Building a SURFBOARD. Start to finish - Shaping - Glassing - Sanding

Building a surfboard start to finish. From handshaping the eps block foam to glassing stage and sanding.

[@alexmacdonald258]

in a lot of respects, it makes me sad-so much time has gone by. I used to build boards back in 1964-1966, in northern California. Seems like a distant dream now. We sure had fun, surfing, hanging out at the beach. Then I joined the Navy, and went away to war. When i got back, the entire world had changed so much it was unrecognizable. But I still catch the occasional wave, on a bodyboard, since I can't bend well anymore (at 75). Keep the faith young ones, keep the traditions strong!

[@jose2x784]

that's great enjoy bodyboarding sir, you have till 120 young man!

[@sage881]

That board looks so much fun to ride. Thanks for making this video!

[@mattdohrmann9942]

Love the videos. Right amount of tips and talking, great detail (and commentary) in the right places. Blew my mind with the tie dye glass job

[@Shrednaught]

Thanks mate. Appreciate it 🤙

[@Nayda44]

amazing ! please keep posting stuff like that, and especially keep explaining what you doing, it's so useful and people nowadays just want to keep things for themselves! super stoked man! cheers

[@Shrednaught]

Thanks man 🤙

[@mikeh8452]

So sick dude, wow. I didn't realize how much work goes into a surfboard, surfboards should really cost like $1,500 with all the labor of love that goes into them..

[@Shrednaught]

Thanks man 🤙 Yeh it’s quite a process when doing custom hand made stuff. This was about a weeks worth of work.

[@purplehickeybc6674]

Shh don’t let the companies know

[@chrisbauman2562]

That's why we are so grateful to ride.

[@user-ff6hd7rh9k]

Yeah we’re grateful enough to ride yeah we don’t need boards to be 1,500

[@pedroamaral5056]

awesome video, I'm on the beggining of my shaping journey and this gave me a lot of insights, like the way you set the first glass layers before placing the fin cups.

[@mikeelder6146]

Building boards with my primitive tools and skills seems ridiculous after watching this video. Still tons of fun surfing your own boards. Thanks for sharing your craft! Really enjoyed it.

[@hassy_3481]

That surfboard looks good👍How cool❗

[@danvargo8225]

Just found your channel and so glad I did. Awesome techniques that are different then most of the others on the Tube. Especially pumped to try the tail patch. My last two boards I did by cutting the bottom sheet and draping the top before lam’ing. The came out decent, 2nd was definitely better, but had to work the pin lines to make it more symmetrical. Pumped to try your technique. Awesome content, awesome board 🤙

[@Shrednaught]

Thanks man 🤘 Yeh the taped up tail patch trick is good if you want a different colour patch to the clear board. It does add a step but it also makes it super tidy as you just cut it along your tape line and then proceed with the bottom lam. Good luck on the next one and any questions just hit me up 🤙

[@jrdill1631]

YEWWWW!!! Looks great, mate! Thanks for the video!

[@Shrednaught]

🤘🤘

[@simonleisersohn1368]

hi mate! i´m a huge fan!! I´m shaping since 2016.. started with shaper studios guys and now im doing it for my own on my garage.. thanks for your all videos and tips!!! big hugs from the cold shore of Chile.

[@Shrednaught]

Good stuff mate! Right back at ya from bloody hot Australia 😅

[@leahbrettt]

Great job!! Awesome to watch someone so passionate.

[@Shrednaught]

Thanks mate 🤙

[@MegaSeth100]

thinking of making a wood board, so thanks for the content. very enlightening!

[@Shrednaught]

Good luck mate. They’re another level of craftsmanship 🤙

[@angeloalves9039]

Great video, awesome work!! 🤙🏾🤙🏾

[@Shrednaught]

Thanks mate 🤙

[@jrsurfboardslongbeachnewyo3563]

Awesome. Sick board and always cool to see everyone’s method to making boards. Keep up the work. Yewwwwwwwww

[@Shrednaught]

Thanks mate 🤙

[@lionandcub]

Great vids brother. Watching them all. Love ya work.

[@Shrednaught]

Thanks mate 🍻

[@onerevolversurfboards-bz2kp]

Great video and awesome work! We need more videos! I reference your channels videos ALL the time!

[@Shrednaught]

Thanks mate 🤘 I’ll get some more videos done eventually 😅

[@boogiebros2387]

So sick man your board is so clean!

[@Shrednaught]

Yew! Thanks dude 🤙

[@HoStevie]

awesome build 👍

[@Shrednaught]

Cheers mate 🤙

[@skipponica]

Amazing video! Please keep on doing these great contents! 🔝

[@Shrednaught]

Thanks 🤙

[@skellingtonGl]

wow! great Work!

[@JimiJo]

You deserve my subscription and so much more. I’d love to construct my own board!

[@Shrednaught]

Thanks! You should do it. There is a wealth of information to help first time board builders online. 🤙

[@T0picVal0ur871]

Love your channel and everything about it, recently I have been wanting to get into shaping I was wondering if you could do a video shaping with minimal tools so I could see and follow it. Thanks

[@adbg8660]

Hey there ! Nice vid man, like all the others as well. Juste to let you know you should Sand dry worh 240 grit and then 400 grit dry and finaly 400 grit with water. Try it. 🤟

[@laboratoriomusicaotico]

so nice! recently the algorithm presented me to your vids, pretty relaxing! People sometimes come talk to me and say "bro, I know this shaper dude who makes a new surfboard really cheap". I never buy this conversation, specially when seeing the process is very artistic, unique and takes a lot of time and careful hands to do it so... lots of sanding as well! hahah

[@Shrednaught]

Good isn’t cheap and cheap isn’t good. Haha too much sanding man. Glad you enjoyed the vid 🤙

[@lorenzoarfeli8361]

Love it!

[@Joe-yr1em]

Solid job 💯

[@Shrednaught]

Thanks 🤙

[@santeloan8741]

Thanks for your help ! It's very interesting 🔥

[@Shrednaught]

No problem!

[@mag6287]

another killer board impressive stuff ////////// its a process thats for sure ////////// cool to watch

[@Shrednaught]

Thanks mate. It’s definitely a process that’s for sure. Thanks for watching 🤙

[@fer689]

Hard and nice work dude, congrats!!

[@Shrednaught]

Thanks man 🤘

[@jonathanorebaugh6884]

Great videos!

[@Shrednaught]

Thanks man 🤙

[@Cetrifuga1945]

Sei bravo ci metti della passione ❤️‍🔥 e precisione complimenti 👍

[@JS-rp7qb]

Not a shaper, but have built quite a few glass boats. Might want to consider adding a thickener when using resin as a glue. Doesn’t have much mechanical strength as resin, but adding cabosil or milled cotton or any adjunct gives it crazy strength properties.

[@Shrednaught]

Thanks for the advice mate. Boats are such a pain to glass. My only concern with this idea is that surfboards need to keep their flex and although impact strength can be a good thing, too much stiffness kills a board. Weight also comes into the equation. Most surfers these days like their boards lighter. For these problems we’re using surfboard specific resins and fibreglass designed to keep the weight down , flex optimal and help the board maintain its “whiteness” 🤘

[@keatingcustomsurfboards185]

Great video.

[@Shrednaught]

Thanks 🤙

[@CodyMadewell]

This was amazing!! Keep up the good work! Your boards are sick af

[@Shrednaught]

Thanks dude 🤘

[@CodyMadewell]

Definitely trying to become a board shaper now

[@Shrednaught]

@@CodyMadewell make sure you learn to glass and sand as well. These are definitely the most sought after skills in the industry at the moment. Let me know if you need any advice. Yew! 🤙

[@CodyMadewell]

@@Shrednaught thanks dude!!

[@mcdance1311]

man that thing looks fun!

[@Shrednaught]

I’ve only surfed it once so far. In massive/wild conditions and it felt good. Was on my backhand too.. Just waiting for some good days here to give to a proper whirl 🤞🏻

[@mcdance1311]

Wahoo! That tail with a thruster set just looks interesting to me. I haven’t surfed anything like that. And I’m a sucker for colored rails. Have fun!!

[@johnkovacs2388]

Enjoy what your doing, It’s good to see the ins and outs of what generally goes on in a bay. I learnt somethings so cheers Bro, I’ve subscribed and you’ve encouraging me to get back into shaping, but it’ll have to wait as I’m on a yacht. Loving the sub zeros of Tassy . I reckon you captured a lot of what shaping is about with out the scoobs and long necks

[@Shrednaught]

Thanks mate appreciate it. Enjoy the yacht.I know I’d prefer that over a shaping bay any day 🤙

[@ryanlowe988]

Very cool 😎🤙🏼

[@Shrednaught]

Thanks mate 🤙

[@TheStaySeven]

find you like a week ago, I have watched all your videos

[@carlomedina3512]

This is great. What do you use for a sealer coat?

[@kevintyrer45]

That's a great design. I'd love to do it being surfed. Been shaping my boards for 4 yrs now. I'm about to do a high performance board (frk fire wire look alike) for 5-8ft + Supers jbay waves. This was very motivational. Tks

[@Shrednaught]

Good stuff mate. HP boards can be some of the most challenging styles. I have a video coming up where I shape myself a HP quad shortboard. 🤙

[@kevintyrer45]

@@Shrednaught that's great, I can't wait for it. I've never filmed my process. I'm going to do that this time. Possibly I can share it with you.

[@denismasterkov]

Молодец паренëк! Спасибо!!!

[@asce2273]

Really good bro.

[@Shrednaught]

Thanks dude 🤙

[@cfirgu]

Amazed ! 🤍🤍😱😱🤍🤍🤟

[@Shrednaught]

Yew!

[@cfirgu]

@@Shrednaught do you shipping to israel ?

[@Shrednaught]

Sorry no

[@michaeldill7620]

Nice work! Hey curious have you ever used epoxy paint for your final coat? Been plying with that over the top of poly boards with good results. How did she surf?? 🤩🏄🏿‍♀️Be well. Get waves!!🙉

[@elijahleopoynton-whiting6578]

Nice! Where did you get your concave sanding block?

[@yeahno1413]

Did you choose 6oz (as opposed to 4oz) because the board has no stringer? It was crazy how much the blank flexxed when you were cutting the rail bands. Really well done.

[@alfie.a5285]

So satisfying

[@Shrednaught]

Yew!

[@frakafrocka]

ty for vid. what brand/type of roller did you use for that epoxy sealer coat at the end? was it a foam roller or a cloth roller? thks.

[@paulcooper8441]

I love your videos. Thanks for posting. Did you invent/make your concave sander? I've never seen them for sale or really anyone else use them.

[@Shrednaught]

Thanks mate. I have made these but the one in the video is a store bought one. If you check out some online surfboard supply shops you should be able to find one 🤙

[@andrewmercado60]

Sick board. What was that black sanding tool you used after planing the concave?

[@Shrednaught]

Thanks dude. It’s a concave / convex sanding block. Can set the concave on it and get everything nice and even

[@suzukiton]

awesome vid bro thanks. whats the final clear coat, another layer of resin or somethign else?

[@Shrednaught]

Thanks mate. It’s a final coat of clear acrylic sealer.

[@ciwanicha]

you shred the naughty with these boards...great job! what type of pen do you use to write on the finished board? acrylic paint pen?

[@Shrednaught]

🤣 I try.. thanks dude I used posca paint pens. They won’t bleed under sealer or resin as long as they are completely dry.

[@eburnate]

Awesome. Noticed that you laminate before putting in the fin boxes. Is there an advantage in doing so? Can you do the same with futures?

[@Shrednaught]

The reason I do a post lam instal with the futures boxes is because it is a tint on the bottom. Sometimes if you do it pre lam you can’t see and air bubbles around the fin boxes and when you sand them open they open up and look ugly. If it was a clear board I would install pre lam and under glass like normal

[@nathanstanmore4002]

Great vid very helpful. When you put the logo in between the sheets of fibreglass was that just a paper logo or some kind of special material?

[@Shrednaught]

The logo is printed onto a rice paper. My logos have been printed by a surfboard specific printing company but you can print them yourself at home with a home printer 🤙

[@cooperdrewitt5547]

Hey man, love the videos. Was just wondering what type of sealer you used as the last step. Cheers

[@Shrednaught]

It’s a clear acrylic flooring sealer

[@marccefalu9741]

Bro! So sick. Keep up the hard work! Just wondering when youre sanding with the Mirka, which is a sweet sander btw, is it RPM adjustable? I use a sander/buffer and the sandpaper discs say to not go over 2800rpm.....I'm only doing poly currently and PU foam. I noticed in another comment you said EPS can be sanded straight up....is that because of the epoxy resin or the EPS foam? And is epoxy resin more sandable than polyester resin? SOrry for all the questions....continual learning approach for me.

[@Shrednaught]

Thanks man. Yeh the mirka is adjustable rpm. You’ll see me sanding rail with it and that’s because I drop it down to hardly any spin. Epoxy resin is sandable once cured. Poly resin is sandable after the fill coat with wax otherwise it stays tacky to allow for the next layer to chemically bond. If epoxy is fully cured it needs to be roughed to get a mechanical bond. Poly is generally easier to sand after the fill coat but epoxy is sandable without a fill coat so it’s kinda different Hope that helps 🤙

[@sizzleslider4334]

You make this look to easy brother haha, I've just started my first blank.

[@Shrednaught]

Cheers haha. It all takes time man. Just follow the steps and try your best not to rush! Yew 🤙

[@Mitchlittleacademy]

Mate! Watched from start to finish. What a craft you have. Amped me up for my Fiji trip in 3 weeks time. Where are you located? Mitch

[@Shrednaught]

You should be amped to go to Fiji! I’m in Western Australia. Perth at the moment

[@guzman3924]

After the epoxy lamination, do I need to scuff it for better mechanical bonding with the hot coat? Great job!!!

[@Shrednaught]

It depends on how long you leave it. If you get to do the hot coat basically as soon as it’s hard enough to flip ~12hrs then most cases no. Just proceed as normal. If you had to leave the epoxy for a while and came back to it say after a week or two then I’d give it a light scuff. This is using surfboard specific epoxy resin.

[@gabegabbert4615]

Hey man loving the videos great work! Glad to see a free lap What did you use for the rolled on finish (clear) coat? Greetings from california

[@Shrednaught]

Thanks mate 🤙 The finish roll on is just concrete sealer. Doesn’t fill pin holes but it does provide a super slick finish

[@tomb4291]

@@Shrednaught hey mate, what exact product do you use? There are a fair few options in bunnings- dont want to apply the wrong one. As always-thanks for the videos and replies, really appreciate it.

[@Shrednaught]

Think it’s called “ crommelum” or something like that. Spelling is probably wrong.

[@rustymac83]

I really enjoy these videos, they really show the craftsmanship and attention to detail that goes into a custom surfboard. I am guessing that the EPS blank that the board is made from is a generic bought in piece? If as you shape the EPS core of the board you found a void or air bubble in the core would that make it unusable or is the strength coming from the fiberglass and resin?

[@Shrednaught]

Thanks mate. These eps foam blanks are a super high density and as of yet I haven’t had one that has had a void. Having said that, voids or small bubbles are not rare in poly blanks and they don’t detract from the strength of the board. If they were large enough to not fill then they would be sent back to the supplier. The strength in the boards comes from the glass and resin 🤙

[@rustymac83]

@@Shrednaught cheers for the detailed response, really insightful.

[@Shrednaught]

@@rustymac83 anytime 🤙

[@michalkaderabek1720]

From what material is the logo you always put beneath the cloth?

[@lalaboards]

I m still looking for a pair of those pants !!!!!!!

[@daviddaniels1461]

Thanks for sharing. From what I can see you are using epoxy from Keyline composites. Do you find that it goes "blotchy" when you do a tint. It sort of looks a bit blotchy in the video but maybe it all comes out in the end?

[@Shrednaught]

Yeh mate I’m using keyline epoxy. And honestly it’s one of the best epoxies I’ve used. The blotchy look I think you’re talking about comes from the eps beads. Resin tint with eps is a hard one to achieve consistency. I don’t seal my boards as it doesn’t worry me but if I wanted a super consistent colour I’d probably seal the eps blank and do a spray before laminate 🤙

[@joegreen9827]

killer video do you tape fins to set? what is the sander your'e using?type of pad on sander? thanks

[@Shrednaught]

Thanks mate. Yeh tape fins and the sander I use mostly is a mirka deros 5. It has a vacuum attachment which I need as I do f have a dedicated sanding bay. The other is just a stock polisher/sander combo with 4inch hard pad from local hardware

[@rainstall2254]

Sick board mate. I’m gonna install my first finboxes on a few handshapes(only done fixed fins prior), and was wondering if you’d recommend doing it before or after lam? Honestly cant figure out what difference it makes.. It’ll be future boxes! Thanks!!

[@Shrednaught]

Generally a pre or post lam install is mostly because of tint. When you do a dark resin tint you can’t see the air around the boxes and then if you leave bubbles and sand them open your nice tint looks a bit ragged around the boxes where the air bubbles opened up. If it’s clear then doing it straight into the foam is the way to go

[@rainstall2254]

@@Shrednaught cheers!!

[@alexanderschuit5340]

very nice. was the final sealer a concrete sealer?

[@Shrednaught]

Cheers mate. Yup that’s the one 👌

[@heliomarjunior4546]

hello, first of all thanks for such important tips, i saw that you use a dust collector in your machines, i'm having great difficulty finding this flexible tube to connect the planer, could you tell me where you found it to buy, what i use is very rigid and ends up getting in the way when shaping. Thank you very much for your attention.

[@Shrednaught]

I bought it from shaper supply online. It was the only place I could find one and the postage killed me but it’s worth it 🤙

[@melman142]

Thanks for the great vid! I am busy with my board in my spare time which is not enough! So I have a delay of maybe a week or 2 between glassing and seal coat. Do you think that would be a problem. Do you think I should sand the whole board to help it bond?

[@Shrednaught]

Is the board poly or epoxy? Either way you will be fine but if it is epoxy you will need to scuff up the glass with 80grit to get a mechanical bond. Poly should be ok

[@melman142]

@@Shrednaught Yes it is epoxy. Probably going to be 8 days break. Will give it a bit of a sand. Thanks🙏

[@john2097]

Great video thanks for sharing. Half way through sanding you apply a sealer coat. Is this another coat of epoxy resin or do you use something else ? Really like the ideal of applying a thin, sealer coat and fine sanding after. Great technique 👍

[@Shrednaught]

It’s an acrylic sealer. I’ll do a full video on it soon I think as it’s the most common question I seem to be getting asked. 🤙

[@john2097]

@@Shrednaught thank you

[@lior_ch123chen5]

Hey man, really love the video and your work. I also really love the outline of the board, I'm going to build a new board next week... i can ask were you get your template? Thanks

[@Shrednaught]

Thanks man. This board was a template from blending curves. Awesome amount of templates on there. I did change the tail shape though. Or you can download the ishape app. A real easy to use app to make templates. Yew! Good luck

[@lior_ch123chen5]

@@Shrednaught thanks

[@user-qj7dg7gr2p]

Hello. very interesting to watch your work. Please tell me what kind of finishing varnish do you use? alkyd, polyurethane for yachts and flooring or two-component acrylic lacquer for car? thanks.

[@Shrednaught]

Thanks mate. Flooring 👍

[@selwynrowe378]

That board looks sick! I really like the free lap look!!! I've been wondering about an EPS blank but thought stringerless would need more laminanations? I also thought they needed vents? Is that only as they get bigger? I'd read so much about how much more hassle EPS is than PU I'd talked myself out of it, but from your tutorial it doesn't look too bad to sand?

[@Shrednaught]

Thanks! I do my stringerless eps with 6+6/6 glass so they’re really strong. The benefit is it also adds some weight to reduce the chatter that light eps boards can get. I’ve never used a vent but I don’t leave them in a hot car. Not too sure about air travel. Eps can be more of a challenge to get a clean finish on the foam as the beads are large compared to traditional PU. But it’s not in any way bad, it’s just different. As far as sanding, if you find the right epoxy it’s as easy as poly. I just start with 80grit on epoxy. Both epoxy and poly have their pros and cons .. I could almost write a book. 🤣

[@selwynrowe378]

@@Shrednaught Maybe you should!

[@selwynrowe378]

Hey have you done a Mini Simmons before? Would that be a board you'd recommend for a novice (2nd board)? Or actually, what would you recommend as an easy (er) board?

[@Shrednaught]

@@selwynrowe378 I have done mini Simmons. One of my next videos is a build of a Simmons. As a second board I would suggest something like an egg shape board. Mini Simmons seem easy but they do have a lot going on in a small package. Keep it simple and go with a nice flowing outline, flat bottom and simple fin set up and it’ll be sick. 🤙

[@selwynrowe378]

@@Shrednaught Oh awesome, I'll look forward to that one! I might tackle a refinement of a 70's Single Fin that I love as a project then? Keep up the good work they're awesome videos!

[@Avevalentine]

great job man! have you seal by reson?

[@Shrednaught]

Thanks 🤘 The final seal coat is just a concrete sealer. Not for filling pinholes just for providing a slick finish 🤙

[@6to6surf4]

Awesome work! what router bit did you use for the leash plug?

[@Shrednaught]

It’s just a straight shank. But it’s about 4inchs long. I got it from eBay. I run the shank without the cutting edge along my 3mm mdf template and it cuts so perfect and square. As long as your template is perfect, your board outline will be too 🤙

[@6to6surf4]

@@Shrednaught Thanks!

[@cullenhallbelmont]

how many boards could you make in a week?

[@trustnuffin9121]

Serious Skills ❤‍🩹

[@giulianobelsito1142]

What is the sealer coat made of? Iam from argentina

[@user-ff6hd7rh9k]

What are you doing with all these boards

[@jackcathcart6931]

How do you get your laps to wet out so nicely with epoxy? I always have trouble getting them to fully saturate

[@Shrednaught]

You have to make sure epoxy isn’t cold because that makes it thicker. Apart from that it’s just making sure you use enough resin to get a good wet out. 🤙

[@timdale4047]

How many sealer coats do you use? Do you sand it any lower than 320 and do you have to wet sand or is dry sand(as shown) enough?

[@Shrednaught]

If my laminate is perfect and sanding on point normally only one ( on a sanded finish board ), but I also do a acrylic sealer as well. I will stop at 320 for sanded finish. It depends on the quality of finish you’re chasing as to whether you go higher and wet rub. For personal boards I don’t bother, but for a purchased board I’ll wet rub.

[@freeman61312]

Hey man love the craftsmanship you put into these. I haven't seen anyone else roll on that last sealer coat, what goes into that?

[@Shrednaught]

Acrylic floor sealer. Just gives it a nice matte silky finish.

[@freeman61312]

@@Shrednaught Huh no shit, wouldn't have ever guessed! I think I'll give it a try on my next board

[@Shrednaught]

Yeh man it works really well. Use a foam roller and lay it out super flat with no drips. Let it dry and give it a once over with 320 grit to get the dust zits out and it’s super slick.

[@daviddaniels1461]

@@Shrednaught can you please share the brand of acrylic sealer and where to buy. I use spray on in an aerosol but I like the roll on idea. Kind regards david.

[@rodrigonavarro2332]

Great board dude! that coloured free lap looks sick. is you final seal coat epoxy? I see you dont even tape the fin boxes.

[@Shrednaught]

Thanks man. The final seal coat is a clear acrylic. It doesn’t run too much and is pretty east to clean up if it does get into the boxes but I’ve honestly never had that problem

[@rodrigonavarro2332]

@@Shrednaught Thanks for the reply dude! when you say clear acrylic you mean something like lacquer? Cheers

[@Shrednaught]

Yeh man.

[@thomasaiken5518]

hey I was just wondering what foam your using and where i would be abled to purchase some as i'm interested in making a board

[@Shrednaught]

In this video I was using eps foam. But I use both eps and pu It depends where you are located. Just do a quick google search for surfboard building supply’s and it should come up with a few places close to your location

[@jeffsauers17]

Any tips on getting a solid single color using epoxy?

[@Shrednaught]

Epoxy can be difficult to get nice consistent colouring. You can seal the blank to fill in any voids and use an epoxy specific tint. Or seal and spray with a eps friendly paint.

[@hamishboully6553]

Hey mate do you just use normal paper for the logos cheers - ham

[@Shrednaught]

Gotta use rice paper mate 🤙

[@stephenbrown664]

Hi Shrednaught.. Just wondering if you are using a short cotton nap or sponge to roll on your sealer? Thank you

[@Shrednaught]

Foam. Cotton drops all the pieces Into the sealer

[@stephenbrown664]

@@Shrednaught Thank you. I did use a cotton first.. And that's exactly what happened. Fell into the sealer.. The sealer is an excellent alternative to spraying.. So a big thank you for sharing your technique.

[@Shrednaught]

All good mate. Just make sure you get the higher density foam/ better quality ones. Good luck 🤙

[@dozingdreamflock3310]

Is that EPS? Do you fill it with anything before lam?

[@Shrednaught]

Yup eps foam. I don’t fill my eps before lamination. I use a high density foam and try get it as clean as possible. When glassing I always glass on falling temps and baby sit the board in case of any off gassing. 9 times outta 10 it’s all good.

[@davel4708]

Am I right in saying that you used 450 ml of resin for your fill coat each side (900 ml in total)? Seems like quite a bit to me.

[@samuelreinhart3061]

how are you placing the logo? material that you printed on and how are you centering? it seems like you just place it, which is impressive.

[@samuelreinhart3061]

Should have also said great videos thank you for making them.

[@Shrednaught]

The material is a special rice paper from a print shop. You can use normal rice paper but it’s just slightly thicker. I have a couple of small letters I centre off and although there isn’t a stringer there is a glue line I used to get it straight on board.

[@jacobclark89]

I need advice installing a bow eye in a epoxy foam raven paddle board. I plan to pull it behind a electric recumbent bicycle , with a yeti cooler and some ice and drinks on top while towing, I plan to have two bicycle wheels at the back. I have 4 tie points up front but need a tie point at the very front and it has to be strong. My plan is to either drill a horizontal hole large enough to glue a piece of carbon fiber tube with like a 6" set back from the tip from side to side of the board or drill a long hole at the bow to glue in a stainless eye bolt. Can someone please give me some suggestions please. Thanks

[@dipole_project]

Hi. Please tell me, by what means do you cover the board at the very end? Is it varnish?

[@Shrednaught]

Yeh mate, it’s a clear acrylic sealer. Just roll it on and give it a light sand with high grit and it’s good to go

[@joeblow1942]

20:41. 1) Is that just epoxy you’re rolling on as the sealer coat? 2) What kind of roller pad are you using?

[@Shrednaught]

Clear acrylic sealer. foam roller from hardware store. Super cheap and easy to find

[@joeblow1942]

@@Shrednaught Thank you!

[@wesklol]

hey man, after using all of these paths , and layers of 6 onz , how goes the weight ? just to know cuz im using only one layer 6 onz. nice video keep going!

[@Shrednaught]

Thanks man. The overall weight is about same as a standard poly of same size. I live and surf in Margaret river and the swell and conditions are usually large and raw, so a super light eps board would only work in the cleaner days here. The additional weight is actually a huge help with keeping the rail engaged. Where abouts are you located/surfing?

[@wesklol]

@@Shrednaught thanks for answer, maybe thats is the key, the eps, i was thinking about the poly , cuz on my last board i used 6+4/4 onz, and it feels a little heavy (6'3" fish +-42liters), im on canary islands(spain close to africa )

[@Shrednaught]

@@wesklol yeh poly does have a slight bit more weight than stringerless eps. You could try a 4/4 lay up on the deck. But this will reduce durability slightly

[@calvinhills162]

What blanks do you use to shape

[@Shrednaught]

Burford blanks 90% of the time

[@declankarney]

when did u start shaping boards

[@Shrednaught]

Around 2012 was my first one. But I haven’t been shaping non stop since. It’s more of a passion hobby 🤙

[@thefoildesigner]

Interesting technique with the sealer coat! Are you using the same resin as the one used for the hotcoat? EDIT: My bad you answer that question below already. Please do a video about it soon ;-)

[@Shrednaught]

🤘

[@thefoildesigner]

@@Shrednaught can you share the brand of the sealer in the meantime please?

[@Shrednaught]

It’s a concrete sealer. If you’re in Australia I’ll give ya the brand. If not you might need to find something similar located in your neck of the woods.

[@thefoildesigner]

@@Shrednaught thanks! I did a quick search and concrete sealer indeed came up as an option. Do you use this to primarily protect Posca and paint jobs or as secondary hot coat no matter the finish? Also how is the bond with epoxy?

[@Shrednaught]

I use it to protect posca and give the board a nicer overall finish. It hides minor scratches etc: The board will still need to be final sanded proper and completely sealed as this doesn’t seal pinholes. The bond with epoxy is fine. Works with poly as well. It’s just a different form of acrylic. Always do a test before committing to a full board.

[@juliancronin1679]

Over all how long did this take?

[@Shrednaught]

Hard question to answer as there is a lot of time between resin curing. I’ll say a week start to finish. But not concentrating 100% on this board

[@derpyKAT229]

whats an ep block