SHERCO Known Problems and How to Solve Them

[@Gartzza00]

You don’t need to take out carburetor for changing the jetting - just tilt carb first towards you and remove the top part of the carb with slide and cable attached to it. Then tilt carb to other way and reveal the bottom side - then you can open the drain bolt and have access to jets. 🤘

[@TwistedTriggerEnduro]

Great video! As a side note, I ride a ktm and love all other bikes too. Love what you ride, ride what you love. 💪

[@dylanmccallister1888]

I have ridden yamaha ktm kawasaki honda and soon a sherco Every make has engineers that know what they are doing and i have never had a bad bike. Every one was distinctly different and had pros and cons like he said compared to the rest. I will say from a reliability standpoint. Honda, even when compared to yamaha, definitely reigns supreme for reliability. I mean using straight dino oil for 500 hours on sketchy methed up craigslist bikes and it keeps going

[@georgigetov2334]

The old gasgas were with Adler clutch plates and they haven't problem with them .The problem was from the clutch basket and we drilled it for better oil circulation .

[@TheDirtbikeRider]

I also drilled, but didn’t notice it was much better

[@stefankollar8966]

Very good work ;) one of the best channels .. perfect ride and technique reviews!

[@shooter7a]

2021 300 SE Factory Edition Smart Carb Rekluse Manual Clutch = Perfect Hard Enduro bike....

[@TheDirtbikeRider]

that's true, but its extra 1500euros.

[@ninjarob87]

I have this set up on my se250, is your clutch loud? Maybe it’s just my bike but I feel like the shercos clutch is louder in general than other bikes I’ve owned or ridden

[@dirtwonthurt1949]

Can you post link for smart carb please

[@danhopkinson2811]

@@TheDirtbikeRider even then you'd still be 1500euros better off than if you bought the six day ktm.

[@gophop]

Not a KTM fanboy. But I just can't give up the PDS. I have several bikes, and don't mind getting a Sherco. But my primary will always have a PDS shock.

[@westcoastfrisco]

Why? Many top hard enduro in the world riders bikes have linkage

[@MichaelSmith-pg6gi]

They are pretty good indeed.

[@ton0752]

Hello, I have a Sherco mixing oil, I already changed the gasket kit. Do you know what it could be?

[@BrunoRafael-bv2qv]

Hi, I have a 2023 sherco and I have problems with the clutch discs. What is the change that needs to be made on the Surflex discs to apply to my motorcycle?

[@TheDirtbikeRider]

It is best for you to buy recluse clutch plates, honda crf fit sherco.

[@stillcantride7159]

Just changed my jets and needle yesterday, you can do it with the carb on the bike.

[@TheDirtbikeRider]

that's true, its changing the bike

[@arturw.4771]

Hi, what sprocket do You use on front and back? I have the same bike and want to change my gearing. Thank in advance

[@threeheavensmusic]

great video what elevation you riding at?

[@endurodkl9556]

good video how did you modify surflex disc to adler basket?

[@jovannino99]

Nice video and interesting hints. I'm going to buy a 300 SE mod. 2023 and I'm wondering if all issues mentioned have been fixed or not. Have you got fresh info about that. I'm a WR 250 F '20 owner and what I have done it was only suspension setting, oil change and fuel. I'm almost good to do extreme but I'm the only one that's still using a 4 stroke and I'm not anymore so young too... ;-))

[@WordsofLegends-US4]

apparantely they have been fixed

[@grimvile2943]

Thank you for the informative video that wasn't trying to sell me something.

[@sjevki6006]

Zar je moguce da sam tek sad naisao na ovaj yt kanal

[@benwatson8227]

Do you have a link for the coil replacement please I need one and can’t find one anywhere 🙏 great video great content

[@TheDirtbikeRider]

i have got it from my sherco dealer

[@andyc4358]

What ktm needle are you using?

[@yuancho]

Hi, nice video 👌🏻 what is the reference of ktm needle?

[@TheDirtbikeRider]

KTM N8RE (54831035300) , thanks

[@yangminlee5785]

@@TheDirtbikeRider does this needle also works at sea level for sherco se250?

[@davidrenfrew1442]

What modification did you do to the suspension?

[@TheDirtbikeRider]

i made it softer with new shims inside

[@danhopkinson2811]

@David Renfrew "the" modification haha. i was going to ask the same

[@chadrides914]

I would rather listen to your “broken” English than this man’s monotone voice.

[@chadrides914]

*edited to add I wasn’t meaning your English is bad. I actually enjoy listening to you speak it. It’s perfectly understandable and enjoyable.

[@SketchyXC]

I agree!

[@TheDirtbikeRider]

I'm afraid you don't understand my voice well.

[@SketchyXC]

@@TheDirtbikeRider i can understand you just fine 👍

[@chadrides914]

@@TheDirtbikeRider I understand you fine as well.

[@hardendurobosnia17]

🔥

[@pakoymotovlogs9382]

SKILSS LEVEL 999999999999999999

[@quantrunghoa3862]

Can I ask you something. Where can I buy surflex discs?

[@TheDirtbikeRider]

you can get it from sherco dealer

[@quantrunghoa3862]

@@TheDirtbikeRider Thank you

[@marianardelean2566]

250 or 300??

[@TheDirtbikeRider]

i had 250

[@donproper3632]

You would think the price you pay for these bikes they would be pretty perfect I've had good luck with KTMs but they all have been pre-tpi bikes also but they have been bulletproof for me my two cents

[@danhopkinson2811]

you pay over 3K MORE for the ktm 6 day to get the same extra's that come on the Sherco factory model

[@cryptovonpasha3650]

Your voice is amazing!

[@thisisme7587]

You're loving on a computer voice

[@cruch0]

Just bought a brand new 2023 SE300 MR Edition. Anxious to test this machine xD

[@vasiliszaxaropoulos8726]

Ωραίο βίντεο

[@throttlebuff]

Gotta remove csrb on ktm now also

[@Dudujose1]

Parabéns pelo trabalho! Good job Eu tenho uma sherco 2013 4T 300 Sou muito feliz com essa moto, apesar do tempo de uso, ela me leva onde todas as outras 2022 conseguem ir Beta, KTM, Husqvarna, etc.... Venha nos visitar e andar de moto em lugares incríveis aqui no Rio grande do Sul Brasil Até mais Dirtbiker

[@emis.2217]

i ride a ktm but its a pice of shiet

[@joshuavanzuydam5044]

What KTM have you got and what is the issue

[@danhopkinson2811]

@Emi S. same here 2019 250 tpi. always something to fix, particularly electrical/loom related. wheel bearings are crap. sensors fail. lots of them seized hours old due to bad mapping

[@protein2620]

I didn’t think sherco had problems

[@agee8322]

Your voice has gone american!!

[@accipiternisus649]

AI

[@user-ww3xy5hd9v]

Мда не очень радосно

[@claudioteixeira5917]

In the end Sherco is a shit bike, if I don’t have time or mechanic skills! I ride only in weekends and I won’t my husky ready to ride, TPi 4ever! 😉 with 800€ WP PRO suspension kit is the perfect bike!

[@chadrides914]

Perfect till that tpi system fails….bwahahahahahAhaha

[@Tibingi84]

Had 2 TPI s, 300 2020 and 2021. Both failed after 165 hours.

[@michaelschwab9563]

What a Delusional Statement. TPI SUUCCKKSSS!!!!

[@chadrides914]

@@Tibingi84 two yz250’s, both Keihin Pwk’s didn’t fail and I’m at 290hrs on one bike and over 300 on the other

[@westcoastfrisco]

TPI? 😂😂🤔