Sheet metal tutorial | Gusset design & punch form in Creo Parametric

Sheet metal gussets are provided to avoid unbending the Sheet metal part under load conditions.
In this video, we will learn how to design a gusset in Creo parametric. Here, we will design gussets in different conditions, so let's design sheet metal gussets in Creo Parametric.
Join this channel to get access to perks:
/ @cadxtraining
Basic sheet metal tutorial for beginners in Creo Parametric
• Sheet metal tutorial |...
Playlist:
• Part Design in Creo Pa...
• Complex part design in...
• Sheet metal tutorials ...
• Surfacing in Creo Para...
• Plastic Design in Creo...
• Assembly Design in Cre...
• Detailing the drawing ...
• Gear design in Creo Pa...
@CADxTraining #CADxTraining #CADx
/ @cadxtraining
/ cadxtraining
t.me/CADxTraining

[@CADCLASS]

Real way of teaching Great explanation and good naration

[@akshayhanmantikar1875]

You just explain it really simple. Love the way you take us through. Please keep making more videos sir. Great fan :)

[@medication1372]

Sr ur teching is awesome....u tech step by step point on that...it helpful to clear our doughts

[@monty9164]

Very well explained.... We can easily understand appoch to get result and thing to remember while making it.

[@villageboy9424]

Blanking, piercing, forming, embossing......tools design .. with drawing

[@NARESHKUMAR-vj3lu]

Sir ur good explanation is learning very well

[@SuperJJ37]

You're the best!! Keep up the fantastic work!

[@CADxTraining]

Thanks

[@prashantbr9343]

Thanks for the video. Well explained. Please make more videos on creo.

[@yogeshgajre7057]

very good knowledge transfer. Appreciate your skill.

[@CADCLASS]

Keep on sharing your knowledge

[@sasimech-dz6sn]

@cadx.. How ill you place the 2d drawing on model tree area... How?

[@petchir9904]

Sir , I am using creo 5.0 , After using falnge command , shape ~Sketch option not available , previously I used it , is there any change we have to do sir , for editing sketch option

[@thesmohan]

Superb and helpful

[@yedunair5619]

Sir after changing punch direction feature failed to regenerate appearing on screen

[@apetebuildingcivilconstruc3188]

Is it mandatory for one to consider factoring in laser kerf while designing for laser cutting parts

[@adityakshirsagar6059]

how to add image as you did in bottom left corner

[@siddarthapamidi4602]

Thank you for uploading

[@shashikumarkalledevar8433]

Very helpful videos....

[@haroldojrpropo]

thank's a lot congratulations

[@parmananddewalkar5512]

In my creo don't show bend position/bend line option.

[@Prajwal_shivareddy]

Sir could you please share the link of previous video cause I'm a beginner in sheetmetal I have completed solid part

[@CADxTraining]

Which video are you talking about? Can you mention the time stamp from this video if you know?

[@CADxTraining]

The link is given in the comments section.

[@Prajwal_shivareddy]

@@CADxTraining sir the first video about sheet metal that you mentioned in the beginning

[@Prajwal_shivareddy]

@@CADxTraining sir one more question I'm using creo 8.O and is it different from the one which you are using?

[@CADxTraining]

Check the link in the comment section. I have used Creo parametric 6 for this video. Overall both versions are the same.

[@HemantRangdal]

3:40 how to get that Bend outside command?

[@CADxTraining]

Which version of creo are you using?

[@vaibhavanasane1072]

Show how you have created family table

[@villageboy9424]

Please make video for Full press tools design

[@kaushlendrapandey5404]

3:40 , how did u bring that toolbar to select outside flange

[@CADxTraining]

Look for the bend option tab or offset tab on your screen

[@gangaGSH]

Sir can you please upload a video regarding k-factor & BA.

[@nant4583]

could you please teach me how to create a punch with draft tool and also family table. thx 4 advance

[@CADxTraining]

For that you need to join the training class here

[@radhug4077]

Hello sir!... At 3:41 you are add a BEND OUTSIDE command. I'm using creo 5.0 how will i use that feature sir?

[@CADxTraining]

This option is there in Creo 5.0, you just need to search in the tabs.

[@radhug4077]

May you please explain which tabs sir... I cant see that option on my flange creating panel.. if it possible please say this thing in your next video

[@CADxTraining]

Inside the flange, you have offset tab.

[@radhug4077]

@@CADxTraining it's in like 1.add to part edge 2.Automatic 3.By value. I'm right sir?... Thank you...

[@yro83]

how you show planes with shortcuts?

[@CADxTraining]

Create a mapkey

[@RajKumar-cf9wp]

sir in creo 7.00 material removed option doesn't open in extrude how to open that option sir

[@CADxTraining]

Can you write down the video timing?

[@RajKumar-cf9wp]

@@CADxTraining sir you used extrude command and put a hole that timing sir

[@CADxTraining]

I got your question. Actually in creo parametric 7.0, you have extrude cut as a separate command. So you need to use extrude cut separately. you cannot use it within extrude.

[@RajKumar-cf9wp]

@@CADxTraining thats it sir thankyou so much

[@nguyenchithanh6167]

thanks ,

[@praveens1516]

Can you please arrange the videos According to a certain order ..where we can binge it

[@CADxTraining]

For that, Go through the playlist.

[@praveens1516]

@@CADxTraining playlist Is jumbled up..atleast u can edit the names with number at the end.. but yeah it's upto you.. you have done so much..thanks for that

[@dhatsinamoorthyanandhan]

In that flange command how to go bend outside?

[@glleeren7276]

same is the Q here too!!

[@sharekpathan797]

How do you define the height and length of the gusset?

[@sharekpathan797]

Wiil you pls explain it with new video?

[@CADxTraining]

It's as per the reference part placement

[@sharekpathan797]

@@CADxTraining thats why i need some guidance on that I can't able to create it as per given dimensions. So please make video on that or provide some guidance. If you will allow me to share some data or some content then i will provide you. If you have already then pls make video tutorial on that.

[@CADxTraining]

This will help you a lot. kzbin.info/www/bejne/oYa7lmCrhb9gZtE

[@sharekpathan797]

@@CADxTraining thank you sir May possibly will help me.

[@Donykadamapuzha]

thanks

[@CADxTraining]

You're welcome!

[@nishanthkalathil7173]

How to bend the flange outside sir ?

[@nishanthkalathil7173]

How to get that pop up menu

[@CADxTraining]

This is available in creo 6 and 7

[@nishanthkalathil7173]

@@CADxTraining so not possible in creo 5 sir ?

[@vvvipin1]

@@CADxTraining SIR HOW TO ENABLE IT IN CREO 7.0

[@thesmohan]

In creo 5 or less, you can do that by clicking on offset tab while creating flange and check the box to choose 'add to part edge'.

[@hariprasadmohan1259]

Please Send me the Sheat metal drawings

[@grgr1831]

Can we use this kzbin.info/www/bejne/bpmTYWmAZpKgbqM method for the replacement of Gusset punch

[@CADxTraining]

Yes you can use it. But you can do even better. Just watch quilt form from this link to understand it better. kzbin.info/www/bejne/oYa7lmCrhb9gZtE