is not the model to be used for direct encoder feedback to be used an an servo axis, to do that you need a powerflex 527. Next, the question about an AOI is an open loop question... please clarify

[@Fr4nkSanchez]

@@ShaneWelcher P525 has an ecoder card option, mostly for motor encoder feedback, universal. I had used an ethernet encoder for positioning in Y axis not really a closed loop like P755 PTP mode but it works. However using an AOI how can I command the drive to stop in a desired position? Lets say my Y encoder goes from 100 to 1000 counts, if I tell the P525 to go to position 500 using the encoder read how can I stop it?

[@ShaneWelcher]

@@Fr4nkSanchez just add controls outside of the AOI to stop it from positions then issue a stop or start command to the AOI

[@robertcanary7155]

Can you use PlantPAx faceplates without the function block?

[@ShaneWelcher]

Yes, the video I did before this one shows standard ladder logic use with PlantPAX

[@robertcanary7155]

@@ShaneWelcher What the name of that video?

[@ShaneWelcher]

@@robertcanary7155 I actually think the full video for that was deleted because of dislikes...sad but it happens. Although, it is just as easy as navigating to your instruction bar & selecting the Add-On instruction then making a ladder routine. Then adding the add-on instruction in the rung. From that point, it is exactly the same as the function block except you don't see as much as the function block from my opinion. I show some of this in this video: kzbin.info/www/bejne/qHnOpmqCrKZnbsU

[@mircopolo]

Rockwell Automation Library of Process Objects: PowerFlex 523/525 Variable Frequency Drives (P_PF52x) Version 3.5 detailed PDF reference manual for this AddOn but the newest version is Revision 4.10.06 Release 2023-02-06 I can't find updated manual anywhere....

[@ShaneWelcher]

Visit the Rockwell Automation website

[@phily126]

Thank you. Does using PVSD in v5 operate the same way?

[@ShaneWelcher]

In V5 which is newly released, there are a few changes but yes, operate very closely to the same. You of course, need to add the color option for V5

[@lambro8052]

Thank you sir , Nice Information . I would like to see the Design, Development of the Above PF525 Project with Plant Pax Tag Substitution ?

[@ShaneWelcher]

I showed that, not sure what you mean show development...these are RA developed Faceplates.

[@vorapobautomation9760]

What is PlantPAX ?

[@ShaneWelcher]

PlantPAX is one of Rockwell Automation's DCS systems. They also have GEMS as a DCS replacement