Maserati's most expensive problem fixed (cheaply)!

[@ShiftMotoring]

0:00 Introduction 1:23 How do you tell if your control arms need to be done? 3:24 So what's next? 4:58 Existing catastrophic failures 6:53 Assembling the arms 15:41 Beginning the installation 17:48 What the job entails 20:15 Removing the lower arm 24:45 How to adjust the toe 27:23 Installing the lower arm 34:11 Pineapple! 36:37 Upper control arm

[@Chris-mc99]

I have bought a set of these control arms and i can say the the quality is A1. Very simple job i changed mine on the ground with a couple of trolley jacks.

[@matr456]

Any feedback ~12m down the track? Thx

[@standupgenius]

These arms look beautiful man! Another cracking video!

[@jpw5029]

Great idea and very impressive. Actually sickening they can charge that much for garbage.

[@Eurosport.Automotive]

Great video! Are you able to post the torque specs for the upper and lower arms as well as the brakes? Thank you!

[@diaroneal6969]

do you have a website to order parts from? I did my control arms 2 years back so really and truly appreciate what you have done here and watched your FEA work - pretty slick impressed

[@ShiftMotoring]

I don't have anything set up properly currently. Most people reach out to me through the MaseratiLife Forums.

[@aretelmasian2482]

+1 for Avo at NMW. Awesome dude and really helpful. Knows his stuff

[@theadventuresofred19]

Excellent work. Shocking that Maserati are so negligent about vehicle safety and longevity.

[@jackierabbit450]

Do you make a set of these for the gran turismo?

[@mtomiuk8133]

Hi, great video as usual! What is the cost of these replacement upper and lower control with bolts? Do you produce replacement tie rods as well? Thanks, Marc

[@ShiftMotoring]

Send me a message on the maseratilife forums. I make them to order so the pricing will change for each order depending on the materials cost.

[@mtomiuk8133]

Got you! Thanks, Marc@@ShiftMotoring

[@thestamper]

You still doing these? I need a set!​@ShiftMotoring

[@mtomiuk8133]

@@thestamper I am a potential buyer, not a seller

[@naynrand9939]

Outstanding work Sir! When everything in this world is upside down, corrupt and just plain evil, its people like you that give us all a little hope! You are an Australian badass! Thank you Sir! Now for my question, just purchased a 2014 Grand Turismo Sport with 48k miles, love the car but as you mentioned some replacement parts are being discontinued. I will be confirming the control arms for my model are still available if not have you any resources or suggestions for a solution if I need to replace mine. The only thing I've noticed is a little pitch and yaw around corners compared to my 2011 M3 E92, but I've only driven the car about 100mi so far, I'll raise the vehicle and give it a shake as your video directs. Thank you in advance Mate! Vr Kc

[@BarrettBazz]

Hi Sir i think your brilliant ! ive got an issue with my rear bushes Maserati Granturismo 2008, Do you have the lower arms with new bushes? My rear is all over the place, dod tell me a price sir fanstasic video sir! Barrett

[@ShiftMotoring]

Check the video description for my website, head to the contact form and send me a message and I'll help you out!

[@GTP375]

Hey mate. From oz. How do I get in contact with you regarding some Of your work?

[@ShiftMotoring]

The easiest way to reach me is on the MaseratiLife forums.

[@longeneleonard1]

How can I purchase a full set of Rear upper and lower control arms

[@groovyboovy]

Really good thanks, now i am worrying about my suspension arms

[@ShiftMotoring]

Well, wiggle wiggle!

[@groovyboovy]

@@ShiftMotoring Had a 4 Wheel alighnment, all ok

[@LeeAbrahamson]

Do you make something similar for Gran Turismo?

[@longeneleonard1]

How can I purchase a full set of Rear

[@standupgenius]

By the way, where'd you get that hydraulic table? It's really nice!

[@ShiftMotoring]

Total Tools, they've got a few stores around Australia. Otherwise you'll find hydraulic tables pretty easily on google. They tend to be used in packing and warehouse environments where people are moving goods around regularly. If you're looking for proper mechanic's equipment look for something with hard stops for safety. Mine is just for packing gear and doesn't have stops so I need to be mindful when I'm using it like when using a hydraulic jack.

[@standupgenius]

Beautiful! Love your floor lift too!

[@jamesedwards5846]

Great job

[@AleArzMusic]

I'd like to buy a used '15 Ghibli with just 50.000 Km. What should I check?

[@TerrenceRollins-hf5km]

I got a 2016 Ghibli I would have someone check the evap system and the suspension they sit so low so it’s easy to crack hoses and the canister

[@AndyAllen-h2t]

Can I order these control arms from you? Do you have a price list with parts available. Thanks

[@ShiftMotoring]

Yeah you can, send me a message on the MaseratiLife forums.

[@Peter-xq9tz]

How do you know a full size spanner has a tendency to pop the dust boot off? Also, where did you get yours? Formula dynamics?

[@ShiftMotoring]

Lol, yeah popping that dust boot off is a nightmare. The grease makes it super hard to get back on! No, I make these myself. The manufacturing takes place in 4 countries and then I assemble the parts. If you want a set, or any details, the best bet is to hit up the Maseratilife forums and send me a message!

[@Coreypaice-in5ps]

I'm in Perth WA, Iooks like I need to replace my rear left side. Could you give ma an idea on the costing. Cheers

[@ShiftMotoring]

Drop me a line on the MaseratiLife forums!

[@accountname1651]

do you have a part list / bom of all needed call joints?

[@ShiftMotoring]

You can reach out to me on the MaseratiLife forums!

[@astonmartinzz]

Are you still offering your control arm setup on ML Forums as I see you directing others?

[@ShiftMotoring]

I am, I'm currently have a batch in production. Definitely drop me a message!

[@astonmartinzz]

@@ShiftMotoring ill try! just joined so I guess I need more time or whatever to message you! Awesome!

[@ShiftMotoring]

@@astonmartinzz just responded to the DIY videos thread and I'll send you a PM!

[@Tom--Ace]

Is there a solution for the front control arms?

[@ShiftMotoring]

Not yet, but I will be working on it soon. I've nearly paid off the costs of developing the rear ones then I'll start the front.

[@chalachin4452]

great work!

[@Tom--Ace]

Omg you have an x1c too!! Mate it's like we're twins hahah

[@bennylarussa8010]

Good Job

[@andyallen5221]

Is there contact details to enable me to order these kits

[@ShiftMotoring]

Hi mate, you can get these from me - reach out to me on the MaseratiLife forums!

[@buzzen812]

Do you need help making and distributing these in the USA?

[@ShiftMotoring]

I would love to have some support getting these through the US. Send me a message on the Maseratilife forums!

[@ROZPYATOMU-SLAVA]

*0670000000!ПРОДАЖ!10МЛН!*

[@accountname1651]

Bravo Maserati - why are these cars actually road legal?

[@longeneleonard1]

Can you share your email address?

[@ShiftMotoring]

Hi mate, I got your message on the forums and have sent you and email! Thanks for reaching out!

[@user-go4one]

05:49 CDT I own 2003 maserati cambiocorsa. How can I purchase 2 rear lower arms?

[@ShiftMotoring]

@@user-go4one I will have a website up and running in a few weeks but at the moment, the best thing to do is to reach out to me on the MaseratiLife forums and I can give you my contact details there!