Sheet Metal Tutorial | Kitchen Sink in Creo Parametric

Lets design sheet metal Kitchen Sink in Creo Parametric.
Insert flat pattern in the sheet metal drawing in Creo Parametric.
• Insert flat pattern in...
The basic sheet metal design
• Sheet metal tutorials ...

[@surajkale6499]

nice explaination.............................please make more videos

[@loboslobos14]

Excellent work. Thanks

[@kishorb18]

Thank you satyendra for valuable information.

[@shankargopal9865]

Thank you very much

[@akshaysarwade9543]

Dear sir please upload new more videos because of lockdown we have more practice about creo

[@vigneshv8625]

Thank you sir,

[@praveenkowju5641]

Sir if possible please continue drafting along with 3Dmodeling for every part. And start surfaces module also. plzzzz sir.......

[@CADxTraining]

Why do you need drafting in every part? Drafting has the same process for all the parts. If you have any thing, please let me know.

[@fawadkhan-yc6wg]

hello sir. Can you please show me how to open reference drawning in side tree bar. Like you use it in your tutorial videos

[@CADxTraining]

Not possible in Creo parametric. It is done by the video editor.

[@visakhagadi3024]

How are you turning ON/OFF datum planes without going to the Datum Display? Any shortcut key?

[@CADxTraining]

Using mapkeys. You will find a dedicated video for that in the channel.

[@LatifRana]

Please make family table its some time need for customer approval and Blank size as per Dimension for CNC Turret Punch machine cutting Please Explain make some Videos with family table Details with section View and isometric

[@pavanbr3959]

Bro please explain brief GD&T, about all symbol functions, when to be use and where to be apply. please in English or kannada

[@CADxTraining]

Have you seen this? kzbin.info/www/bejne/Y2TXf2qBq6mIoLM

[@ajaynegi7627]

Didn't understand the pattern of the 6 rectangular shape at top. When I am doing pattern by selecting the plane which you have selected the direction of the pattern is not correct. And kindly tell what are the units mm or meter

[@CADxTraining]

I have selected a edge for direction. Unit doesn't really matter. You can go with anyone. I generally use inches for my parts.

[@ajaynegi7627]

@@CADxTraining don't know my pattern didn't work so a copied the sketch 6 times

[@psatish7839]

Hello, I have question can we make a flat pattern in the end?

[@CADxTraining]

Yes you can make but the value of flat pattern will be wrong. This is a deep drawing process and getting correct value for flat pattern is difficult.

[@CADxTraining]

Please subscribe the channel.

[@shubhampanchole2517]

why not shown flatten view?

[@CADxTraining]

The flat pattern which you get here is not the correct one. Since this is done by Deep drawn process, flat pattern is considered after hit and trial method.

[@CADxTraining]

And please subscribe the channel.

[@vigneshv8625]

Thank you sir,

[@praveenkowju5641]

Sir if possible please continue drafting along with 3Dmodeling for every part. And start surfaces module also. plzzzz sir.......

[@CADxTraining]

Why do you need drafting in every part? Drafting has the same process for all the parts. If you have any thing, please let me know.