Should You Buy? | Cordless andis Master

Should you buy the cordless andis Master? Ill give you the Mr.outliner review.
How to do a edge
up • How to apply hair fibe...
Drop Fade with Waves
• DROP FADE WITH WAVES H...
Wahl Detailer
• Wahl Detailer | Cordle...

[@MrOutliner]

Thx for watching. Make sure you like, comment, and subscribe. Also watch my last clipper review here kzbin.info/www/bejne/hZjEn61tbZqZjqM

[@Mike-hy8cs]

For everyone that has trouble blending with the masters... Make sure its adjusted close dont zero gap it cause its going to eat your guards and make a ton of noise. Just get it close and it will remove the skin line fine. 1. Blade open about 2 fingers width (when you adjust your masters it opens to about a half halfway open on a wahl) blend the guide out using the notches. Its fool proof and will blend perfect everytime and quickly if you go through all the notches trust me. 2. 1 guard open another 2 fingers (same thing with clipper adjusted it will be your 1.5 guard halfway open) blend the guide out using notches. 3. Some hair types may leave a faint shadow or line between the blade open and the 1. (Remember you jumping from half halfway open to a 1 closed its possible it doesnt blend perfectly) All you do is use no guard open or slightly closed from open and flick out at it using the corners of your blade and it will blend clean into the 1. Or if you not comfortable doing that put the 0 guard on and go from halfway then closed and flick it out. It comes out easy it just sounds complicated. 4. Fades done from skin to a 1.5. At this point you can do clipper over comb scissor over comb or use more guards for the rest. Up to you. Notice that you can do the whole fade with just one guard reliably with the andis master saving you a ton of time. Hell when im fading i literally just keep the 1 guard in my off hand the whole fade process cause its the only guard i need. Hope this helps!

[@desmondmitchell5602]

Mike u the man to take time to text all that but its appreciated much love

[@Mike-hy8cs]

@@desmondmitchell5602 no problem i know it will help someone who is struggling

[@johnq.random7360]

Just un-zero gapped mine and you are correct, not as noisy. Also, I see one of my purple magnet guards has little white stress lines underneath where the blades (once zero gapped) touched the plastic and were lightly sawing into it.

[@Mike-hy8cs]

@@johnq.random7360 yeah if you have trouble with the skin line with the masters i reccommend people to have a second clipper with a fade blade/flat blade to remove the skin line then switch to the masters for everything else. I never zero gap the masters its not what its for with the standard blade. Its meant to make blending easier not removing a trimmer line or 0 line.

[@johnq.random7360]

@@Mike-hy8cs No fades for me as my hair is a quarter-inch to a half-inch all around my head. It is quieter though and my guards are no longer at risk. Thanks for the info.

[@FadeMasterLos]

Going to get my pair today. Had to watch Mr. Outliner Before I Made My final Decision💯. Great Video 💈

[@MrOutliner]

💯

[@The667tony]

This machine with a zero gapped flat blade is the ultimate beast.

[@kishadixon589]

I have them but I have used Wahls and Osters for years. You said the guards are different should I go up 1 if they ask for #1fade😊

[@shinigami1315]

I have an idea for a really good video. Wish sells these really cool looking wireless trimmers for like 15$ they are metal and have a skull on them. I've seen good reviews on the site but who knows. Those wish videos are going viral lately. Also respect. You got yourself a new follower. Keep up the coontent.

[@SummerStormsz]

New gold ones are out. Ibuse magic clips but want another set of clippers also should I spend 400 for them???!!

[@devinesspecialtiesllchustl2037]

I love my masters just not willing to pay 300 for them yet, because I'm still a student can't justify that expense. I have bgrc detachable and bought battery pack for them as well as a few more blades. Love those cordless detailers, they feel so good in hand. Leaning towards those metal magic clips. Kind of an andis guy.

[@MrOutliner]

Yeah they’re definitely expensive. But that’s why I did the review. Hopefully it helps with a decision. I have a metal magic clip review also

[@devinesspecialtiesllchustl2037]

@@MrOutliner definitely been keeping up with the channel. Sometimes I watch videos multiple times.

[@MrOutliner]

Devine's Specialties LLC Hustle Show 💯

[@jdoveist]

I've got to get me a pair!

[@mensclubbarbershop]

If the battery charge runs out, can you immediately plug in and start using like a corded clipper? At full power?

[@MrOutliner]

Yup

[@diz354]

Do you know if the Andis single magnet guards will fit on this clipper?

[@MrOutliner]

I believe so.

[@traejayblendz9360]

Everybody's hand touch is different. Some love masters some don't, but overall it's all about the touch you can use any clipper.

[@MrOutliner]

That’s facts. The guard system is slightly different

[@devinesspecialtiesllchustl2037]

They make those addtl magnetic guards that match Wahl increments.

[@The1977lamont]

I have these Clippers and they work great

[@jonscott5080]

The guard sytem is different for the Master because it opens up to 1/8 inch. Therefore illiminating the need for the 1/2guard.

[@MrOutliner]

Right. Good feedback

[@nicholaschallita2472]

Do you think putting the wahl magic clip stagger tooth cutting blade on the wahl 100 clipper is the ultimate clipper?

[@MrOutliner]

I guess you could say that. That way you get the power and blend

[@kodee81]

My dude about watch the video salute to you homie

[@MrOutliner]

💯

[@tajwood7370]

my favorite clipper haven't tried the cordless but hope too soon

[@MrOutliner]

Cordless sucks

[@yourmobilebarber4186]

Used corded Andis Masters and Wahl seniors all my years cutting. Been using cordless magic clip and seniors the past 2years and been disappointed. in the cordless game with everything I tried to replace them with was not enough so I had to get cordless masters. Sadly I wasn’t as impressed as you are and took one more try at Caliber 50 cal mag and man I was so impressed I got rid of all Andis and Wahl cordless. With a Caliber taper on one and Wahl fade blade on the other, I now finally have the best blend of Wahl/Andis in .50 cal mag. Sorry, got to excited back to Andis cordless masters; 1.too noisy 2.they are more bulky(I have big hand) 3. 90min run time sucks 4. Way over priced. They do cut good but won’t last long as the corded would. JMO. Anyway great review man

[@MrOutliner]

I think you hit some key points. Although I like the cordless master the run time does suck. Also they are overpriced. I like wahl better just because it feels better to me. And that’s the most important things. Comfortability

[@yourmobilebarber4186]

Mr. Outliner totally agree sir

[@yourmobilebarber4186]

Mr. Outliner new to KZbin but check my first review kzbin.info/door/1J0arOAI7vAT8_eRl4kpeg

[@barberCambodia]

very good clipper

[@saltybeatz1]

Will it be good for bald people that like to keep their hair almost nothing? I use the Old-school burgundy classic osters and they do good. I just want to make sure this is not a T trimmer style

[@MrOutliner]

JASE SALTER they are not for balding.

[@peteross4879]

I’ve been cutting my hair for a little over 10 years and started cutting both my young boys hair. I’ve been using a Wahl $60 precision clipper that overheats after 20 mins. I bought it 5 years ago and I think it’s time to upgrade. I’m looking for something of quality that will last a long time and doesn’t overheat or doesn’t have a noisy motor. What do you recommend?

[@MrOutliner]

Magic clip

[@gabrielwright1789]

Good lookn out sir!

[@shpritziano]

urmeaza sa o cumpar si eu...sunt foarte curios care este diferenta dintre andis si magic......

[@familyman8644]

I need to cover up that blue light. My only complaint why I like the wired masters better. I was gonna get the zr2s but I don't think they can use guards. You have to clip on different size blades. Thats great and all but its just for personal haircuts my wife does and ive taught her how to fade. I might just get the corded version andis master with all the magnetic blades and blade brush for 200. This model is 230 and you have to buy all that shit separately

[@brianrandall6341]

Thanks Bro

[@Wendolushart]

I had a hard time blending it too, I guess I'm too used to using whal. I did do the Andis Master blade swap on one of my whal 1919.

[@christopherwilson848]

Did it work with the whal guards

[@TinoXStudio]

@@christopherwilson848 no not for me it didn’t

[@familyman8644]

Whats the best clippers around 200 that comes with guards?

[@MrOutliner]

The senior by wahl. Comes with premium guards s

[@sols9449]

Can I ask you a question please. When I cut heads over the top I usually go from the top of the forehead back to the head. Then I do the bottom by the back of the knock to the top and the sides from the sideburns to the top. You were going from the back of the head to the front. Is there a reason or just a preference thing.

[@MrOutliner]

Mainly a preference thing. But most people like you to go with the pattern of their hair. And also I like to start from the swirl at the back. Makes it easier for me

[@sols9449]

Mr. Outliner oh I see. Thank you.

[@bthebarber916]

SOL SHALEM he was going with the grain

[@Mjbentertainment86]

I know u didn’t ask me this question lol but the dude in the video had waves in his hair. Most ppl who have waves get their hair cut “with the grain” which is from the back of the crown to the front

[@Armandos82]

Andis should have put a brushless motor and a bigger battery for the money they're charging, but you can't get everything you want. Good review.

[@MrOutliner]

That would have been good. But I like the fact that it’s lighter. They make it where you need 2 pair. The hustle is real lol

[@Openshop247]

I had the same problem with mine.... first day they weren't cutting right...almost snagging and not blending right.... took the blades off oiled them good and haven't had that problem since

[@EricGibbsSr]

Im a zero gapped fastfeed w/ceramic blade(omnicord) user, these or babyliss? Did anyone mod these yet?

[@MrOutliner]

Not that I know of

[@curley1972]

Like the vid my brother getting a pair myself

[@captainsmackahoeg5659]

Hell yea i would. Got mine today, im already saving up for a second pair

[@MrOutliner]

Right

[@triston9400]

How much are they

[@AndreClassicCuts]

🔥🔥🔥 let's get it 👌🏽👌🏽👌🏽

[@LifewDwight]

Andre' ClassicCuts fuck you

[@LifewDwight]

And your cuts weak

[@Vegas-ky3lt]

You really don’t need Expensive clippers and extra expensive Trimmers to do an amazing job on someone’s head you really just need the Talent. Real talent Doesn’t need the hottest new clippers on the market every year. If you take care of your clippers they will take care of you. We live in a world where people just constantly want the hottest new thing when it literally does the same thing your present clippers do.

[@ricolion3340]

Yup but you do need some pretty good clippers because the cheap ones heat up way to fast

[@egotisticalquan7247]

Mr. Outliner I know you said that for the mentioned results Andis said don't zero gap BUT how do YOU feel about zero gaping Masters in your 20 years experience or anybody else that can answer that question to whether it's a drastic experience doing it.

[@Mike-hy8cs]

The reason you dont zero gap the andis masters is because if you zero gap it it eats the guards. It will make a loud noise whenever you put a guard on. What you want to do is adjust it close enough where it removes the trimmer line but not close enough to where its going to eat the guards. It may take some time to get it right but once you set it right its the best cutting clipper in the world imo. This is coming from someone that has used pretty much every professional clipper there is except for jrl and caliber. Hope this helps.

[@egotisticalquan7247]

@@Mike-hy8cs Thanks 🙏🏿

[@andrewsmith3095]

I kinda want these. But that blue light looks like it’d be really annoying

[@gahazero]

I Just got mine💞🤘 subbing💪🏼

[@mike8462]

awesome video man! would you prefer magic clips or wahl seniors cordless and why?? jw

[@MrOutliner]

Depends. Seniors are more of the all purpose. Cuts thru bulk better than magic clip. But the blending is much better and smoother with the magic clip. So depends on what you’re trying to do.

[@mike8462]

@@MrOutliner how about fade blade vs curve in your opinion?

[@MrOutliner]

Again depends on what your trying to do. Fade blade is more for bald fading and shaping and also trimming wild hairs. The taper blade is more fore blending. Imo.

[@herondelacerda]

Mr. Outliner couldn’t you just the magic clip stagger tooth blade on the senior to make it blend like the magic clip ? My co workers said they tried but it pulled hair not sure if true though

[@MrOutliner]

Not sure. I never tried it

[@lexlarkin]

Yes...but how does it compare to the Wahl Magic Clip straight up.

[@MrOutliner]

I like the magic clip better.

[@lexlarkin]

@@MrOutliner Thank you Sir!

[@CounterclockwiseJ]

Do you have to get it tuned?

[@MrOutliner]

No

[@t-realtv3858]

Do you prefer these or the babyliss

[@MrOutliner]

These most definitely

[@user-gi3xj8nz3s]

Dam your camera came out good. What type are you using? The video great by the way. Keep up the good work.

[@mauriceporter2394]

I can't wait till mines come in the mail

[@mauriceporter2394]

Been using mines since Friday. Love them

[@MrOutliner]

Yeah I’m slow but surely getting into them.

[@bsinatra145]

How were they?

[@EeveeLO6]

Red Babyliss FX or Andis Masters cordless?

[@MrOutliner]

I don’t have the red babyliss fx. But I do have the rose gold version. IMO I like the masters over the babyliss at this point. I haven’t use the babyliss in a few months. I like the wahl magic clip overall

[@Mike-hy8cs]

For me id get the masters cordless cause honestly if you have a cordless senior or magic clip the babyliss dont cut that much different than them. More power and battery life for sure but in terms of performance it isnt much

[@EeveeLO6]

Thanks!! I’ll be ordering a pair of masters.

[@louieanderson5246]

Would you zero gap it? And obviously if you zero gap it won’t be cutting at #1 length

[@MrOutliner]

Right and I didn’t adjust them at all

[@thenotorious2322]

How do you zero gap your Wahl Magic Clips, with ceramic blade? Or adjust the blade?

[@thenotorious2322]

And is it okay to cut down hair with zero gapped clippers? Like is a zero gapped length different from a non zero gapped clipper?

[@anthonyramirez2576]

What it is ffoo

[@cosimopedulla4767]

Whats the best replacement Blade for andis masters cordless?

[@MrOutliner]

It has to be the exact blade that come with it. The regular master blade does not fitn

[@cosimopedulla4767]

Oh ok. Thanks. So you think Is Better if I Just leave the surgical blade and zero gapped It the way It Is, right? Bcaz some people Say the flat Blade Is Better to fade

[@MrOutliner]

You asked for replacement blade. But as far as fading. The fade blade would be better for a beginner

[@cosimopedulla4767]

Ya Sorry, I got confused. Which fade Blade do you reccomend for the masters cordless?

[@Cesarcoast1000]

Does anyones cordless masters blade start getting super loud and the only way to make it stop is by switching the blade to a new one?

[@MrOutliner]

Make sure it’s the right blade for the master. They are not all the same

[@Cesarcoast1000]

Its the right blade ... i bought another blade this week my 3rd in the last 2 weeks ... when i put the new blade its the normal loudness it gives out ... then days after it get loud af ... only way is puttin in a new blade ... i might just get a new one and hope its the clipper

[@seanducey7467]

The masters open is that completely equal to a 1# on the wahl (3mm)??? Love the video

[@MrOutliner]

Yea

[@Mike-hy8cs]

If you adjust the blade close to take out the skin line it opens more like a half guard halfway open. You will notice it sometimes doesnt blend perfectly into the 1 guard closed. You either have to flick at the line with the blade open or put the 0 guard on there and smooth it out. Its pretty easy to get out though so definitely suggest adjusting it unless you want to use another clipper to take out the skin line.

[@mershatamrat2282]

No it’s not it’s a one like the oster number one

[@seanducey7467]

@@mershatamrat2282 bit late replying I asked a year ago I have masters like 6 months🤣

[@mershatamrat2282]

@@seanducey7467 sorry my man just thought I’d still answer lol

[@joelpowell6126]

You can buy the 1 1/2 guard

[@MrOutliner]

I did after this video

[@anthonyvaldez6239]

Throw that ceramic blade on it bro works well and doesn’t get hot

[@nicholaswillette2555]

Mine heat up way to fast and cant cut through bulk to save there life everyti.e I buy these new hype clippers I always end up back with my magic clips at the end of the day

[@MrOutliner]

I haven’t had that problem at all. Just the run time

[@BigMundo22]

My corded masters couldnt cut through bulk either. Had them since 2016. Put em down because of the weight. Guess I'll buy the magic clips.

[@TheStonedHermit]

@@BigMundo22 that's cuz the cordeds are a magnetic motor, that's why they're so quiet and you can hear every little hair getting cut when you're fading, but not as powerful as a rotary motor which these are.

[@bigshotblack7530]

💯

[@keithbates8482]

Andis for life

[@devinthibeaux4178]

Should a beginner buy these ?

[@MrOutliner]

I would say the magic clip.

[@moralesball8365]

Mr. Outliner the Magic clippers been hard to get lately :(

[@MrOutliner]

Yeah. The distribution center is closed

[@troysanchez6477]

Hi bro...andis Master....1919.....babyliss4. ....?????

[@MrOutliner]

1919 then masters then babyliss

[@afterburner3999]

what are they likke after a year BLUNT.

[@MrOutliner]

Run time trash. They don’t last long

[@GraffitiJungel]

Mr. Outliner what’s the run time now?? Cause I’ll be cutting from home

[@MrOutliner]

40 min if that

[@user-zg8rp8uw6p]

I think ima just get fast feeds 🤦🏾‍♂️💯

[@MrJRD827]

What are those ur talking about sir?

[@maximme]

Andis website says its 60W !!

[@R2sojr09]

Wahl Magic Clip Cordless 👍

[@mattspaulding7488]

Masters are king.

[@MrOutliner]

It’s all a matter of what you like in your hand. I like masters. But the run time sucks

[@mattspaulding7488]

Mr. Outliner everyone’s loves magic clips. They’re my least fav. Bulk with model 10’s. Fade w detachable and touch up work w masters. For a head I run the masters maybe 10mins. Maybe

[@MrOutliner]

Nothing wrong with that

[@Joeybag0donuts]

Might wanna get two.... $600 later🙄😂

[@MrOutliner]

Hey. It cost to be the boss

[@Joeybag0donuts]

@@MrOutliner ima buy the stylecraft absolute alphas 💯 4 hour battery life. And u can use wahl blades and andis blades

[@eevee4408]

i’ll stick to my corded masters

[@shpritziano]

Ne ajuta foarte mult o masina buna...dar daca esti un BARBER bun faci treaba cu orice fel de aparat profesional....

[@AndreClassicCuts]

The masters are difficult to fade with in general

[@MrOutliner]

Yes. The guard system

[@BlackMusicGenre]

@@MrOutliner I don't find it the guard system difficult. It takes a little while , but it's not bad . This is coming from a person who used speed-o-guide guards for at least 15 years until I switched to andis magnetic guards 2 years ago. I just started using Wahl clippers (cordless) this year.

[@Mike-hy8cs]

It took me like two haircuts to learn how to use the masters from using wahl clippers only. You just have to realize the blade opens more than any wahl clipper. It opens almost to a 1. So basically you can do a fade using less guards with the masters. Saves time and i feel the masters blends a lot easier. Just gotta learn the lever and guard system.

[@BlackMusicGenre]

@@Mike-hy8cs I don't know why some people are hard on Master. Either it's one thing or another. Some people take the blade off of the Masters and put them on the new 1919s with the modification of a bracket . Masters were my first pair of clippers and like I said I just recently started using Wahls .

[@Mike-hy8cs]

@@BlackMusicGenre lol at the end of the day if you know how to fade you know how to fade. If you just picking up the masters and never used him there will be a learning curve but honestly it shouldnt take long to figure it out. Hell i use both masters and my seniors on my haircuts. They work beautifully together. Whatevers easier for you is what you should use at the end of the day. For me masters all day if you doing a skin fade going from 0 to 1.5. Less guards less effort blending. After the 1.5 im using my seniors for bulk cutting or just clipper over comb. But now once i get that cordless masters i may just bench my seniors entirely 😮

[@nusense808]

90 min run time is horseshit to be honest.

[@MrOutliner]

Why you say that. Mine ran most of the day.

[@Mike-hy8cs]

@@MrOutliner i think he is trying to say that there should have been at least two-3 hours of run time. Like every cordless clipper coming out now has about 3 hours or more of battery life now. Hell the newest jrl clipper has 7 hours of run time. For 225-300$ it should have the best technology in there. 90 minutes is just a bit better than the cordless seniors which came out a long time ago.

[@MrOutliner]

True

[@Beatbyawhiteboy]

I agree. For over $200, I'd expect several hours of run-time but nope, it last as long as a $70 Cordless Magic Clip.

[@Mike-hy8cs]

@@Beatbyawhiteboy exactly! Thats pretty disappointing and it doesnt have a brushless motor either. And maybe this is just being picky but it should include some guards at least.