Now THIS is bang for your buck! - Elegoo Neptune 4 Pro

Thanks to Elegoo for sponsoring this video and sending us the Neptune 4 Pro to take a look at in person. Check out Elegoo and their line up of 3D printing products using the link below and use the code MKT_ShortCircuit to get $10 off your order:
www.elegoo.com/pages/elegoo-n...
Does cheaper mean worse? Absolutely not the case with Elegoo's Neptune 4 Pro. It has everything you need to get started on your 3D printing journey and then some, all at a reasonable price point.
Purchases made through some store links may provide some compensation to Linus Media Group.
Want us to unbox something? Make a suggestion at lmg.gg/7s34e
► GET MERCH: lttstore.com
► LTX 2023 TICKETS AVAILABLE NOW: lmg.gg/ltx23
► GET EXCLUSIVE CONTENT ON FLOATPLANE: lmg.gg/lttfloatplane
► SPONSORS, AFFILIATES, AND PARTNERS: lmg.gg/partners
► PRODUCTS WE USE ON THE SHORTCIRCUIT SET: lmg.gg/scset
FOLLOW US ELSEWHERE
---------------------------------------------------
Twitter: / shrtcrctyt
Instagram: / shortcircuityt
TikTok: / linustech
Facebook: / shortcircuityt
CHAPTERS
---------------------------------------------------
0:00 Intro
0:27 Unboxing
5:10 Assembly
12:03 Filament
13:46 Automatic Cycle
16:30 Let's Get Printing
17:33 DONE!
19:34 Klipper
24:10 Print # 2
26:03 Outro

[@ZackMuffinMan]

LongCircuit

[@autofocusphotos]

We had the exact same idea for a comment lmao

[@sillyWillieBilly]

This one actually though was informative and covered everything. I didn't mind this one at all.

[@christophercannon769]

That's what she said

[@JackyAnimations]

Lol

[@Ripinda1911]

Shortn‘tCircuit

[@Metal_Maxine]

"I hope it's not [something] lined - that way you'd die of neurotoxin poisoning" - Dan, as ever the cheerful member of the LMG team. The first time I saw him, he recommended doing electrical repairs standing on a metal chair because "if you get it wrong, they can't make you do it again"

[@SUPER_ZOMBIE]

LMAO I remember this! I don't remember what video it was from though

[@bubbledoubletrouble]

PTFE, aka Teflon. When heated to very high temperatures the fumes can be toxic.

[@BAoxymoron]

Dan, the Lumalee of LMG

[@kingdraconias]

@@SUPER_ZOMBIE It was the one where he was helping Linus setup his new living room's VR setup. And what he said was something more like "If you mess up, you don't have to go into work tomorrow."

[@MowMdown]

@@bubbledoubletrouble FYI - If you, or anyone reading this, ever uses the "self-cleaning" mode on your oven, you need to open all the windows, remove any persons and pets until the cleaning is complete because it does burn the PTFE lining off.

[@user-dj2zy2wb8z]

Can Dan review a handful of printers and give us his suggestions at each price point?

[@evilgremlin]

Well if you want most incompetent reviews... And he admits complete incompetency by "my home printer runs at 30mm/s"

[@imapotato5927]

@@evilgremlin yeah and when he said the heat sink fan was for part cooling

[@blacknovella]

as a hardcore resin and fdm enthusiast. Dan knows his stuff I want dan doing more of these.. he knows what he is talking about.

[@MonkeyWithAKnife]

Or MandicReally, Modbot, CNCkitchen, 3DNero, 3DPrintingNerd or one of the many other channels focused on 3d printing.

[@blacknovella]

@@MonkeyWithAKnife i too am in many of their communities :)

[@sstalder5]

Can Dan just have his own LMG maker channel at this point? He's got so much knowledge to share and I feel like it'd be an instant gold play button to add to the collection.

[@shanematthews1985]

Linus Maker Tips, where we make just the tip

[@wobblysauce]

Dan needs to re master the Christmas music

[@Cobyc5150]

I can hear it now, " welcome back to the shop to another episode with maker Dan. Today we will be.....

[@BenCos2018]

Facts I'd watch his channel for sure

[@Kyle496]

​@@BenCos2018 I'll not be making anything but for whatever reason I'll probably watch everything he's showing off.

[@OrDuckVet]

I like to picture Dan reviewing random things in his home. “Well, this fork is a bit small, but I mean, well, it’s fine.” 😂

[@yohojones]

I could listen to Dan review anything. So calming. Great episode.

[@ssl3546]

I like how Dan has basically taken over Anthony's (RIP) function at LTT. Dan started as this unpleasant sarcastic guy but he's mellowed out at alot.

[@Internetianer]

@@ssl3546 rip? o.o

[@JWF111]

@@InternetianerAnthony is a lady now I think, so no more Anthony

[@verakoo6187]

Not a review

[@Internetianer]

@@JWF111 that doesn't really change who they are as a person though

[@my_alibi]

For $300 that is an outstanding value.

[@privacyvalued4134]

Yup. This is the first PLA 3D printer I've seen that actually makes sense and looks pretty solidly engineered. It's a shame it's just a PLA printer. I'd love to see a desktop metal sintering 3D printer at $300. Currently, metal sintering printers run about $12,000 on the cheap end and easily push $100,000.

[@Leesboringlife]

I just looked it up and was like WOW!!

[@hazonku]

@@privacyvalued4134 True. I remain hopeful laser sintering printers will find their way down to affordable prices one day like FDM & resin did. As stupid and wannable Apple as Formlabs are I will give them credit for making the first effort in making at least nylon sintering printers that are more in the small business/rich hobbyist price range.

[@edenassos]

@@privacyvalued4134 Choosing beggars.

[@sxmtaekwon-do7685]

metal sintered for $300? dude.... are you even serious. LOL @@privacyvalued4134

[@Shynd]

The tiny fan in the hotend is for cooling the heatsink, the two fans on the side are layer cooling fans.

[@tjCooper88]

Came here to say this. Why would you ever have two fans blowing at each other for the heatsink cooling 🤦🏻

[@sturdybutter]

Now this is a 25 minute shortcircuit I can actually get behind!

[@s4nari]

Thanks to Dan for hosting today's video.

[@vPeteWalker]

I love these videos where someone absoutely knows their shit with a particular product. I don't know jack shit about 3D printing, but I'm sold on this product based on Dan's assessment, and I understand why this is great. Very well done.

[@Brandon-jf9cv]

He actually knows very little. He called the heat sink fan the part cooling fan and he says his printer at home can only do 30 mm a second if you’d like to see 3d Print reviews there’s a lot better you can do not saying his is bad there’s just gaps in his knowledge.

[@mads6103]

​@@Brandon-jf9cvAgreed, could be way worse though

[@juts89]

It's a sponsored overview, absolutely do your own research

[@tonim.9460]

​@@monki_sudoafter two weeks? wtf you're lubing it with? water?

[@BeefIngot]

ugh. Don't be tricked my dude. He is absolutely not an expert by any means. Many many inaccuracies and misses. Not his fault, but don't take this as the be all end all source. Heck, don't even take the recommendation

[@GeneralRasp]

I love when Dan gets to review 3D printers. Always enjoyable and informative. I would love to see him do a general trouble shooting video for FDM printers.

[@ricknaam5658]

shortcircuit doesnt do reviews, this is an initial impression

[@sven2701]

Agreed. First time I've watched one of his videos, super informative. Subbed

[@koybuscho5880]

Mine just got here 4 days ago. It’s a fantastic printer. Done some complex prints like castles and stuff at full speed (250mm/s) and it KILLED IT. Amazing value!

[@BeefIngot]

You almost certainly did not. It's a common beginner mistake and I'm not the least bit judgey, but you should know at any usual layer height the hot end wouldn't be able to keep up, and the printer would never actually be able to hit top speed unless you cranked the accelerations so high that the print came out looking awful other than literal straight diagonal lines across the whole bed.

[@droniedj557]

But the Bambu lab X1 does a great job? It isn't that unbelieveable.@@BeefIngot

[@xvr6036]

The best part of WAN Show, and now, the best part of ShortCircuit 👌

[@peeonthe3rdrail414]

Pshht everyone knows the best way to do it is to buy an ender 3 for $250-$300 and put $400 worth of upgrades into it.

[@MrAlucardDante]

That’s exactly what I did 😂. Although I payed 120€ for my ender3, and only spent 250€ for upgrades (raspberry for klipper, 32bit mainboard, 3dtouch, linear rails, direct drive and dual z)

[@nicksterspad]

Great video! I love how it feels like the editors are allowed to try to express their personality with funny clips but their editing doesn't distract from the content.

[@philipwolper1339]

Just got this for 150€ on eBay as my first printer. Super hyped to start printing!!

[@hyun-shik7327]

I just got this for Christmas thanks to your recommendation. I made my first of many things.

[@blackeyespecialist88]

Bought this for my wife for Xmas. I was having second thoughts about this printer after I bought it,but your video made me feel much better. I was actually able to understand what you’re talking about. BRAVO man

[@ReaperUnreal]

I was fully expecting this to be $600+, seeing it at $300 makes me seriously consider it.

[@TheTonie4]

@@monki_sudo This isn't meant to be a real review in the first place, these are just overviews of the products essentially, especially with this people a sponsored one.

[@talharoxen]

@@tombeardy4833 Is that good?

[@Digitness]

@@talharoxenit’s like a cult. Bambu lab has almost gained a following like apple. Apparently they are good

[@99956563232]

Just bought one. Excited to see what it does.

[@Anyobservation]

Dan is one of the best, if not the best host at LMG. Always lots of humor and knowledge while casually being well spoken and easy to follow.

[@CanuckCreator]

`We run it in our creator warehouse for our little Vorons` How is this the first time ive heard of LTT running vorons? lol

[@takuya2431]

The best comes last i guess :hehe:

[@rux_ton]

This was my first short circuit video, never really wanted to venture here and boy was this a BANGER video, kinda swayed me towards this as a secondary printer. Ive been teetering between this and bambu labs p1p (look i want the companion cube ok)

[@dylanstorts4327]

I want Dan to get more Short Circuit content to the market. He is thorough and funny and I love it!!

[@DanielSalley3D]

FInally got my 4 pro. I was as concerned at home the head would move itself to death but the speed the bed moves really is amazing, it'll prevent the head unit burning out the rails ! Great printer, even compared to the Bambu its amazing for the money!

[@digiscream]

I've had my Neptune 4 (non-Pro) for about a week now, and this is probably the best video I've seen on it. That said, I've been printing at a real 250-300mm/s, and I haven't had any of the issues seen here - aside from a bit of ringing, my prints have all come out perfect. In practice, this is just as fast as the Bambu printers, and the only thing it lacks is proper input shaping; the accelerometer headers are present on the controller board and it's obviously present in the firmware, there just...isn't one. In a sub-$300 printer, that's not the worst thing in the world I guess.

[@Itsudemo1]

It may be close to as fast but it's still a v roller bedslinger. It'll wear down quickly when pushing 200mm/s Core XY is for fast printing

[@digiscream]

@@Itsudemo1 - when you can buy 2-4 of these for the price of a CoreXY, it's not really a problem...especially when you consider the closed ecosystem and crappy firmware limitations of most CoreXY printers on the market, compared with this one running Klipper.

[@Dramaican88]

It is very nice to see and quite obvious that Dan's knowledge around 3D printing has improved and grown a lot and in a relatively short time! Also really nice to hear that the engineers at LMG are using Vorons. This great as a "first printer with Klipper" option for newbies and I hope printers with stock Klipper that are this affordable reach "ender 3 status", especially since they seem to have a better out of the box user experience. It used to be that consumers would buy an ender 3 and then in the first 5 minutes they started ordering upgrades and printing modifications to make the printer actually print well. I am happy that those days are gone and now you buy a 300$ printer and you can actually have some nice prints without any need for modifications or fixing issues.

[@x9x9x9x9x9]

Toss in a CHT nozzle and that printer looks like it might be a winner. Its really nice to see cheap printers coming to market with klipper installed so we can print fast. There hadn't been any major advancements in FMD machine in the past 4 years aside from volcano style hotends. Like there have been a few smaller things but now with klipper, Volcano, and CHT nozzles we can actually print really fast. Eventually my sidewinder x1 will die and the neptune 4 pro might be my next printer

[@B_T_B]

I for one was happy when I got the Neptune 3 Max, then a week later releasing the Neptune 4 series! Hoping they dont release the 4 Max for a while! What I can see from that review of the 4.. Differences are the extra fans on the back of the extruder. Extra light on the extruder. 300°C temp upgrade on that nozzle. Yeah im happy and reckon I can upgrade this max with no problems. 😁

[@elone3997]

Nice review Dan..I have literally no experience of 3d printers so to me they look like pure voodoo..the speed that thing was moving was crazy!

[@spivzit8754]

Incredible first impression video you did great. Elegoo as a brand has included a lot of the same features and kit to their last couple of generations of Cartesian printer and that's why i tend to recommend them to new users. Other brands you have to upgrade to get the same features when elegoo just realized that this is what people like. The upgrades on this printer is wild with the speed and rails and I'm quite intrigued. Pla+ had been my go-to material for many years since it's the easiest to print with. It's consistent. It's tough and rigid and I can hold some very tight tolerances when prototyping and making fixtures for the shops I work in. 10/10 all machinists and engineers get in to 3d printing as an additional tool in your belt.

[@jameslewis2635]

Nice to see someone like Dan doing a review like this. He comes off as someone who knows his stuff, at least where it comes to 3D printers. It also makes a difference that he is throwing things on the floor rather than randomly dropping everything he touches.

[@Wink_FingerGun]

Waiting for mine to get here. So thankful you guys did a review. Thank you.

[@urhomarkkanen]

"I hope it's not PTFE lined, otherwise you will die of neurotoxin poisoning" Just a PSA for those who don't know, PTFE, commonly known as Teflon, starts to decompose at temperatures above 260°C, so unless you for certain that your hotend doesn't contain PTFE (for example full-metal hotends, most hotends do have PTFE in them) its not safe to print at temperatures above 260°C

[@treeoflifeenterprises]

i bought one of these as a first 3dprinter based on the review, and some yt vids showing that it wasn't impossible to do 3d cad. Apart from a slight challange with the initial manual levelling, it's been great; easy enough to setup, and use. the network acess is only while printing, which is worth mentioning. the money off discount is available directly. Its taken a little while playing around with settings to get precise holes and first layer for latest version of cura, but it seems to be quite capable. It can handle abs and nylon as well as the usual pla.

[@tranceonline]

Some things he says doesn't sound like he is that much educated in that topic. For example, he says "nice quiet stepper motors" but 90% of the noise of stepper motors comes from their drivers. Meaning, that a really loud printer can get really whisper quiet by just changing the stepper drivers. without touching the motors at all! My first printer was disgustingly loud. Just switching to a "silent-board" made it almost not hearable. Switching to a good 32 Bit board went from quiet to "is it running?" this is just one of multiple examples. I mean, for beginners, its ok. For ppl who are into that for some years... i'd rather watch other YT'ers regarding that topic. still: Love you guys from LTT ;)

[@mirkinzaathnar3167]

"that won't break your bank!" Sir, you have not seen my bank account

[@buckminst]

Not only did this video sell me on (and cause me to buy) the Neptune 4 Pro, but it introduced me to Klipper, and sent me down the rabbit hole of converting my Ender-3 Pro over to run Klipper off of a spare Raspberry Pi I have. Good job.

[@tswan137]

Wow. I’m actually sold. I’ve been waiting to bite the bullet on my first 3D Printer. This doesn’t look like a cheap little toy and I can learn a ton while having actual functional software and features.

[@arthurmint]

this is the best shortcircuit i have ever watch. great video dan :)

[@flammablewater1755]

1 hour after this video goes live and we've already hugged the Elegoo site nearly to death.

[@moki2093]

@@monki_sudo you've made 7 comments on this channel and 6 of them are for shitting on it.

[@tophatv2902]

@@monki_sudo dude i have seen you like 3 times on yt on diffrent videos. Go outside

[@clementfrance2905]

Ordered ! You sold me at "EVERY beginner should have this printer". I've been doing CAD for years and hesitated to take the next step and get myself a nice printer. Now it is done. Can't wait to toy with it, thanks for the review !

[@SmallDisturbedChild]

I'd love to see Dan do a review of your Voron setups and any mods you might have done, though that being said there is a lot do dive in to with vorons. I have a 350mm Voron 2.4r2 and love it.

[@cparks872]

I'm a fan of Elegoo, I've had their Neptune 2 for a couple years now. Great budget printers. Probably going to be upgrading to the 4 or 4 Pro here in a few months. Their customer service is top notch as well.

[@99prxp]

build a voron

[@tophatv2902]

@@99prxp dont do this just get a bambu for cheaper

[@cparks872]

@@99prxp Unfortunately I don't have the budget for that. Maybe some day. It does look like a fun project!

[@anmolsinghshekhawat4284]

you guys can make an ltt video for getting started with 3d printer for different budget and proficiency level. can also include a bit about 3d print farm business that people are building now a days. I myself want to start 3d printing but not sure which one to get.

[@BeefIngot]

You want to go to an actual 3d printing channel. You would not benefit from such a video. I promise you.

[@SirSicCrusader]

I have been keeping a eye out for a recommendation for a starter printer, and I may have just found it thanks Dan, you the man etc.

[@HartenDylan]

Dan getting excited about cool nerdy shit is dopamine-fuel for sure. More please.

[@technewb8241]

Ordering it. Thank you, Dan

[@beardedgaming3741]

can you please make a how-to for setup? ensuring things are square, that motors are stepping correctly, that beds are level, that hotends are flowing properly... from square 1

[@ZeyadAlmat]

Saw this early on Floatplane, watching it again on YT. Videos hosted by Dan are rewatchable af. Funny, informative, and soothing all at the same time.

[@antigravityinmotion]

great job Dan🎉 I really like your printer videos 👍 the video so packed full with interesting details, so I don't care its not "short" - it could 2h and would watch it completely🫶 I vote for more Dan videos❤

[@kissmychakram1]

I see Dan, I watch the video. I didn't know it was possible to be chaotic dead-pan before he came along. This printer looks very interesting and might just be the one to get me to open my heart and wallet to 3D printing. Thanks.

[@marcusansell9713]

Really enjoyed the full in depth video great informative content 👍

[@Konigstiger]

I've got a Neptune 3 downstairs chugging away right now, and this is looking like a hell of an upgrade.

[@VoidOperator]

I pre ordered this thing on day 1. I'll also be buying whatever printer someone makes that i can start prints from my phone while I'm at work. Bonus points for a Android version of Cura, and a slime block flying machine to push completed print off the bed so i can start the next one

[@RahulJC]

I pre ordered this.. already have the Neptune 3, absolutely love it. Looking forward to the 4pro.

[@AzuraTheRock]

We love Dan

[@Jef-F]

Dan can review a booger and I'd still watch it.

[@nata911]

I fuckin love this dudes roll through everything style

[@NavyDood21]

Man, if I wasnt living off of disability, I would love this printer. Used to have an Ender 5, but just didnt have the time to dedicate to it anymore. I was insanely surprised by the price, expected it to be at least twice that amount. I havent been even looking at printer prices for a few years, it amazes me how much they have fallen.

[@SiniSael]

yay Dan video!!! The best of LTT - Luke and Linus is cool and all but Dan is the man!

[@Brookler]

I'm moving in a few months to a bigger place, this is at the top of my shopping list

[@oienu]

That is the first 3D Printer on that style that looks like an actual product instead a DIY kit, very nice OwO

[@user-hd8gn1uj7e]

i love that dan dailies a tank

[@AndrewSpeer]

Dan's indifference @ 18:55 is why I love his hosting. Just completely unfazed by the utter chaos of it all.

[@mikekuschka998]

Glad Dan is getting away form the help at the Wan Show. Excellent job. Keep up the good work all. That includes you Terren.

[@user-zw3mg1so7o]

Love me some 3d printer reviews! Would be cool to see some reviews of resin printers!

[@flebnard]

Saturns look pretty neat with what can be done with resin

[@user-zw3mg1so7o]

@@flebnard I do have a Saturn 2 and its a great machine, can recomend! But I am looking to switch to anycubics latest one with autoleveling, since you still need to relevel the build plate from time to time on S2. The ball joint just isnt perfect

[@Fearox]

Crazy to see how far 3D printers have come.. I bought my first 3D printer 2017/18 for 500€ It had NO heated bed (I think it was a 120€ upgrade part) and no leveling assists.

[@DestroyedArkana]

I decided to pre-order this as my first 3D printer, thanks for the rundown! I hope it works well for me

[@Bh_1989]

If this were a Neptune 4 Plus I’d be buying it immediately. The build plate size is just a touch too small for my preferred needs right now

[@Wabaloo]

Dan has been the best addition to the on screen ltt team.

[@kstricl]

I JUST bought an Ender 3 V2 Neo in early June. This makes me jealous, but I don't regret my purchase - some of the joy in these units is modifying them. I changed it to direct drive less than a week after purchase using a model from Thingiverse, which I have since modified to add things I wanted. This Elegoo is now on my recommend list for those that want to start without being modification happy.

[@mysticwizard1943]

Elegoo makes great stuff. I've got the Neptune 2S and the Mars 2 Pro for resin and they're surprisingly good for their price. Probably gonna pick this one up when I've got some spare cash.

[@deegan727]

26:04 enough said.😂 I’m looking into getting a 3D printer for my son. This stuff is beyond me and I’ve been looking at printers for awhile watching many reviews and they all say why they like something and why they don’t and the next person always says the opposite😂 but from what I can tell based off of others this is a really decent printer in the 300.00 dollar range and won’t leave someone wishing they got something more capable. I might even get him the 4 instead of the pro. It seems like a beginner won’t miss the pro features.

[@xsehrmotiviert]

Looks like Linus isn't the only one who can drop stuff

[@Secret_Takodachi]

16:39 I thought Dan was a smart man... Now I know he's just as susceptible to doing stupid stuff as the rest of us 😂❤

[@MrAlucardDante]

Octoprint also has a Bed Mesh Visualizer plugin. But it’s nice that it’s integrated into fluidd

[@AnnaBellaBear]

Watching this video where Dan is describing all these cool, in-depth features and all I can think is, "how is this not like $600+" for all these features

[@BeefIngot]

because this is all old poorly implemented stuff on yet another ender clone. Times have evolved and the printer you can get for 600 are miles better in terms of speed and user experience.

[@tophatv2902]

@@BeefIngot no lol is anything remotely similar to ender is a clone now? lets be honest p1p isnt that far off for being twice as expensive and being closed source and possibly unsecure cloud servers unlike this klipper machine.

[@BeefIngot]

@@tophatv2902 Its similar in motion system. Rollers are awful. The P1P is more expensive yes, but I think it's worth it for not having to configure or tune

[@Digitness]

@@BeefIngotnot everyone wants to spend 600 on a printer, especially for their first one

[@BeefIngot]

@@Digitness Its tiring hearing this. Sometimes the minimum level for a good thing is just what it is. Now luckily since then there have been cheaper minimum levels coming out, but it is what it is. Its jot abojt what you think you want. People often simply dont know enough to know what they want. I do, so I share that.

[@RumenBlack]

It seems a lot like an ender3 thats just gotten all the upgrades most members of the community recommend. Very cool.

[@joeg1992]

It's Klipper, you can put that firmware on pretty much any consumer printer out there today. I run it on my Creality printers but it won't run on my FlashForge.

[@hazonku]

My first printer was a piece of crap ANET A8 running some random old version of Marlin and it cost me about $170 on sale, back in early 2017. I then dropped another $25 to immediately replace the PSU (which was a known fire hazard). It was basically a bad Chinese knockoff of a PRUSA MK2 with a crappy laser cut acrylic frame. I probably dumped another $250 into it just fixing things & upgrading parts over the years. Being able to get something this amazing for $299 shows how far things have come since then. I definitely my grab this one of the 3 Max for my plastic squirting needs.

[@matthewswan1873]

Don't stop swearing! I love it. I like hearing reviews by adults... Boiling down reactions to fit delicate sensibilities takes all the flavor out. I'm not sure if any editors or anyone has complained or not, but if they have, tell them I told them to go fuck themselves, this was a great video. Like seeing your take on these things!

[@UnderC2]

I just got a Neptune 3 Pro and it's been great so far

[@CuttinInIdaho]

The little fan by the nozzle is to keep the heating block from over heating and to keep temperatures within range. The one on the left and one on the right side are for layer cooling with the big blower accompanying those.

[@mayankjariya7148]

About the prices, Dan- you realize that the 3d printer is just a hot plate, hot glue nozzle(almost), and two motors. held together by the cheapest LAN enabled microcontroller. with enough engineering and software know how it can be very cheap.....

[@lonesimba]

TBH this one looks a lot like a Ender 3 S1 Pro, it has Z motor sync as well, magnetic HB, nice look, print head connects via just single ribbon cable, but spool holder isn't screwed into frame, just clips. And also it doesn't have Type-A port or internet connectivity, but it doesn't feel too bad, i was planning on repurposing my old Galaxy A8+ into a print server anyways

[@Krydolph]

I want more Linus house stuff (or maybe just house stuff would do, others might want to have their houses invaded for cheap upgrades?) and I want more Dan stuff! And the videos that had both, that is what I REALLY want, it is one of those things where the results adds up to something better than the sum of the parts!

[@se77ra57]

its insane to see how far 3d printers have come these past few years and how low the prices have become

[@yashasvihanda6516]

17:32 reggie couz “ohh my gawwd” moment right here 😭😭🙏

[@DoRC]

The small fan is for hot and cooling the two larger fans on the sides are for layer cooling.

[@dagingerdude]

The expletive at the end really has me very interested. It is also nice to see Dan this perturbed about a printer 🙂

[@Tommy_The_Gun]

The printer I am currently using (and it is also my 1st 3D printer) is Creality CR200B - And for the 1st printer it is actually pretty awesome. The only downside I can think of is that bed levelling is not automatic - it is same as here (4 knobs & sheet of paper trick). But again, the price point is similar to the one in the video, but what you get instead of way too fast printing is fully enclosed printer that is pre-assembled & works out of the box. I was even able to print some ABS stuff and it did not failed. And it is not that the printer is slow. My default print speed is set to 60.

[@MrPerfectjake]

This looks a great upgrade than the Neptune 3, which i bought as my 1st 3d printer. Just unboxed my Bambu Labs P1P today, which I bought because of Dan's review.

[@thecyberquake618]

​@@monki_sudo where are you finding a p1s for $400? Neptune 4 Pro is going for $300, P1S seems to be $700 most everywhere I can find it

[@kwedl]

@@monki_sudo For "only" 100 bucks you can buy a bunch of filament rolls though. Most people won't need the P1S enclosure or other small features, if anything since most people just print PLA or PETG you are better off without. Or you can print your own with less money.

[@shanematthews1985]

@@kwedl yeah the enclosure isn't really required unless you plan to print certain materials, as someone only doing PLA I would have to have the door open anyway if it was enclosed, the P1P is a damn good little printer though

[@shahmeer911]

Legit one of the best short cicuit vids

[@theongothic182]

dan is is the second anthony for me, i can listen to this man for hours

[@papaplintus]

Glad I preordered one earlier this month.

[@brokenwing]

Dan is a fantastic host. Hope to see him more often! I know nothing about 3D printing, but thanks to Dan's enthusiasm and knowledge, I found myself ready to throw money at the screen when he said the price

[@K.G.x7]

"I'm happy again. Um, that's kind of nice. I mean I'm not as happy as I would like to be..." Me too brother.

[@Makeitblueagain]

I just got a p1p pretty good but this one is really making me want to return it!

[@shorb2289]

Don't be dumb the p1p is so much better substantially than this junk. You made the right choice this printer is just bad in comparison to the p1p

[@MR-vg7yn]

Honestly, it would be nice to just put the price near the beginning of the video. Yeah, I know, keeping the price question open keeps up the "suspense", but.... for me, it just makes me look up the price of the thing you're reviewing, because I want to put what I see into relation with the price. At $300, although I don't really need a 3D printer and would have to think about where to put it, I'm still tempted. This is pretty amazing.

[@The9El9Nino9]

I was actually hoping you would do this review/showcase.