Shaper Workstation Tutorial

  Рет қаралды 135,899

Shaper

Shaper

Күн бұрын

Пікірлер: 45
@brianmosse
@brianmosse 4 жыл бұрын
So exiting, I have never been so happy to be part of a revolution, it's much more than CNC. I started my apprenticeship in 1971 so I know when something is worth the money and our time.
@arnoldowen7831
@arnoldowen7831 3 жыл бұрын
*exciting
@mikederleth3442
@mikederleth3442 10 ай бұрын
Well done mate!!! I’m ordering mine tomorrow, can’t wait
@RottweilerSen
@RottweilerSen Жыл бұрын
Ik heb er nog nooit 1 in Nederland gezien mooi apparaat ❤👍👍
@FrenchRenovation
@FrenchRenovation 3 жыл бұрын
Just amazing
@steelkatz9750
@steelkatz9750 2 жыл бұрын
I'll never be able to afford these things but still can't stop watching the videos
@bradpreston2756
@bradpreston2756 4 жыл бұрын
This really seems well thought out. Congratulations on your release.
@sputnik4216
@sputnik4216 Жыл бұрын
I watched this video 3x already over a span of a few months. Superior communicator here! This fellow really knows his craft and product! This router and workstation system is futureshock! Amazing! I wonder does he still work at Shaper?
@intoart340
@intoart340 3 жыл бұрын
Brilliant design. This video is making me look real hard at this Origin CNC and work station.
@kiwdwks
@kiwdwks 4 жыл бұрын
Just received mine. Looking forward to all the possibilities Shaper Origin/workstation can provide!
@slhasebroock
@slhasebroock 4 жыл бұрын
Brilliant! Can't wait!
@drmikejean
@drmikejean 3 жыл бұрын
I guess I've been using only 25% of my workstation! You guys thought of everything! Just awesome!
@deedsvp6990
@deedsvp6990 Жыл бұрын
@f.d.6667
@f.d.6667 3 жыл бұрын
Being a chair maker by trade, I must admit that I am quite impressed with this system!
@80211Denver
@80211Denver 4 жыл бұрын
Hey, watching this one I wonder... why spoil board only only on the table side of the work piece? Wouldn't you also want to clamp one to the outside? Might have something to do with the direction of the cut but... dunno
@docfate
@docfate 3 жыл бұрын
Will definitely have to purchase this workstation..
@Riverafo821
@Riverafo821 3 жыл бұрын
Great video ...thanks
@kensly7125
@kensly7125 4 жыл бұрын
looks to be very well thought out.
@nigelhasenbaum
@nigelhasenbaum 8 ай бұрын
One thing I have found that is a problem with this workstation on day 1 was that there is no back support for when you place heavier wood on the shelf. I made a larger shelf top and using bigger materials bends it down. Why no back support? It just hangs off the ledge and has no contact with the back surface that its mounted onto. Huge oversight in my opinion.
@hermanelm
@hermanelm 4 жыл бұрын
como adquirir essa maquina, qual o valor?
@Patrick-pk5pm
@Patrick-pk5pm 2 жыл бұрын
Bonjour, très intéressant et intéressé, comment peut on et où la commandé avec le support origine, je suis français et cherche à savoir où je peut en acheter une , merci beaucoup pour cette vidéo 👋😎
@michaelkidd6080
@michaelkidd6080 22 сағат бұрын
Very informative just wish it wasn’t so complicated
@slaading
@slaading 2 жыл бұрын
Thanks! is there a video where you explain how the dominoes strips are used on the workstation?
@IamtheLordofDoom
@IamtheLordofDoom 10 ай бұрын
Pretty cool. Would have been nice to see it actually working!
@Shapertools
@Shapertools 10 ай бұрын
We use Workstation in most Shaper Sessions! Should be some opportunities to see Workstation being used for a project like the ones you're interested in!
@onwingsofmidnight
@onwingsofmidnight 4 жыл бұрын
I am concerned that the cam fixing for the shelf pulls up towards you to lock. rather than locking by pushing away from the operator, This could mean bumping into the clamp and loosening the shelf inadvertently. A better design would be that pushing away from the oporator towards the bench will only secure the shelf more preventing accidental loosening while you are intent on working on the shaper. Just an observation. Id love one but out of my price range for occasional use.
@unitwoodworking5403
@unitwoodworking5403 4 жыл бұрын
Great and nice, I will try to do it soon.
@ColfaxMath
@ColfaxMath 4 жыл бұрын
Love it
@philippoberholzer6095
@philippoberholzer6095 3 жыл бұрын
i love using the shaper origin so much and now i have a part where i'll be needing this workstation so thanks for the introduction it will help a lot! just one question; can you scan the part that you're working on just by turning the shaper 180degrees? or you just don't scan the part since you lways have the same working space?
@Mansoor013
@Mansoor013 2 жыл бұрын
Yes you can spin it around as long as there is some of the tape in your peripheral field.
@tyronwheatley2306
@tyronwheatley2306 4 жыл бұрын
Very nice 👍
@jd8603
@jd8603 4 жыл бұрын
looking forward to my set 👍👍
@martyn1678
@martyn1678 4 жыл бұрын
if only i was rich i would be really excited for this product
@tinman7743
@tinman7743 10 ай бұрын
Engineering at its best
@nickhall5959
@nickhall5959 Жыл бұрын
I was really hoping to see the Shaper in use rather than just the setups.
@swampflux
@swampflux 4 жыл бұрын
Didn't occur to me until I saw this that I'll be able to combine the shelf with double-sided tape.
@TheAlogoc
@TheAlogoc 3 жыл бұрын
If i ever buy SO, i will made workstation from aluminium extrusion profiles, twice the size of this, half the price.
@voidwareprohibited
@voidwareprohibited 2 жыл бұрын
I'm buying one, and that's what I'm doing.
@matthewwhitehead7105
@matthewwhitehead7105 2 жыл бұрын
Yep... just take my money now.
@girthbrooks4219
@girthbrooks4219 4 жыл бұрын
I FEEL LIKE I TOOK SEVERAL VIAGRA PILLS!!! NEVER HAD A HARD ON THIS STRONG!!
@yossawat24
@yossawat24 3 жыл бұрын
I think shaper tape so expensive. You could redesign to not use shaper tape.
@harveytherobot
@harveytherobot 3 жыл бұрын
The workstation doesn’t use Shaper tape. The pattern is built into the table. Also, you can make your own custom workspaces that reuse the tape you put down. Lastly, the tool needs the reference dots to alight itself. Tape is the most flexible way to do this.
@colinturner6628
@colinturner6628 2 жыл бұрын
@@harveytherobot The tape should be cheaper as a consumable, it's what decides whether the machine can be used or not used, That's Festool all over fleece as much money as they can, not content with the amount customers actually spend just to purchase the tools & machinery. The tape should not be more than £7.50 a roll, and that would still be expensive. When your spending upwards of £3,500 only to give two rolls of tape with the machine is just being downright tight.
@harveytherobot
@harveytherobot 2 жыл бұрын
@@colinturner6628 I didn’t know you had access to all of the company’s financial information and expenses and payroll and marketing costs etc., so that you could determine what a roll of their tape should cost vs what they charge. Impressive. You should inform them of their calculation error right away.
@jtr789310
@jtr789310 29 күн бұрын
This is not a sharper it a router a real wood worker would know the deference. Hate people doing video and lying what the hell it real is.
Shaper Workstation: Overview
9:27
Shaper
Рет қаралды 39 М.
Testing Shaper Origin Handheld CNC Machine
17:25
Michael Alm (ALM FAB)
Рет қаралды 569 М.
coco在求救? #小丑 #天使 #shorts
00:29
好人小丑
Рет қаралды 120 МЛН
Cheerleader Transformation That Left Everyone Speechless! #shorts
00:27
Fabiosa Best Lifehacks
Рет қаралды 16 МЛН
Shaper Origin (+ Workstation) Tips | How To Improve Your Workflow
24:33
Introducing Shaper Workstation
4:48
Shaper
Рет қаралды 147 М.
Inexpensive house in 5 days. Full construction process
35:06
Dad builds a house
Рет қаралды 355 М.
Getting started with your Shaper Origin - A beginners guide
31:12
Play with the shaper origin
17:00
fabien makes things
Рет қаралды 10 М.
How to use The Shaper Origin
23:58
Michael Builds
Рет қаралды 19 М.
Overwatch and Skyrim Inlay with Shaper Origin
20:29
Scott Barron Furniture
Рет қаралды 120 М.