Sheet Metal Tutorial | Engine cover design in Creo Parametric

Lets design sheet metal part in Creo Parametric
The basic sheet metal design
• Sheet metal tutorials ...
Unbend Sheet metal
• Sheet metal Unbend in ...
Mapkes in Creo Parametric
• Create mapkeys, Nested...

[@kirankhairnar8678]

I get a lot of inspiration from your videos Create a video like this

[@siemenscadsolutions9994]

Excellent video #siemenscadsolutions

[@EETLASIUENGINEERINGSERVICE18]

Aapki wjh s m design engineer ban pai. Pahle degree thi sirf.

[@SuperJJ37]

Great job!

[@ganeshn.6847]

great one sir...

[@anitahase7621]

Hello sir please share link for punch and notch command in surfacing

[@user-jk9fb8py9k]

good job! love your videoes!

[@omegaalpha5735]

Mera bend back command fail ho rha hai… kya karu

[@chetanadsul2394]

Why did you took 30 degree taper angle while it is given as 120 degree

[@CADxTraining]

It's 30 degree one side and 120 degree other side. You can go with any angle depending upon your side.

[@chetanadsul2394]

@@CADxTraining ok

[@prakashsutar2846]

though i had followed each step exactly shown in video whenever i am trying to unbent it shows me error as "Highlighted swept flange walls cannot be unbent. Recommended actions: Redefine flange wall section or trajectory." can you please guide.

[@CADxTraining]

Try to reduce the flange height and check

[@amritkaur2949]

same issue

[@CADxTraining]

Try to modify the dimension of the flange

[@kbnchannel1991]

Useful one

[@BerkMirnak]

I'm using Creo 5.0 and Creo can't unbend the design. Is there a problem with me? or maybe the version? By the way it's really inspirational video. Thanks for that.

[@BerkMirnak]

Sorry, problem is on me. The measures are inch not mm, i figure it later.

[@mohammedmusthafa90]

Hi sir, great explanation. can you share the those drawing pdf for practicing ?

[@CADxTraining]

You can take a snapshot in hd resolution from the video.

[@kirankhairnar8678]

Make a video copy Geometry and Public Geometry plz

[@normanny7760]

AFTER DIVIDING I CANNOT MAKE THAT AS START POINT WHEN I CLICK ON RIGHT CLICK THE COMMAND WINDOW IS NOT APPEARING

[@adityakshirsagar6059]

need to long press of right click

[@normanny7760]

​​@@adityakshirsagar6059good luck for your future

[@normanny7760]

there is unbending problem what to do?

[@CADxTraining]

Try to increase the accuracy. Go to "File-prepare-model properties-accuracy" and increase the accuracy. Change the value to 0.0001 that's it.

[@normanny7760]

@@CADxTraining THANKS IT WORKED

[@vineethteja322]

unbent is not happening, it is showing error. after modifying the flange dimensions also i am getting the same error.

[@CADxTraining]

Increase the part accuracy

[@vineethteja322]

@@CADxTraining I made it 4 times Bro, but still I'll work on it.

[@CADxTraining]

Change the part accuracy

[@mechlown]

Hello, I am following this tutorial but the "Unbend" function fails in the regeneration... Any hints for that??

[@CADxTraining]

Try to increase the part accuracy.

[@mechlown]

@@CADxTraining the only difference I see is that, when I make the flange, i have to select one by one all the edges, while I saw that you do all in one time. Can be this the cause of failed regeneration? just in case, can u explain how do you select all edges in one time? thanks

[@DigiSculptStudio]

@@mechlown right click the edge and then left click

[@satishsingh-sy6nn]

Dear sir in Creo 3.0 this section in not unbend plz give the solution

[@CADxTraining]

Move the flange outside the edge.

[@satishsingh-sy6nn]

@@CADxTraining still not unbend in this also it shows error Highlighted swept flange walls cannot be unbent. Recommended actions: Redefine flange wall section or trajectory.

[@CADxTraining]

Try to increase the accuracy. Go to "File-prepare-model properties-accuracy" and increase the accuracy. Change the value to 0.0001 that's it.

[@satishsingh-sy6nn]

@@CADxTraining itS done thanks

[@CADxTraining]

Good to hear.

[@sandipsamanta7075]

Unbend is not working at 8.33

[@CADxTraining]

Increase the file accuracy. It will work. kzbin.info/www/bejne/nmnGd6OXa5yhfKs

[@sandipsamanta7075]

@@CADxTraining Thank you so much. Its worked. I tried multiple times but I failed. Thanks for this support & your video is very informative.

[@ganeshkurade4968]

Sir drawing is not visible

[@CADxTraining]

Play the video at 1080p

[@besko269]

Why i cant use bend back?

[@CADxTraining]

If you are getting any error then try to increase the file accuracy.

[@besko269]

"Feature failed to regenerate" always show me this

[@besko269]

Highlighted surface cannot be bent back. Highlighted swept flange walls cannot be bent back. This two messages also

[@CADxTraining]

Increase the file accuracy and try

[@besko269]

I tried that too, but everything is the same again