Shark vacuum HOSE repair-Works like NEW!

  Рет қаралды 235,598

Clint Moar

Clint Moar

Күн бұрын

Пікірлер: 120
@j.michaelknighten7039
@j.michaelknighten7039 4 жыл бұрын
Thanks for taking one for the team. The plastic was still tore up a little, but at least I know that it can come apart and how. Thanks again.
@ClintMoar
@ClintMoar 4 жыл бұрын
Your welcome.
@macoeur1122
@macoeur1122 2 жыл бұрын
Well this officially settles it! I can now say I can find just about anything I need to on KZbin! I have already bought a replacement hose/handle once...(the come as one piece) and now it has split as well. if I keep buying new hoses every time it splits, pretty soon I will have spent enough to buy a whole new vacuum. And I hate to throw an otherwise perfectly good vacuum into the landfill over such a small problem. I've ordered the proper bit set (mine are tamper proof) and hopefully I can continue to solve this recurring problem until the rest of the vacuum needs to be trashed. Thanks a million for the video! I really did want to see if my idea is even possible before spending the money on the new bit set!
@ClintMoar
@ClintMoar 2 жыл бұрын
I know, KZbin so great for how to videos! Good luck.
@nonelost1
@nonelost1 2 жыл бұрын
That lavender vacuum of yours looks like an NV 22L. I got one of those that I trash picked last year. No problem with the hose on that one, but I just trash picked a shark navigator model UV410 today, that does have a hose problem. It also needs the bottom of the dust cup, as well as a good cleaning.
@ClintMoar
@ClintMoar 2 жыл бұрын
Hopefully you can get them all working.
@cindiroyer8416
@cindiroyer8416 3 ай бұрын
Thank you so much for this video!!! I am gonna attempt to fix my Shark vacumn hose & I wasn't sure how to get hose out of end piece...thanx 2 your video, I know now!!! appreciate you!!! :)
@ClintMoar
@ClintMoar 3 ай бұрын
@@cindiroyer8416 I'm so happy it helped you. Best of luck with the repair and don't forget to let us all know how it goes!
@jpettymd
@jpettymd 5 жыл бұрын
The little gray and red button... push the button down and use a screw driver to pry the gray part forward and that will slide off. Watch out or the spring will come flying. Once you get that off the collar just slides off and the rest is cake. Thanks for posting.
@ClintMoar
@ClintMoar 5 жыл бұрын
Awesome! Your welcome and thank you for the tip Joe.
@TinaICXCNIKA
@TinaICXCNIKA 4 жыл бұрын
Hey Joe and Clint! I am SO CLOSE to getting that gray ring and last purple part with the red button off (thanks Joe for letting us know how to get the red button off!). Not sure how this is all going to turn out, yet.😉
@btothemay
@btothemay Жыл бұрын
THANK YOU
@scotsabo2716
@scotsabo2716 Жыл бұрын
I looked at several shark hose repair videos before I found this one with the secret sauce. I had the same problem, took screws out but could not figure out how to get the clam shell completely apart. I was depressing the red button and trying to slide the end piece off but wouldn't budge so I figure i'd better do some you tube research before I end up breaking it. Now I see how it comes off I have confidence I can complete this. My only concern is the red button so I will need to figure out if I can get the tube off without removing the button or I will have to figure out how to remove it with out breaking it. Thank you for providing this critical part of getting this hose assembly apart.
@ClintMoar
@ClintMoar Жыл бұрын
You're Welcome Scot. Glad this helped and best of luck on your repair.
@FirstLast-zo4qy
@FirstLast-zo4qy 5 жыл бұрын
Very helpful. Especially loved the index so we could go straight to the part of video we needed to see. Thanks
@ClintMoar
@ClintMoar 5 жыл бұрын
Good to hear and thanks for the feedback Brittany!
@ClintonSr
@ClintonSr 6 жыл бұрын
From one Clint to another, thanks for posting this. :-) I had to remove a very large ink pen from inside of the hose of this same model. After removing the pen, I noticed the grounding wire and plate that I had NOT noted before taking all apart. Seeing how you had it lined up at 6:50 saved the day for me. My vacuum is back to 100%! Great video!
@ClintMoar
@ClintMoar 6 жыл бұрын
Thanks for that Clint! I'm not sure if there would be any problems but it's better to be safe than sorry right.
@teatatuemery24
@teatatuemery24 5 жыл бұрын
YAY Thank you my poor hose was held together with tape on tape up on tape shocking. The amount of money I've wasted having to wait 20 mins for a vacuum shop to fit it and all I needed to do was twist both ends lol thank you so much 😀😄
@ClintMoar
@ClintMoar 5 жыл бұрын
Your welcome. Glad it worked and thanks for the comment.
@kitkelley1908
@kitkelley1908 7 жыл бұрын
Thank you for this tutorial. Very well done. I can now finish repairing my vac! FYI--I replaced those little cheap-ass-rubber-tearing-apart tiny front roller wheels on the bottom with wheels I removed from a Matchbox car sold at Dollar Tree stores!
@ClintMoar
@ClintMoar 7 жыл бұрын
Thanks for the compliment Kit. I'm not sure which wheels you're referring to? I don't think I've had a problem with them...
@Wahinies
@Wahinies 7 жыл бұрын
Thank you so much for taking the time to make abd post this! It seemed like the tubing that was threaded was either glued or fused by heat.. They don't want to make this repair easy lol I had to use brute strength to pull the wire out of the plastic. You saved us time money and above all sanity, thanks again!
@ClintMoar
@ClintMoar 7 жыл бұрын
Glad to hear. I had to use strength to but I didn't want to make it sound too difficult in the video. Your proof it can be done! Thanks for the comment.
@dottiejanowski
@dottiejanowski 8 жыл бұрын
this video was so helpful. thanks. i have a newer shark navigator vacuum but still has a similar design. i had a toy stuck right in the hose at the end where the handle is and got it out by opening it up.
@ClintMoar
@ClintMoar 8 жыл бұрын
Ahh those toys...mine usually gets filled with a toy mixed with dog hair...Glad it helped +followthehendersons
@ragdepc
@ragdepc 4 жыл бұрын
Something you forgot to said in the video is you have to take off the red clip in order to be able to remove the front tube. I just find out after look at your video multiple times. By the way, thanks for your help, before I was sure can not take it apart (Because I try it before and give up)
@ClintMoar
@ClintMoar 4 жыл бұрын
Thanks for the clarification. Your welcome and glad this helped you.
@angelanicholasstonehicks6431
@angelanicholasstonehicks6431 2 жыл бұрын
Great video! Precisely what I needed to see & hear & watch to fix my same vacuum. Well done. Direct information extremely helpful.
@ClintMoar
@ClintMoar 2 жыл бұрын
Thanks for mentioning Angela. So glad it helped!
@danm4935
@danm4935 11 ай бұрын
Thanks for the video. I think i will just replace the top hose with a shark brand replacement.
@ClintMoar
@ClintMoar 11 ай бұрын
Yes, I don't blame you Dan, now that they are making it easier.
@greghollinger9370
@greghollinger9370 2 жыл бұрын
Thanks fella, plastic snap and pop. 😁. Needed that info.
@ClintMoar
@ClintMoar 2 жыл бұрын
Glad it helped. Your welcome Greg.
@zrulz
@zrulz 7 жыл бұрын
You can put a little dishwashing liquid or hair spray on the hose to help it screw all the way into the fitting. You cannot wait long with hair spray or it will get sticky. A little dab of hand soap or dishwashing liquid like Dawn is best. Put it in the threads inside the fitting and a little on the outside of the hose. THERE IS USUALLY ENOUGH HOSE IN THE SHORT BOTTOM HOSE THAT I CAN AFFORD TO CUT ABOUT 3 INCHES OFF AND THEN SCREW IT BACK IN.
@ClintMoar
@ClintMoar 7 жыл бұрын
Yes thanks +zrulz. I have used the dishwashing soap trick to. That would make it even easier.
@dtman66
@dtman66 9 жыл бұрын
Nice video! I have this exact vacuum and went thru exactly what you did trying to get that handle apart, the only exception is I gave up and bought a new handle from Shark. I think it was 20 bucks! Thanks for making this video!
@ClintMoar
@ClintMoar 8 жыл бұрын
Thanks for your comment and your welcome. +dtman66. Yeah, I'm stubborn and would not let the vacuum win!
@ClintMoar
@ClintMoar 4 жыл бұрын
@OneDayAfterAnother thanks for this comment! Sorry it slipped through the cracks and I didn't see it.
@hajerm
@hajerm 3 ай бұрын
great video! thanks for making and sharing :) my Shark vacuum has special star screws :/ not sure how to get those out, not a screwdriver that i have ever seen. Any ideas?
@ClintMoar
@ClintMoar 3 ай бұрын
Even though that looks like a special screw it should be available from a decent hardware store. It may be a Torx that are easily available. Or, it is a special security type screw, then if you go to a specialized "Nut & Bolt" shop, they will have them.
@hajerm
@hajerm 3 ай бұрын
@@ClintMoar Thank you!! that is EXACTLY what they are :) and i see that Harbor Freight sells a set for $6
@ClintMoar
@ClintMoar 3 ай бұрын
@@hajerm Your most welcome. Good luck!
@caseypivarnik4356
@caseypivarnik4356 4 жыл бұрын
Thankfully someone can show us how to get this devil ring off! (Still working on it but at least there's finally proof it can be done!)
@ClintMoar
@ClintMoar 4 жыл бұрын
Yes, there is hope Casey!
@dcfred777
@dcfred777 7 жыл бұрын
Thank you so much for this tutorial this helps so much!! I wish you knew how to get that button off a little easier. At least I know now that I have to pull that part off so I can crack it open I almost complete broke it by trying to pry it apart!
@ClintMoar
@ClintMoar 7 жыл бұрын
Glad to hear this helped you dcfred777. Agreed, the button is tricky.
@cscar1385
@cscar1385 11 ай бұрын
Good video. Thanks for the help
@ClintMoar
@ClintMoar 11 ай бұрын
Your welcome. Thanks for your comment and glad it helped.
@jimmyross4352
@jimmyross4352 5 жыл бұрын
Very helpful, thank you. I was wondering what held the hose in there.. I did not think to un-screw it, instead I thought it might be glued and I would have to buy the hose with the couplings for our Shark Rocket. But I could not locate anything like that on line. Hopefully I'll be able to put Humpty Dumpty all back together. The Rocket model has to come all apart to get to it's broken hose.
@ClintMoar
@ClintMoar 5 жыл бұрын
I don't know about the Rocket. I don't believe the hose was glued. Because the hose was more "rubbery" than Plastic it seemed to grip the threads better. Again, not sure about a Rocket. Good luck and thanks James.
@noahmcfadden1658
@noahmcfadden1658 8 жыл бұрын
Thanks for this tutorial. Never knew those hoses just screwed in. My VAC is fixed.
@ClintMoar
@ClintMoar 8 жыл бұрын
Most welcome Noah McFadden.
@andytaylor1588
@andytaylor1588 7 жыл бұрын
Great solution for those vacuums that are out of warranty.
@ClintMoar
@ClintMoar 7 жыл бұрын
True Andy. I rarely think about warranty.
@ClintMoar
@ClintMoar 7 жыл бұрын
hmmm...interesting, though, I believe the rubber just wears out with time and all the air flow dries it out. I have never really thought about what would be covered under warranty, I knew it was old and I just fixed it. Thanks for the comment Mark.
@crandall777
@crandall777 4 жыл бұрын
Thanks Clint
@ClintMoar
@ClintMoar 4 жыл бұрын
Very welcome. Hope it saves you a couple bucks!
@andrewscott1253
@andrewscott1253 4 жыл бұрын
A link to where I can buy this hose would be good, I have a shark NV44 any I can't find the whole assembly so I would just like to change the hose.
@ClintMoar
@ClintMoar 4 жыл бұрын
Sorry Scott, I don't have that. I just took it to my local vacuum repair company and they had some.
@andrewscott1253
@andrewscott1253 4 жыл бұрын
@@ClintMoar Thanks for the quick response. I could not find one online, I ended up buying a different part knowing I might be able to swap the hoses over.
@IamKittySweets
@IamKittySweets 6 жыл бұрын
my vac hose is yanked out of the handle, I can see a copper wire stuck inside the handle .. of my navigator nv 355 ..( Im told they call this hose an electro magnetic hose) your video shows me how that wire should be attached . :)) the hose is shredded on the other end also.
@ClintMoar
@ClintMoar 6 жыл бұрын
thanks for the comment Kitty. I'm not sure that I understand though? Can you make your point in another way?
@IamKittySweets
@IamKittySweets 6 жыл бұрын
edited !! thanks !!! 🔨 🔧
@nataliyagolub9050
@nataliyagolub9050 9 жыл бұрын
how do you fix the other side of the hose? where it is attached to the bottom? if that part cracked where it is attached to the suction.
@johnh320
@johnh320 8 жыл бұрын
+Nataliya Golub i don't think you can on the NV42! i am going to call my local vacuum repair shop tomorrow. as far as i can see, the upper end is part of the bracket. right now i am using duct tape
@ClintMoar
@ClintMoar 8 жыл бұрын
+Nataliya Golub If you mean the part that I show at 1:02, both parts are threaded and screw in. To remove, you'll have to cut with snips and remove with pliers. It will probably be glued in so you won't be able to unscrew.The old will be destroyed so make sure you have a new one!
@chriszenier826
@chriszenier826 3 жыл бұрын
Thank you!
@ClintMoar
@ClintMoar 3 жыл бұрын
Your welcome Chris. Hope it helped.
@chriszenier826
@chriszenier826 3 жыл бұрын
@@ClintMoar it definitely helped! That end piece is what was driving me nuts.
@robinlugosi3961
@robinlugosi3961 2 жыл бұрын
Thankyou !
@ClintMoar
@ClintMoar 2 жыл бұрын
You're welcome Robin. Did it work for you?
@momzilla9491
@momzilla9491 3 жыл бұрын
Hi Clint, I just bought a Shark NV 830 *Duo Clean brushes and love the machine but HATE how short the hose is. Do you think there is any chance of using your method to splice two hoses together? I do realize that by making the hose longer I might loose some suction, but having the dirt cup falling over on me while dusting when trying to reach more than 3 feet away is madding. Thanks!
@ClintMoar
@ClintMoar 3 жыл бұрын
Hey. I did a bit of research and it is difficult to say how easy it would be to replace. I wouldn't recommend trying to splice though. You could possibly try to change the hose yourself though you'll have to be comfortable with either jerry rigging of things don't go perfect or possibly having to take it to a vacuum cleaning repair company to finish if you can't complete it properly. I guess it depends on your comfort level and if the annoyance outweighs the possible repair costs. Good luck. Let me know what you decide to do!
@pyt7778
@pyt7778 5 жыл бұрын
Hi Clint, I can't find any answers to my Shark issue! I bought a cordless duo last year but as I'm in Ireland they say I'm not covered under the 5 year warranty. I have checked every thing, bought a new floor nozzle, then a new motir/handheld, then new filters....the machine at first stopped picking up and switches off after 4 mins due to overheating, then the floor nozzle arrived, picking up but now the dirt/dust bypasses the bin completely and clogs up the nozzle and tubing causing it to still switch off. . I have done all the trouble shooting I can think off, plus it costs a fortune to keep calling them from here. Please can you help.....at the end of my tether with it!!
@ClintMoar
@ClintMoar 5 жыл бұрын
Gee Connie, I'm not sure. The only thing that comes to mind is the Shark has some kind of safety feature to turn off if the filters are wet/damp. When I clean them, I have to give them a long time to dry before using. Hope you solve it.
@pyt7778
@pyt7778 5 жыл бұрын
@@ClintMoar Hi thanks for your reply. With the new floor nozzle it seems to be picking up better, I have new filters in the machine. But now, the dust/dirt is completely bypassing the dust container and going straight into the noozzle and tube, so it still switches off after a few minutes because it's getting clogged up. Any ideas why this is happening? Thank you in advance!
@ClintMoar
@ClintMoar 5 жыл бұрын
@@pyt7778 I don't know. Maybe you could upload a full video of what's happening and we can all see what you mean?
@pyt7778
@pyt7778 5 жыл бұрын
@@ClintMoar Sure, it'd 'be great to get some feedback on it. As I say, now it is picking up, but the dirt is not going into the canister, Just blocking the handheld nozzle and sometimes the long tube(main body of the Duo clean). The canister stays practically free of any dust or dirt. And its costing a bomb to keep calling Shark UK from Ireland, and they won't call back. Getting fed up with it now, I love Shark when it's going well, but I never had any issues with a Dyson, so next purchase I might switch back....was hoping that wouldn't be for a few years yet though. Thank you again Clint.
@patriciaparis2911
@patriciaparis2911 6 жыл бұрын
I made a mess trying to fix mine as it was glued into the top so hard. I have ordered a new one $58. NZcurrency Lucky if u have no glue in the part. This is the second hose that has split. No guarantee on the hoses either.
@ClintMoar
@ClintMoar 6 жыл бұрын
I can imagine that some may get over glued. I did make sure I bought a very good quality hose for the replacement, not a cheap feeling plastic one. Good luck with your next one.
@OuzoLouGarage
@OuzoLouGarage 6 жыл бұрын
My shark hose split this week . Thanks
@ClintMoar
@ClintMoar 6 жыл бұрын
Your welcome Lou.
@jacksonvang3429
@jacksonvang3429 5 жыл бұрын
What is the release button called? I want to order one. Pls
@ClintMoar
@ClintMoar 5 жыл бұрын
Good question. I'm not sure. They probably have a phone number you could call and ask.
@ilyasalikhan
@ilyasalikhan 8 жыл бұрын
You mentioned that you are using a quater inch vaccum hose, did I hear that right? I have a Shark Professional Navigator Lift-Away Upright Vacuum, NV355. It looks like a 1-1/4'' hose will go with it.
@ClintMoar
@ClintMoar 8 жыл бұрын
+Fouzia Fatima I believe the 1/4" refers to the coiled wire size inside. I think this matters because the "threads" that screw into the plastic parts.
@Equinox2021
@Equinox2021 6 жыл бұрын
Fouzia Fatima I was wondering the same thing
@d.lawrencemiller5755
@d.lawrencemiller5755 5 жыл бұрын
How did you get the red button off???
@ClintMoar
@ClintMoar 5 жыл бұрын
I don't remember exactly David but I think that is the part I broke by accident. I super glued it and it has held on fine.
@d.lawrencemiller5755
@d.lawrencemiller5755 5 жыл бұрын
Darn. Alright, thanks anyway.
@ElChile2010
@ElChile2010 7 жыл бұрын
Does anybody know how to replace the power cord of a shark rocket vacuum model nv 480 26, any help would be really appreciate it,thank you ver much.
@ClintMoar
@ClintMoar 7 жыл бұрын
Hey +elchile2010 I haven't changed mine either but would love to see how to...anyone?
@ElChile2010
@ElChile2010 7 жыл бұрын
It would be great Clint!
@chrisblester37
@chrisblester37 5 жыл бұрын
Thanks should save me some dollars iv got 2 and I want another 10 years out of them the cord goes after a while I shortened it a few times then put a new one on
@ClintMoar
@ClintMoar 5 жыл бұрын
You bet Chris. Here's to a few more years.
@karin9087
@karin9087 6 жыл бұрын
I hqve the same problem for about 5 months and i ordered the hoze but the store hasnt have the hoze for 5monts... i will try this way thank you! Is this hoze (the new one) universal?
@ClintMoar
@ClintMoar 6 жыл бұрын
No, I don't believe they are universal. I took the old one with me to the vacuum repair shop to compare. Let me know how it turns out for you 😀
@ilyasalikhan
@ilyasalikhan 8 жыл бұрын
Does the new hose have wiring inside it to connect to the copper wire?
@ClintMoar
@ClintMoar 8 жыл бұрын
hmm. I can't remember exactly. I believe I reused the existing part that had the copper wire attached and just attached the new hose to it.
@dustinbrodie
@dustinbrodie 6 жыл бұрын
oh my God! thaaaank youuuu
@ClintMoar
@ClintMoar 6 жыл бұрын
HA. Your very welcome DB.
@karrimusicviolet4157
@karrimusicviolet4157 3 жыл бұрын
I could Not get that front part off to save my life. It's Not meant to come off & then you also have the static wire to contend with. The whole unit is like $40 on eBay. I bought a longer hose to replace my broken one with, it has the same click in part, I'm just guna see if I can find a generic handle with the same diameter.
@ClintMoar
@ClintMoar 3 жыл бұрын
Sorry to hear that Karri. Good luck and let us know how you make out please.
@Sunnysets
@Sunnysets 8 жыл бұрын
The hose on these vacuum's suck! They don't stretch enough either. Mine is shot and I think I am going to just look for another vacuume that doesn't tip all the time when I use this short hose which I do a lot. Thanks for the video tho.
@ClintMoar
@ClintMoar 3 жыл бұрын
That is true and frustrating.
@brentmac9803
@brentmac9803 7 жыл бұрын
Where did you get this hose from?
@ClintMoar
@ClintMoar 7 жыл бұрын
hey +brentmac I just picked one up from my local vacuum repair company. I took the old one with me and they matched it up with a used one in great shape.
@patriciaparis2911
@patriciaparis2911 6 жыл бұрын
I got mine through Amazon. It is made in China and I think so is the vacumn cleaner.
@jerry55621
@jerry55621 8 жыл бұрын
Call sharks customer support you have a 5 year warranty on that vacuum. They will send you a new hose with no questions asked. Don't take it have them send you a new hose! Trust me they will send you a new one! They have great customer service.
@ClintMoar
@ClintMoar 8 жыл бұрын
Mine was so old, never even thought of that...thanks +jerry55621.
@freeasabird5187
@freeasabird5187 6 жыл бұрын
Where would you find their customer service number?
@alliegator187
@alliegator187 Жыл бұрын
Yeah that stupid handle. Pinching my hands. I can't remove that grey ring.
@ClintMoar
@ClintMoar Жыл бұрын
I know right?. Hope the video helped a bit.
@alliegator187
@alliegator187 Жыл бұрын
@ClintMoar turns out my model was slightly different because the inside of our hose handles were different. Long story short and sore hands later, I just order the whole handle and hose on Amazon for under $30. 😄 Apparently Shark doesn't want us replacing the hoses.
@susanhenry6834
@susanhenry6834 4 жыл бұрын
Yeah, don't buy! Hoses split after 10 uses. Shark isn't what it used to be!
@ClintMoar
@ClintMoar 4 жыл бұрын
Hmm. Was it the same model? Our 1st one lasted many years and our 2nd one is exactly the same quality and we're into year 2 with no problems.
@susanhenry6834
@susanhenry6834 4 жыл бұрын
@@ClintMoar I would have to go look at it but I believe so. I have had to duct tape mine for a few years. I bought it 5 years ago. I do however want to thank you because I did fix it with your help. Felt good to do it all by myself...with a bit of help from you! :) it sucks again like it did when brand new. I was about to throw it out. Took longer to unduct tape it than fix it.
@susanhenry6834
@susanhenry6834 4 жыл бұрын
@@ClintMoar just looked and yes, shark navagator.
@ClintMoar
@ClintMoar 4 жыл бұрын
@@susanhenry6834 your welcome. Thanks for sharing.
Why Can't You Repair Your Shark Vacuum?
8:27
Vacuums R Us
Рет қаралды 414 М.
So Cute 🥰 who is better?
00:15
dednahype
Рет қаралды 19 МЛН
黑天使只对C罗有感觉#short #angel #clown
00:39
Super Beauty team
Рет қаралды 35 МЛН
Wall Rebound Challenge 🙈😱
00:34
Celine Dept
Рет қаралды 20 МЛН
Quick Repair a Vacuum Hose NO TAPE
2:39
Hank's Garage
Рет қаралды 811 М.
Ridiculous Shark NV356 Hose Repair
16:19
VacLab
Рет қаралды 13 М.
Shark Vacuum Problems / Common Issues Fixes and Tips
6:07
Gearmo Auto
Рет қаралды 360 М.
Shark Vacuum Hose Repair - Part 3 of 3
22:32
Paul Romsky
Рет қаралды 55 М.
Shark upright vacuum repair - Easy DIY hose replacement
7:55
House Doctor Ray
Рет қаралды 326 М.
Shark Hose repair
5:21
Mp Vacuum
Рет қаралды 71 М.
Shark Rocket Vacuum Cleaner Lower Hose Replacement
11:05
Let Us Fix Something
Рет қаралды 167 М.
So Cute 🥰 who is better?
00:15
dednahype
Рет қаралды 19 МЛН