How To Get The Prefect RESIN WAVES Every Single Time (Tips and Tricks)

Here are my do's and don'ts when it comes to creating beautiful wave scape with epoxy resin.
learn.sherivegas.com.au/
Use the codeword: youtube for 45% off
learn.sherivegas.com.au/produ...
Use code word: youtube for 20% off
ETSY SHOP:
www.etsy.com/au/shop/Resinart...
INSTAGRAM:
sherivegas_artist
/ sherivegas_artist
FACEBOOK:
/ sherivegasart
AMAZON SUPPLY LIST:
www.amazon.com/shop/sherivegas
AUD
www.sherivegas.com.au/collect....
You can help support my channel by any of the following:
*Follow me on my other social medias
*Like my video
*Leave a comment
*Share on your social media
*Subscribe and Hit the bell for notifications

[@tripives1858]

If it helps others... I was having a hard time getting the lacing effect. What I finally figured out was that my heat gun's airflow was not fast enough. Thus, it would take me about 5 minutes to move that white resin across the rest of the surface, and with each passing second becoming deeper embedded in the other epoxy. After watching this video and seeing the difference in speed, I did pour, heated everything up with a blowtorch, and then hit it with a hairdryer on high... I was done in 10 seconds and had the results that had been previously eluding me.

[@dawnparker5243]

I have had that same problem!!!

[@Nikki4201000]

Thank you for sharing this! I've done other projects but I haven't tried this technique yet. I've just been watching videos to get some tips before I start lol

[@cynthiaostrowski5133]

Does the resin used, could make a difference?

[@rachelleehrman3703]

I did too! I was leaving colors off because I was so disappointed with the results

[@tiffariff]

Wait so a good high blast hair dryer after heating it with a blow torch is better than a heat gun?! CAUSE I DONT WANT TO BUY ONE

[@sticksstonesartistry]

Thank you so much for the tips! I’ve been watching a bunch of your videos and learning a lot! I appreciate it. Your work is beautiful ❤️!

[@getlindab]

This is an excellent video! Thank you so much. I've been wanting to learn how to mix the resin with paint (how much) and creating the waves. This is the BEST video I've seen and you explain it so well, especially your do's and dont's. Also I only watch on KZbin.

[@debbiefriesen3413]

This was done a year ago Sheri but so enormously educational for my wave making. I have two beach scenes I have done over and over not realizing that less is more. I kept going over the white wave again and again and not knowing why my waves didn’t look like everyone else’s…now I know…once is ENOUGH! Thank you so much for this video , you’re awesome❤️❤️❤️

[@SherellGodschild]

I had the same problem.

[@lesleyacton2388]

Hi Sheri. Thank you for the wonderful tutorial. You make it look so easy. I'm now following you on all your platforms so I don't miss out on seeing your beautiful work.

[@yareyla]

Best tutorial ever!!! Thank you very much! I just started the epoxy journey and this was so enlightening!

[@prachidixit5755]

Thank you so much.! This was really helpful. Other youtubers never tell these details and make things look so easy.

[@RugbyBunny1]

This is a wonderful video. You helped me so much just in this short video. Can't wait to watch more from your channel. 😊

[@laureensanchez6491]

Thank you so much for your diligent attention to details! I love how targeted and concise your teaching style is without wasting time on unnecessary babble, thank you!!!

[@sherivegasartist]

Thank you 😊

[@Nikki4201000]

I've made some coasters, necklaces, earrings, and jars but I haven't tried this yet! This was actually the first project I wanted to do when I first started working with resin lol I just never got around to it. I'm trying to watch as many tutorial videos as I can to do it right 😊 thank you for sharing!

[@dukeavearl]

Wow that looks so good, thanks for sharing, i liked the do's and dont's format

[@MAJ0ROCEL0T]

I had an idea to take a sand colored wood slab, make an ocean out of resin and embed sea shells into it as a wall decor and this is PERFECT for what I wanted. Great tutorial, can't wait to make it

[@katanajokatanajo9619]

Great idea! Can I simply place my shells on my finish board and epoxy over? I'm a newbie

[@Herosznx]

My girlfriend left me so if we ever get back together, she’ll be jealous that I have a really cool table

[@germcrazyshokoff3623]

Sorry, bro, but I heard her new boyfriend watched the same video and made the same table so she’s not coming back.

[@Orion_resin_decor]

​@@germcrazyshokoff3623ouch.

[@syntheal7146]

@@germcrazyshokoff3623😂😂

[@agirlofinkandstars5780]

@@germcrazyshokoff3623wait what

[@ScorpioIsland]

@@germcrazyshokoff3623😂😂😂😂😂

[@mattersofthehartbynat8815]

I only found you this morning and it’s great to find a fellow Brisbanite artist and especially one that is so willing to share their knowledge! In answer to your question, I don’t have instagram or tick-tock, so I only follow you on KZbin. ☺️

[@danjustthinking1188]

Best tutorial I have seen on this subject! I have subscribed and will continue to learn from you. Thanks so much for sharing your content!!!

[@elisetipton7346]

Really great advice!! Love this video, very helpful. Thank you!!

[@kathwilson1240]

Hi Sheri. Just found you on KZbin. Soooo glad I did. I have a wooden tray I’m busting to do an ocean wave resin pour on. Thank you for the tip about putting a clear section before adding the white & also about letting it dry before adding a second wave. Nice to have a fellow Aussie to learn from 🐨. I have subscribed to your KZbin channel and look forward to watching more of your amazing artwork. I’m also an artist but only paint on canvas at the moment

[@cynthiablack5440]

I've just started working with resin and came across your tutorials, so I am only following you on KZbin for now.

[@craftingcuties3249]

Awesome job thanks for sharing. Can’t wait to try this myself.

[@nicolejackson1079]

Thank you so much for this. I’ve gotten so impatient and screwed up way too much many times I want to give up. Gonna take these tips- thank you so much!

[@sarahlewis7669]

You have just got yourself a new sub! Fab vid, very informative and easy to understand. Some people just waffle on and expect that you know what they are talking about……. Well done with this project and I can’t wait to binge watch your channel 😊❤. Keep up the good work. 🎉

[@mariettlinger8965]

Thank you, this is so helpful! I’ve watched a lot of videos, but none were as clear as yours. I think I have the confidence to try a wave scene now. Thank you, thank you! I will follow you on Tik Tok and Insta as well.

[@thechriswhewell]

So many top tips. I feel like I might just have success with this now. Thanks.

[@trudabear]

This is an awesome video. Thank you. I will give this method a go.

[@coraleehepburn8608]

Thank you!! Best video on this yet!! 👏

[@worasafallon2719]

Love your tutorial! Very helpful. Thank you!!

[@cynthiagraham6795]

Oh my gosh~!! you are amazing! I am looking for something new - and I LOVE this! Thank you!

[@brendagould13]

You are absolutely amazing at teaching and so much talent. Thank you

[@andreeatudor7088]

Hi Shery. I wanted to say that your tutorial tips & tricks videos are so great, especially for someone that is interested in just starting out. Please keep making them as they are so helpfull for beginners. Take care ! Andreea

[@sherivegasartist]

Thank you 😊

[@louisedistefano5138]

I just found you n I am hooked. Your a great teacher n will continue n will find you on other other platforms you mentioned. Thank you

[@allisonkrumm7918]

I now follow you on all social media platforms! I really love your tutorials. I have been wanting to get into this for a long time but have been too scared to try. Im not new to resin but new to beach themes

[@Goddessofthegarden13]

Just subscribed so only on KZbin for now. I'm starting my resin business and wanted to try a new project with a water look effect and your video was the first one, very informative and simple to follow.

[@adelescimone1671]

Great video. First time I’ve seen you and now subscribed. Thank you.

[@snkdesignsbykelleyvanscyoc2039]

I enjoy watching you all the time! The way you make it look so easy. As for your pole, I wasn’t on your Facebook and Instagram but I am since this video! Thank you so much for all you do

[@sherivegasartist]

Oh thank you!

[@EllisDesignandTradeCo]

Probably one of the best videos I've seen on resin waves.

[@Itsjesstoyou]

Gorgeous! Thanks for sharing💐

[@pas1172]

Hi Sheri! I watch you on TikTok and KZbin but NOT instagram. Thank you for the video. I'm going to try the resin seascape next week!

[@SherellGodschild]

I wish I had seen this before I did my first wave. This really helps. Thanks.

[@mareeback5594]

Thank you so much, I’ve always wondered why I lose my cells & lacing, this answers that question perfectly. I only follow you on KZbin

[@sherivegasartist]

Happy to help

[@angelortega7708]

Thank you for sharing! Is is my first time see one of your videos. I only have KZbin. I will be back to watch more of your videos. Thanks again!!

[@matthiaslojewski8190]

Solid tips. Thanks Sheri

[@thesarahjewel]

omg! just found you on tiktok yesterday, the algorithm loves you right now!! lol, great video and so helpful. thank you!!

[@cheryljean7412]

Just subscribed! Thank you for the tips! Very helpful 😊

[@tikineeks]

This tutorial was SO good thank you girly!

[@jeanwilcox3464]

Thank you. Great timing!

[@maryacosta3764]

Just learning. Thank you for sharing

[@tommyeatough8855]

very good love the video i need to have a go at this thanks

[@nicolerobinson4824]

Thank you I’ve been having trouble with this

[@lalasapatnala4568]

Thank u so much sheri vegas ur tips and tricks really helpful for me thank u..this is very perfect for what i want...good explanation

[@agermangineer]

Holy moly…. THAT IS AWESOME!!!! Thank you so much!!

[@lesliedavis2497]

Great video. I’m brand new to this and just started following you.

[@tammym5715]

This was very helpful. Thank you.

[@ranjinichoudhury8855]

First time came across a realistic video on how it is done

[@itspaintingitspouring.7676]

Love this tutorial thank you!

[@clairehug7583]

Great video 👏😍 thank you so much

[@ChrisThon]

Great video! Will certainly try your tips!

[@deepagiri7031]

Thankyou for this video for learning ❤️ awesome

[@Burdenofproof007]

Thanks for the tips. I might try it today. I have been doing rougher seas with angrier waves using a product called sno-tex. Gives me the ability to do rolling, crashing and splashing waves

[@stephching1556]

Hey Kev, I just read that you are using sno-tex I would really appreciate if you can tell me where to buy and what brand is it so I can buy and try it too. Thank you very much.

[@kassemmtairek3904]

Tres joli ! Merci pour les explications

[@prachijakra9333]

Thanks Sheri..it worked ❤️

[@candiswade3601]

Your recommended list of of best products

[@beautytrendz101]

Thank you for this!

[@sutela2060]

Thanks for your help and good video❤🙏

[@sanjayvichare2104]

Thankyou for your valuable Resin tips

[@dhyanamackenzie]

Thank you so much very helpful!

[@valeriedespyrenees4463]

Je viens juste de découvrir ta chaîne. Merci pour tous ces conseils très utiles 😀👍👍 Tu as gagné une abonnée 😉

[@harleycoder]

Thank you for this. I have been playing with waves for a couple of weeks now and you clarified a lot of things for me. I am using Amazing resin and it is amazing....makes nice cells and lacing for me. Thanks again! I'm a KZbin only person.

[@lauralynn9597]

which resin do you use?

[@harleycoder]

@@lauralynn9597 I use Alumite's Amazing Epoxy. I've used it for a few months and I buy it by the gallon

[@missbubu1611]

It was amazing!

[@lastdon6585]

Very helpful, and love your accent!!

[@El_B]

Thank you so much!! This is super helpful! are you still answering questions on this video? I’m a beginner and my kit came with mica powder for adding color. Does that work for the white or should I get something else to color it? Thanks so much!!!

[@MrRenoman2011]

Thanks Sheri about to start with resin

[@pauljenkins8359]

Brilliant tutorial thank you

[@sarahgreen8409]

Love the video, makes a lot of sense and KZbin is as close as I get to social media lol

[@karlat7880]

I know I’m late to the party but I’m a KZbin only subscriber only. I find hitting lightly with the torch again after blowing the waves can make the cells larger and more distinct.

[@kellystoner7001]

Only on you tube thanks for this tutorial 🤞it helps me with my waves

[@sherivegasartist]

I think sometimes knowing what not to do helps just as much as knowing what to do

[@rachelfleming2716]

Awesome video thank you! Do you have your heat gun on the low or high speed setting when blowing over the white?

[@lauriereid4497]

Just here and new. So far I love ❤️

[@davetv4705]

Thanks for these insightful tips. I am your new subscriber from Nigeria.

[@gigisantos8830]

Hi Sheri. Nice tutorials, thank you. I only watch on KZbin.

[@lolalove3972]

Great tips thanks 🙏🏼

[@chrismano4321]

Gostei, muito legal! Consegui aprender detalhes importantes!

[@conniehuffaCRE8]

Just KZbin and IG. Love this video!

[@overthalineproductions270]

AWWWWESOME!!! I don’t follow on IG YET, but about to look for & follow!!!

[@debrabanton929]

Finally I can see the different thank you for sharing , I only go on KZbin

[@nancykowalkowal3078]

Good information, thank you

[@pallavipandey7119]

Thnqq so much Sheri ma'am

[@LovewhatidoStudio]

Thank you so much... I will follow you!!!

[@smtracy3115]

Great tips! I tried pouring my first waves last night and the white was clumping, and i couldnt bloody figure out why. Thanks to you, im now off to pick up a bit of better resin and to try again :)

[@MechelleLeeBrooks]

Definitely don’t skip on decent resin. Learned that the hard and the expensive way 😮

[@davidmoneta6064]

I only watch on KZbin, thanks for the great video.

[@peterbrown159]

Hi,thanks for the tutorial. I'm wondering, do you let your white thicken more than the resin that you are blowing it over ?As in,mixing it first?

[@billrobinson8939]

New sub. Here only. Too old for the other venues. Thanks for the tips. Still hesitant about my first try.

[@tjnorred]

Thank you! 🙌

[@KarenBarrow]

Thanks for this, I am new to the idea of resin and I want to do some tables and countertops. Thanks especially for the comparison of resins. I am in the Dominican Republic and I know I won’t have a big selection when I go to buy it, I will be stuck with whatever is available. One thing I see from the video, the cheaper resin seems to look more like a breaking wave in deeper water rather than a wave washing up over the sand. So it’s not bad, and it may be what I’ll be stuck with, lol.

[@paulspencer4961]

Hi Sheri, love those ocean waves. Which additives are best to use in resin. Pigment Paste?,....mica powder?,...or,..?

[@marafuser1883]

Thank you for sharing

[@mamieloganjustme]

Great video with lots of good tips,thank you for that…I only follow artists on KZbin

[@DOTTYTIME]

Hello Sherri what brand of heat gun do you use. Also at what temp do you use it ? Like a medium heat or full, and what is you preference with the heat gun ends

[@eBiCrafter]

Beautiful ❤️

[@belindagreenhalgh5999]

Great tips

[@robinbruce2007]

Hi Sheri, with the white titanium/epoxy, do I need to add anything such as lacing drops /silicone ?