today we discuss the proper way to set assemble your vehicle to ensure proper steering travel.
Пікірлер: 157
@PerryCodes6 жыл бұрын
Wow. This has to be one of your best vids yet. Especially for folks relatively new to racing. While I've always been particular with regards to the build measurements, I've never realized that my steering endpoints have never been set far enough - what you've described as "full lock" in the vid. Good stuff J.
@NikkiNexo7776 жыл бұрын
Great explanations of steering. I'm saving this video! Well done.
@TheBloatedPony3 жыл бұрын
What an easily overlookable thing. Nice job getting to the "why" of it. Of the better technical youtubes I've seen.
@zebulonevans6 жыл бұрын
Nerd out this is awesome. I loved the practical tip at the end. I have never paid close enough attention to this and have had many cars that steer differently from left to right. Very helpful thanks!!!
@33boblong6 жыл бұрын
Great review Jason thanks for doing this video this definitely is helpful for setting up the steering on all if not most RC cars
@CarminesRCTipsandTricks6 жыл бұрын
This is an invaluable Piece of Information!! I'm an Old Fart, and have been out of the Competition Stress Pot for almost 18 Years. STILL, this is Excellent info for EVERYONE at every Skill Level. Proper Tuning gives you more satisfaction, helps your Car live longer, and saves money - because a misadjusted Suspension can wear out Tires, Bearings, Shocks and other Components much faster than a well maintained Car!! Just Subbed - I'll never be TOO Old to learn new things!
@rileyrika79476 жыл бұрын
awesome points. its these little things that make a difference that you may not think of. really appreciate it
@user-ck5hv6ty9n6 жыл бұрын
Thanks for the info Jason!! Steering is always a problem for a lot of us when we first get into it
@wilschell99846 жыл бұрын
Never even thought about that. Thanks, great videos keep these nerdy videos coming.
@mykolin45603 жыл бұрын
Don’t usually leave comments, but you helped me solve my servo/steering issue. Just needed this kick in the pants. Thanks my man!
@XENOEFFECT4 ай бұрын
Thanks alot for the help 🙏 you kept it simple and to the point
@jklanman16 жыл бұрын
Great vid..... Nerd out bro nothing wrong with in depth explanations and getting technical on us. I enjoy it, can't wait for the next one on this topic
@HillbillyThangs6 жыл бұрын
Nice tip at the end! I learned that racing oval pan cars. We would do that to see how free the car was week to week because we dailed out so much steering with dual rate.
@andrewprentice91166 жыл бұрын
love to see more of this kind of video....great job!!
@erikthegoprofanatic44376 жыл бұрын
This is a fantastic video of an expiation. People ask me all the time to driver there cars and that is the first thing I would notice. The circle thing at the end of the video I do before every race along with trim to keep my car consistent
@wildeb33stproductions616 жыл бұрын
Thanks for the video Jason!
@roberttannenbaum67796 жыл бұрын
Jason it's great information an keep them video's up an how to vids thankx for your time it's helpful an not nerdy it's a must so thankx Ryan what's up
@johnmiller45534 жыл бұрын
YOU DO A GREAT JOB EXPLAINING EVERYTHING
@stxticzyro70902 жыл бұрын
no he doesn’t 😐
@mikeymike32406 жыл бұрын
Fantastic video man , very instructional and easy to understand.☺👍👍👍
@toxicbullet73596 жыл бұрын
I needed this video. Thanks!
@randomness32355 жыл бұрын
This was great, especially about considering those arcs.
@Ratboycure4 жыл бұрын
Really informative and clear will have to watch the rest of your videos and sub. Thanks
@patandbrandi5 жыл бұрын
U make some great info videos man. Thank u
@jameswheatley98836 жыл бұрын
Great video man! Very helpful.
@richbc5176 жыл бұрын
Salute to you jason for sharing lots of informatiom to the rc fans...i hope u will continue what u do and more power to you and ur family..salute
@rc31514 жыл бұрын
This was really helpful thanks for sharing. It is so frustrating I am just glad I am not a kid in the 80s again. Information was just so hard to get hold of. Thanks again
@mrwill09104 жыл бұрын
I like the explanation. I’m new to whole thing and have a small beast slayer from eBay and im just getting used to doing it so. Thank you for the info.
@manaz28jose6 жыл бұрын
Another great Vid Jason. 👍😎
@toddbrewer9687 Жыл бұрын
Thx really helpful video, I'm dealing with a couple hosses that have high dollar steering servos in but won't turn under a load under full throttle so this definitely helped.
@Richiebigdaddy6 жыл бұрын
Yah good call on the turning radius- been doin it for years - lining it up on a line outside on the concrete checking steering is equal left to right at 100 percent dual rate and also 80 percent dual rate- definitely needed with protek servos that don't buzz under endpoint stress
@ScottzillaRC6 жыл бұрын
Great info, thanks for posting!!
@charvelgaming29756 жыл бұрын
Great video Jason, Good point that not every car is setup the same. Can't say how many cars I see at my local track where steering is an issue .
@danielibarra41994 жыл бұрын
Way to explain things man. Big round of applause. T.Y.
@fondfarewell26 жыл бұрын
I use to do dumb dumb things to try to get my car to steer evenly, it has to be right from the start, it's a chain of things that will go wrong if not done right. Great video jason.
@rcmikeklein55126 жыл бұрын
always nice to hear from a racers perspective.
@danielkonrad14445 жыл бұрын
Great Video man. Thank you!
@ShadowCZ753 жыл бұрын
Fantastic Video for fix the problem
@andrewmyers33864 жыл бұрын
You did great very informative thank you
@chrisvanrooyen8982 Жыл бұрын
I did not even think about the servo being placed differently on the spline from car to car. Rc aircrafts everything is always 90 degrees. Thank you for this video.
@joevasquez17764 жыл бұрын
Great video as always
@KarmeloPlays2 жыл бұрын
thanks you just helped me align my servo
@CrabShakMan Жыл бұрын
Just getting into it ty bro helpful
@vick93333 жыл бұрын
Wow 🤩 I really enjoyed this video, because that’s where I struggle with my HPI Recon. Because they don’t share servo specs on recon.
@jeffbryner53554 жыл бұрын
I have a spektrum 6040 and when its its zeroed out the horn goes on like you tlr pic. This is prob why there menual shows it like that since tlr and spectrum are owned by horizon. My sc5 shows it straight in its manual so i have to adjust the trim to get it even. Great video man!! Keep them coming
@zombienascar33966 жыл бұрын
Great video!!!!
@GabrielChua756 жыл бұрын
Great vid Jason! 👍 Will you share how you dial in the alignment using subtrim and trim please?
@DClavalois6 жыл бұрын
Jason keep these videos coming. Next topic anti Squat ...maybe??
@PopalongRC3 жыл бұрын
Great info bro
@aimnc89592 жыл бұрын
I thought my cars can turn until I saw this. Just wow. Super snappy.
@nicholasmarshall31916 жыл бұрын
Perfect! I am building a used Xray XB8E and it never occurred to me, to look at the original instruction manual for the servo horn size etc. Thanks.
@jaesrcworld39536 жыл бұрын
Great video
@OtherSide..2 жыл бұрын
Digital calibrator you're the man
@deviloftasmanianhobbiespro68456 жыл бұрын
8:.31 That how Matt Francis show me one time to make sure my steering was right.
@dinilkumbukage733 жыл бұрын
Thanks helped allot
@jamesvanhook846 жыл бұрын
Good video Jason. Another point that some people don’t consider is any steering link change will effect endpoints. After a toe or Ackerman change it’s always a good practice to readjust epa. As a rule of thumb toeing in requires more epa and toe out the opposite.
@dizzychizzy111 ай бұрын
Thanks a lot bruv, I sit for ever going back and forth wondering if it’s right or not. Am I stressing the end points or not etc… I’ll get the manual out and re run the install procedures… Cheers Chris.
@alvisgineika93066 жыл бұрын
was and am very picky with messures and very happy that do s oas enjoy it alot
@RcOffroad95133 жыл бұрын
Ain't that the truth! Great vid!
@alfa71085 жыл бұрын
Good vid I'll try it. My Kyosho barely has any steering at all
@timnelson96576 жыл бұрын
center your steering on the radio before installing the horn as well
@beckettheindl54144 жыл бұрын
Jared Harris adjust the servo horn and center it and you should be good
@RakeshKumar-ep6np4 жыл бұрын
My car is bad
@waynerc24206 жыл бұрын
Thanks Jason
@rc-trassa Жыл бұрын
Thank you🙏
@Darkatvar6 жыл бұрын
I already want the follow up videos on this subject.
@gti27566 жыл бұрын
Thanks Jason! My servo is doing that jittery thing every once in a while what does that mean?
@alfa71085 жыл бұрын
Good vid. I went out and bought a Kyosho rb6 rtr after one of your reviews. Great car but the steering suuuucks. Id appreciate any suggestions.
@geba945210 ай бұрын
DAMN U WAS SMOKIN ON SOME FIRE>>>>
@BobbyJr5565 жыл бұрын
Maybe you can help me, I’m still a noob at this... got a losi super rock rey that got into a big crash. Replaced bent parts due to torque twist on acceleration but that’s another concern. My current concern for now is steering/servo... I’ve replaced the servo with the same brand that came with from factory with the same horn and bellcrank. I’ve tried so many times to center the servo horn so my trim can stay in the middle, but for some reason that I don’t know. I could never get the servo horn to stay neutral with the steering trim in the middle... it’s either I’m on the far left or right. And there isn’t much movement I could do with the servo horn. I only move it like a tooth back and forth. And seems to be way far off... what else adjustments can I do? I’ve tried doing end point adjustments but it seems gotten worse...
@michael-zc7ho5 жыл бұрын
love the video just not what im looking for
@burmese4345 жыл бұрын
You can go to Harbor freight and get a digital caliper for under 20 bucks with the digitals screen. Hope this helps
@AdvBrewery6 жыл бұрын
Jason, are you an engineer? Saw the 3d part in the background.
@corymikesina60683 жыл бұрын
Hey Jason I know its not a buggy but hopefuly you can help me out. My arrma infraction pulls to the right and slow crawling speed as well as at fast speed. Ive tried everything! New chassis new bearings so steering servo replaced all parts that were bent and binding alignment looks perfext to me. Ive re set radio and recalibrated. Pretty much only thing I havnt tried is a new radio and reciever. Nothing is binding. This has been driving me nuts! Please if you could give me your input id appreciate it. Ive been tinkering with this for weeks!! Ive stripped the car down 3 times cleaned everything and inspected everything for bent or broken parks.
@ADVENTUREKM6 жыл бұрын
Some people say turn down the speed on the servo through the radio does this help?
@travispratt63276 жыл бұрын
What buggy is that? Looks somewhat similar to my Kyosho sand master which was my fav buggy
@JoseRivera-mj9fx Жыл бұрын
Hello I just built my first drift car but my steering does not self straighten outs after a turn also my steering arms rotate as opposed to move back and forth when the servo pulls the steering link so you know why this happens?
@87deras5 жыл бұрын
U explain things well n got me to subscribe. New booty here so I'm just all ears. Lol
@andyrichey11926 жыл бұрын
Thank you this is what I've been trying to learn about the hobby. I subscribed to your channel I'll be watching for more,
@ceff014 жыл бұрын
help please i have a rock rey 1/10. It has alluminium wheels and big tires 6inch. a bit heavy and when i turn left and let go it centers fine then i turn right and it dosent center well it will stay more right. its a 6v servo but would a 7.4 hv servo help with that thanks.
@charles0423 Жыл бұрын
If you have a linkage where there is slack you can try and plastic weld the slacky parts together
@bobbymalta732 жыл бұрын
Thank You..
@daveknight51532 ай бұрын
Thanks buddy how can i fix my wheels on my carnage I've brought so mwny things for it and still having trouble with it 😕🤝
@siouxunit174 жыл бұрын
That's steering for you. Always a chase game
@Johney_Nomadic888 Жыл бұрын
Any idea on fixing stiff steering on a new build, the Kyosho MP10e? Not sure if it's overtightened bellcrank or WTF is happening. Any help is appreciated. Thank you!
@richyox9486 Жыл бұрын
Figure it out yet?
@thomashudson70016 жыл бұрын
What car is that in front of you in the video?
@JohnDavis-bg7cz3 жыл бұрын
3 years on still helping out
@delawarepro3539 Жыл бұрын
Is it true pillow ball don’t steer as well as c-hub? Thanks
@LymezoidBeats4 жыл бұрын
Great video!I have one question though: What if your servo is perfectly aligned, then you turn it on, it goes in a random direction? Thanks!
@cwatson427854 жыл бұрын
You are supposed to turn it on with yoyr transmitter set to zero. That will center your servo and then you out your horn on. You must have your horn on while it's not centered and that's why it's centering when you turn it on. Also it could be a dead servo that locks right or left when it's dead
@workingclassperson2124 Жыл бұрын
My maverick ion steering is weird I have trim it just one click from Full max left for it to go straight
@MrBowlingjt3004 жыл бұрын
Great video! I am a complete noob to this. I just finished building my first rc car build (tamiya Tt-02). When I turn it on the wheels immediately turn sharp right and stuck there. Is this a potential operator error with the servo setup?
@angel_btw55762 жыл бұрын
This is happening to me did u fix it? ( considering its been a year )
@edwinsantiago76395 жыл бұрын
What happens if servo horn cant center,and then use up almost all the trim to center?
@macelius5 жыл бұрын
What if my servo turns more in one direction than the other from where it centers?
@burkey1878 Жыл бұрын
Can anyone help? I’ve just got my son a DEERC 200E. We took it out today and when it’s set down on the floor the wheels barely move from left to right (no steering) When it’s off the ground the wheels will steer.
@1187steele6 жыл бұрын
Feel free to nerd us out lol
@r.r.hughes98086 жыл бұрын
Can you tell me if Short Course is dead? It seems up here in the Pacific Northwest it has died. Just curious about your area too. Thanks
@nitrocrew_6 жыл бұрын
R.R. Hughes Out in Nor Cal the pickings are slim there were like 28 trucks at rookie night (Sat) so people are buying them and racing at a lower level but there’s still hundreds of the same buggies every race night out here if you haven’t copied the same mods and set up as 50 other guys your not cool...
@linlinlixin26374 жыл бұрын
I've put two servos on my rig and they are really weak. I've put them on a different rig and they're really strong and fast, any one know what it could be?.
@a1_west9523 жыл бұрын
my servo is inclined too, not sure if this is right since i have no manual, it is a RTR car. servo name is B7018
@nulk16 жыл бұрын
What happened to that set up video you had up before (I think around 2 months ago) I wanted to show to a friend and it was taken down. It had a lot of good info in it what gives?
@t2nate1376 жыл бұрын
Should I try to upgrade my slash 4x4, or get a tekno mt410? For some club racing. What do you think Jason?
@zombienascar33966 жыл бұрын
Tekno bro
@stuffandthings40266 жыл бұрын
Try the tlr sct 3.0
@zombienascar33966 жыл бұрын
Yeah I still rock my 810
@PerryCodes6 жыл бұрын
And if this is nerding out... Then bring on the nerding!
@miklocastro96776 жыл бұрын
I have a problem with rc when I drive the rc it automatically turns to the side I need help to know how to make it go straight
@tahayt61424 жыл бұрын
I have an rc car that when I turn it on it turns to the right and the Servo dosent responeds to my transmitter please help
@JamesAustinTrickShots4 жыл бұрын
Have the same issue with a rc car and boat. Did you have to replace the servo?