Shower Drain Relocation | Shower Pan Construction

[@BenjiMannn]

If your watching this video. Please don't ever use a Sawzall on existing plumbing the vibrations can cause disruptions down the line and free up joint that can cause leaks. using an actual saw or pvc cutter is recommended.

[@jrad6028]

Especially if it's a copper drain line. Oh God

[@Joewalshe38]

Thanks for the video. Anyone doing a similar job might consider taking birs off the cut pipes as they can catch hair etc. going down the waste pipe. Also, don't let reciprocating saw blade cut through gravel as it will blunt it very fast.

[@4thaStreetslive]

The i

[@jimmski9908]

Doing a DIY bath remodel on a slab. Might need to move the drain. Hope I don't have to remove that much concrete, that was a huge hole.

[@marybassit8246]

Is it better to used sand or pebbles? My contractor here and I just want to make sure he doing the right thing

[@joecastillo8995]

You are right on the money with making drain level. Tile guys love you !!!!

[@DanielaRouge]

Splendid! Just what I was looking for! Thank you!

[@kimberlyparis2733]

Just what I'm looking for thanks much 🥰

[@jakerogers6027]

That’s awesome. It seems from my little experience that plumbing drains is a lot of trial and error. Appreciate your vids

[@MrAsm961]

Great video, learned a lot my friend. Looking forward to seeing more videos from you guys. Thanks

[@WINNI.Designs]

Thank you so much!

[@Eastbaypisces]

@@WINNI.Designs how u vent the shower? in the wall??

[@VP411Designs]

What about foundation concerns? Post tension slab cable with beams?

[@jochute]

Is there a minimum length of sandpipe before the pipe gets to the ptrap?

[@jt5747]

If you are talking about vertical distance, I don't think there is a minimum (as long as the inlet is higher than the outlet), but there is a maximum. Too high and the momentum of the draining water could carry all of it out of the trap, leaving it dry and open to sewer gas coming back up.

[@juancortes5876]

Will you be installing a vent for this drain?

[@marcodeluca4068]

Does the drain need to be located same side of shower head because I want to put them opposite sides I order to give me access to valves Incase I need to repair ??

[@tonyalvarez9314]

Send me the fricking shower head! LOL

[@LubaLuba1]

Hi any videos you know of regarding adding shower drain to toilet drain on concrete slab ?? Thank you!

[@WINNI.Designs]

Hello. Not at the moment. But if you DM me on IG with a picture I can try to help:)

[@joshuacassino7297]

I’m trying to add a shower drain to my 1/2 drain bathroom in basement, what’s best course of action to tap into plumbing?

[@OhGeeKevin]

You’ll have to use a 1.5” to 2” adapter from wherever you start cutting. Then you can start routing 2” piping to wherever you want.

[@mirancm]

What about the venting?

[@Engineer9736]

I’m here for just that lol. I put in my own shower, all finished, but still ended up with a pool of water at my feet. While the pipe underneath is 50mm in diameter. All the foaming shower gel blocks air from getting into the drain and then it starts to fill up. I had this issue already in mind when constructing the new sewer, got access to add a vent after discovering this. But the guy in this video may have it as a tougher lesson over a few months.

[@mirancm]

Richard... i was worried about that situation but i i just did my shower pan ,etc . I realized there was a vertical vent connected to that line so i didnt worry anymore.

[@nickpritchard7130]

why dont you use a P Trap which has joints that you screw together? Like the ones used underneath sinks? Are they not strong enough for when the concrete cures around them?

[@thepeopleschannel6416]

you cant access it under concrete anyway. it will just be more likely to leak.

[@d.vsinghbali7550]

Excellent job

[@KingSobieski]

Woulda at least centered for length and width if you already went through that much work to get it centered on width.

[@robertcortez4582]

It looks like you could have saved the part you cut out. Had you left enough pipe on your cut for a 2 inch coupling...you might have ended up just right. That's just my arm chair observation. Otherwise job well done.

[@ncscientist]

Dude sounds like Jim Caviezel lol.

[@brandonlamontcooper8141]

thank you for your insight

[@mineurnguyen9351]

Hi, can you tell me How much it cost to add shower and plumbing work to a half bathroom on my first floor ( ground) like this?

[@bkhoavo]

$5

[@rkb6783]

I REALLY DO APPRECIATE YOU... SHOWING PEOPLE HOW TO GET THE BASIC IDEA OF WHAT TO DO... Well, its just that when I watch people i can see the mistakes... When YOU watch me, YOU can see my mistake... & I do... & i have made boo boo's ! Then we are supposed to, Tell each other WAZZUP ! FIX IT ! Continue on with D.I.Y. project ! ACCEPT 1 THING, SALT ! PINCH OF. He said... Be sure to clean it out... THEN HE DIDN'T CLEAN IT OUT X 2 ? AUDIENCE IS NOW CONFUSED ! The best Construction rule is... Measure TWICE cut ONCE ! Not cut a bunch of times... Measure a bunch of times ? Now Im Confused ? Did the boss approve this video ? Because I also noticed you 16 inched from the studs... Ad on Sheetrock... Or backer board... Or seal-o-panels... & the shower OR tub wall panel kits. Or if you tile... Or decorative inserts... Can Push the measurement out any where from one inch ( 1" ) up to ( 4" ) Depending on what you choose to cover up the walls with ? So me say, Think about the WHOLE project ! Because 16" on 2 centers can move ! I always measure the depth of what ever the customer has chosen... Then make three ( 3 ) cross reference points... Outer edge is my third point of reference... The two ( 2 ) inside wall corners provide you're depth & width... Outer edge of customers choice I.E. tub ? Or shower kit ? Gives the length... Height is provided by the bottom of the shower pan... Plus the thicknesses of said shower pan... Or tub basin... gets you're height of the chrome screen cover plate Sorry man... I had too ! IS ALL GOOD SAID THE GREAT MAN !

[@micaonyx5301]

Yeah I'm a diy land lord and I was thinking about a few of the things you mentioned. That said, I've installed my share of p-traps for sinks, but want to try doing a shower so it's very helpful to learn how to do it right the first time to avoid almost right or close enough as is the case with far too many people professional and handymen alike.

[@adammmadi1850]

Great job,

[@পাইপফিটিংস]

I also know the work of pipe fitting keep me with you

[@YoungFlyMexicanNetwork]

Never measured cut a million times lmfao nah but for real bro measure twice cut once

[@analogsmog]

This is why we need the dislike button.

[@myutubeandy]

P-trap go "in reverse"

[@marcodeluca4068]

Does the drain need to be located same side of shower head because I want to put them opposite sides I order to give me access to valves Incase I need to repair ??