Shrink Plastic for Beginners: Coloring, Cutting, Shrinking, and Sealing

!Here are some updates regarding shrink plastic.....
YOU CAN USE CRAFT ACRLIC PAINT AS LONG AS YOU APPLY IT IN A THIN LAYER. USE A DENSE SPONGE TO DAB IT ON THE PLASTIC.
Instead of modpodge you can also use acrylic sealer spray. If you used sharpie or alcohol based ink, use the Krylon Kamar Spray and for other colorants, use acrylic sealer spray. Always test a piece out before spraying it on your project.
You can also use acrylic spray sealer to seal your plastic before the resin to increase adhesion. BUT make sure test it first to see if it’s compatible with the colorants you used.
How to Print on Shrink Plastic: • How to Print on Shrink...
Buy me a cup of "resin" to help me support this channel: ko-fi.com/amymade
Instagram: @amymade.Ig
Tiktok: @amy_made
[e-mail]
My Shop: www.emiialchemii.com
***I bake my shrink plastic on a parchment paper, Or with aluminum foil under the parchment paper. I don’t use baking pan because it can heat up too quickly and can be a source of direct contact heat. Shrink plastic shrinks more evenly with hot air. I also bake one piece at a time so I have more control. The shrink plastic I'm using by Grafix, the baking temperature range is 300-350 and I bake mine around 320. If you find your plastic yellowing after baking or shrinking unevenly, try lowering the temperature. It's always best to bake a test piece so you know what temperature to set at.
*can you use a microwave to bake the plastic? No you can’t! It will only work if you have a microwave that has a convection oven function.
*** PLEASE MAKE SURE THE SEALER YOU USE IS COMPATIBLE WITH THE COLORANTS YOU USED. USUALLY BUT NOT ALWAYS, IF YOU USED WATER BASED COLORANTS, USE OIL BASED SEALERS. IF YOU USED OIL BASED COLORANTS USE WATER BASED SEALERS. LIKE I SAID THIS IS NOT ALWAYS THE CASE SO MAKE SURE TO DO A TEST PIECE BEFORE YOU ACTUALLY APPLY TO YOUR FINAL PROJECT!
Here's an interesting read about shrink plastics:
Science of Shrinks Dinks: www.smithsonianmag.com/scienc...
How Shrinky Dinks Work: entertainment.howstuffworks.c...
IMPORTANT NOTICE: Please ALWAYS use resin with proper precautions including wearing proper PPEs (glove, mask, respirator etc) AND working in a well ventilated space. I recommend getting a hold of the SDS (Safety Data Sheet) info that every resin company has available to the public (by law). This has all the info about the resin you are using including the precautions you need to take and first aid care. Watch my resin safety video for more info: • RESIN SAFETY | Importa...
*Shrink Plastic I use (affiliate link) : www.amazon.com/gp/product/B00... (This is glossy: they do carry frosted/matte variety. I only have the gloss kind so I had to sand the surface with 320 Grit sandpaper to frost it)
*Posca markers:
amzn.to/3olwebg
amzn.to/3rAe4EY
*Colored pencils: amzn.to/3psLr9U
Resin I use: affiliate links are marked with *
-*Liquid diamond casting resin: www.theepoxyresinstore.com/co... code for 20% off : CRAFTERSDELIGHTS20)
-Faux Rizzle Noveau coating resin: artresinfauxrizzle.com
-UV-LED resin:www.emiialchemii.com/product/...
Why do I use two different types of resin in my projects?
I use a casting resin to cast and a doming resin for doming.
Casting resin is usually low in viscosity and works very well in molds without much issue with the bubbles. Also the low viscosity will allow the resin to reach detailed area of the mold. Doming resin is thick in viscosity and holds its shape very nicely. It creates a full dome and tends to hold the surface tension much better than low viscosity resin. So lower risk of the resin dripping off the sides. It also gives the piece a smooth, flawless finish.
Videos for Resin Beginners:
Part 1 • Everything You Need to...
Part 2 • How to Measure and Mix...
Part 3 • How to Dome with Resin...
How to Fill and Seal Shaker Charms: • How to Seal & Fill Liq...
Disco Sting by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/...
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/

[@AmyMade]

FAQ: Q: can you use a microwave to shrink the plastic? A: I never tried it and probably never will but I’m going to assume no. Since microwave has hot spots and doesn’t heat evenly. But let me know if it does or not! Q: Can I use nail top coat to seal it? A: You can but remember some colorants will smudge or bleed when nail polish is applied. For example sharpie marker will dissolve with nail top coat.

[@adventureswitheva28]

@Ευα my name is Eva lol

[@The.classicshow]

You can. I tried it and it works well

[@jiminsinvisiblejams5993]

I got the shrink plastic from dollerama

[@talibmadhany8554]

AmyMade Do you have to use number 6 plastic cause I don't have please reply

[@tiktoksmallbusiness2560]

@@talibmadhany8554 no it doesnt have to be number 6 but it might not shrink evenly. Actually i make a lot of my keychains with the plastic from food packaging you buy at the store. Most are number 6. Specially at the premade food counter.

[@ChazoAnwah]

I wish this was old school youtube. This video needs a 5 star rating. A thumbs up isn't enough

[@AmyMade]

Thank you so much!

[@magickaldust1213]

Underrated comment

[@harshanahar]

Was there a 5 star option in KZbin????? I got phone in 2018 And I'm the first person of my family to have a phone with internet so i don't know and I'm amazed that i don't heard about it

[@benjaminmaldonado560]

@@harshanahar I think you got KZbin 10 year late for that

[@inkleef]

I’ve been browsing on KZbin since 2007 and I don’t remember this at all

[@YuyoYung]

This is the BEST most comprehensive shrink plastic tutorial I've seen! THANK YOUUU!!!

[@rendaowe]

IKR? Finally someone tells you all the things you need to know without having to watch 30 video’s. BTW, each type has their own recommended oven times.

[@candigates8999]

Totally agree. Thank you so much

[@nicolekennedy6841]

I agree!

[@WonderfullyMade_Lex]

💯 For sure.

[@meYogii_]

Agree! So detailed and easy to follow.

[@CoolRiceBunnies]

Okay you just blew my mind with shrinking the plastic with a heat gun

[@AmyMade]

was that supposed to be a pun?? lol >_

[@CoolRiceBunnies]

AmyMade I’m flattered you think I’m that clever, but let’s just go with yes... yes it was 😉

[@jonfia1108]

Can we use hairdryer? Its hot too

[@AmyMade]

I’ve seen ppl use it but very inconsistent result with distorted pieces

[@RachelAtFoodiesVegetarian]

...I just assumed it would be a heat gun honestly, heat guns are used in a variety of art pieces

[@jericodawsonmarcos7529]

this tutorial is the GOAT just cause she considered using clear coat

[@islandgirl967891]

Just when I think I know a craft, you make a video tutorial and all of a sudden, I feel like a newbie all over again. Even though I've made quite a few shrinky dinks with my little one, I still learned quite a few things from your video. Thank you so much for the high quality video content. I'm always striving to improve on my crafting skills. I love that you're thorough, well spoken, and so awesomely talented with every craft you touch.

[@AmyMade]

islandgirls thank you!

[@mehchocolate1257]

@@AmyMade ars those hard to make?

[@mariatortilla7133]

I am a Graphic Design teacher at a High School, for Christmas I made each of my 2nd & 3rd year students pins of their favorite self-made in class designs! Thank you for the tips, suggestions and detail. This was an extremely informative and helpful video. I wish I watched this before I began my process, it would have saved me a lot of struggles.

[@PatriotMilitaryMom]

Teach the teacher! I love it!

[@aMYusername]

Beginning to think about how useful this would be for dollhouse miniatures.

[@valerieviola903]

I’m currently building a resin business. & I’m so fascinated with shrink plastic process but never thought I’d do it. But after seeing your tutorial. I wanna try it out! This is by far the best tutorial I’ve ever seen on anything! So informative and covers all bases!

[@yukariyukari1334]

4:53 onwards is really helpful, I thought the reason why my projects look elongated was because of our oven

[@DL-ir2wb]

thank God someone who uses protection for their hands and nose when handling their crafts!! Bravo!

[@karenflemming3067]

I used that 50yrs ago, when I was in High School. I’ll have to give it a try again.

[@MrsKramper]

I can't get over how incredibly knowledgeable you are Amy! Also one of the BEST tutorials I've ever watched, on ANY subject. Lovely voice, direct and to the point, TONS of information, without any crazy off topic chatter or loud, distracting music. Subscribed, thank you for this tutorial!

[@AmyMade]

Thank you for the encouraging comment! 😍

[@UsernameBarbF]

Oh. My. Gosh! You have taught me sooooo much! Never in a million years would I have thought to paint the back of my melted piece to make the coloring more vivid but I'll be doing that tomorrow! In fact, I found your video while looking for white Shrinky Dink to see if that would solve my problem--I'm so glad I found YOUR video instead!! I'm also kicking myself for having tossed all my PS06 plastic containers in the recycling bin 2 weeks ago (I'd been saving them for use in cardmaking and decided that I had far too many on hand). Thank you so very much for taking your time to teach us through your video--and thank you for such great video work (great lighting, great focus, etc.)

[@AmyMade]

Thank you so much! I’m so glad it was helpful!

[@natwooding]

Incredible video! Everything was so clear and understandable and makes me want to try this now. 😊

[@genesisjessome4722]

I have been playing with shrink plastic for years and I learned so much from THIS tutorial! Some things I knew the how, but not the why. Thank you for the best Shrink Plastic 101, you just improved my artwork a ton!

[@Adude12]

The most detailed tutorial on shrink plastic I’ve ever seen! Ty for the help 😇

[@bibruce7434]

This video has the most clear and useful notes and tips on shrinky dinks! Thank you so much for making this!

[@sandradaniel5562]

This is one of the best tutorials on shrink plastic. Thank you for explaining so well.

[@theyoutubeanalyst3731]

Making a ruler with the shrinking plastic is such a GENIUS idea

[@iekika79]

Thank you for this tutorial!! I just ordered my shrink plastic. Can’t wait to test it out!! ❤️

[@ethanbotte8356]

Your video honestly gave such good advice. The coloring, cutting, and sizing of my pins are so much better than what they used to be. Thank you!

[@MacMcCaskill]

Excellent tutorial. Clear explanations and calming voiceover.

[@created2bless322]

Earrings for sure!!! Key chains, dangles for journals.

[@sandraordaz5641]

I think this is the BEST tutorial I have yet to see!! I wish I would have seen it months ago before wasting so much money on trial and error. Thank you Amy!!!!

[@rendaowe]

I love how you went into everything that could happen and why. There are soo many tips in this video that are very helpful. They you! You told me everything I needed to know. Great job 👍🏼😻

[@stljh6833]

The BEST informational video I have ever seen for shrink plastic. THANK YOU!!!!! You answered all my questions!

[@jolievuu]

You really know what you’re doing in the video. Very thoughtful and informative!

[@tanyavaldez7706]

This is one of the best tutorials for anything that I’ve ever seen and most definitely the best for shrink plastic! Thank you so much.

[@tanyavaldez7706]

This has to be the BEST tutorial I have found! I have messed up so many projects. Thank you so much for this!

[@chichi514]

I don't know if anyone's told you this but your voice is so soothing 😌 Thanks for such an informative tutorial!

[@IGotADroneYay]

Resin dome over shrink plastic looks AMAZING. Galaxy-level crafting right there.

[@TheWillOfJ]

This was spectacular! I appreciate the detail and visual references, and all of tips makes shrink plastic feel much more approachable. Thank you for the video;

[@nicolaskent399]

This has been amazingly helpful, I've never used shrink plastic before but I'd been wanting to design some charms lately. Thanks you so much for the comprehensive guide, this is a fantastic resource for the craft!

[@racheljones6702]

I have looked at many shrink plastic tutorials and none explain as well as you do and your have quality looking products. Thank you for sharing.

[@gingerpana6859]

Thank you! This is the best shrink plastic tutorial/tips on shrink plastic I saw! Thank you for sharing!

[@manuelvillalpando6665]

Excellent work! Explained thoroughly and very easy for all to understand. I would add to everyone, as a safety precaution, to try and get a dedicated oven to and for your crafting. Having had several college courses on Plastics and Composites Technology, I would warn everyone to please be very aware of the types of materials that you are using. Plastics and composites are extremely fun and if you practice the right Personal Protective Equipment (PPE’s) it can keep you and your loved ones safe from perhaps some toxicities that are found on some materials. Also, if possible, try and use your dedicated oven outside your living space, again, just as a safety measure. Again, great job with this video!😊

[@Gwenobbie]

This was such a complete and thorough tutorial! Thank you!

[@insidethemirrorstudio]

This is the clearest and most helpful shrink plastic video ever!

[@handmadedorset]

I was about to film a shrink plastic tutorial because there were so many gaps in others I’d seen - but now I don’t need to, you’ve covered it all! 😁

[@tiffanie8]

omg these characters bring back so many memories

[@lxix_lxix]

I've been scouring the web for DAYS to find info on sealing shrinkydinks. Thank you so much!

[@sophiaisabella8701]

This was the best tutorial ever

[@hxh57]

your channel is so inspiring! There's not much of these materials available in my area :(....but continue your work u are an inspiration for many ppl!

[@katherinenoggle6407]

These are really great tips! Thanks for sharing them- i bought a whole pack of cheap shrink plastic already sanded/SCRATCHED, and thought I'd wasted my money. Now i can just sand them smooth. And great coloring ideas too! My niece grew up with the Little Miss and Mister characters, i think I'll make her a key chain. Thanks again!!!

[@AmyMade]

Just make sure you’re still using a 320 grit sandpaper. Anything higher than 400 will make the plastic too smooth and color pencils won’t stick.

[@rochellapitan3585]

😡😠🤬😡😠🤬😡😠🤬😡😠🤬😡😠🤬😡😠🤬

[@twicen777]

Massive THANK YOU for creating this thorough and inspiring video tutorial.

[@SALshaNoma]

Thank you for all the tips. Figuring out the size was my biggest concern and why I never looked into this more. I love the ruler idea. That makes so much sense.

[@vablackbelt]

OMG! I HAVEN'T EVEN WATCHED THE VIDEO AND IM ALREADY EXCITED!

[@vablackbelt]

Great tips! Thank you!

[@NemoCat20]

This was an amazing tutorial! Thank you! I have had some shrink plastic for a while, but was unsure how best to use it. You gave some great ideas and tips. Thank you! 😊😊

[@chelsieroslyn3317]

I am absolutely obsessed with your videos. Thankyou for being so precise and fool proof!

[@AmyMade]

Chelsie Roslyn thank you for watching!

[@chelsieroslyn3317]

@@AmyMade I'm slowly making my way through them all, I'm gonna try to replicate the night before christmas one 😍

[@Whole-Milk]

You’re so kind to share all of this info with us! Thank you so much 🥰

[@herzen9857]

I've been interested in using shrink plastic and im really considering buying some so this was super helpful! There's quite some stuff in here i didn't know about

[@IncubusGirl06]

This was wonderfully informative. I've only messed with the shrinky dink set i bought twice, with the first batch coming out better than the last. I will def be using a lot of these tips to make them better!

[@ivycdraws]

Omg wow. This is the best of the best shrink plastic videos ive ever seen. Thank you thank you thank you!!!

[@sheelemizuhara2168]

I just accidentally clicked this video and I have absolutely no idea about shrinking plastics like that. Very informative!

[@tempbamboo]

Thank you! That was so informative, I’m really excited to play with the shrink plastic I bought.💖🥰

[@AmyMade]

Bewitched Fae yay!

[@oDeepBlueSea]

this is put together very well, i think you also just helped me identify a mistake i made with my first few tries that deterred me from trying again! take a comment for the algorythm :)

[@acolley2891]

I am an experienced crafter and yet, your tips were extremely helpful.

[@baetoulk5888]

This is an AMAZING video, you shared everything someone would need to know and so clearly!! Thank you so much

[@user-it4gp6yt1s]

I really learned a lot from this video!!! Some of the tips are so important (and clever) which I have never seen in other shrink plastic videos! Thank you so much for making this!

[@teenytinylifeco476]

I’m definitely going to use this to make tiny surfboards for my dad’s hot wheels collectibles. 😁

[@mominajalal7569]

Best shrink plastic tutorial,very informative

[@Magpie2497]

Excellent tutorial! I really learned a lot from watching this. Now I'm ready to use some of those handy tips for my own projects!

[@Prairie_Gypsy]

In place of using posca markers, ohuhu is an excellent, money saving alternative. I’ve used them on memorial pieces and they are great!!!! They also last longer.

[@AkilahOsa]

I love shrink plastic charms! 😆 I've even made a few of my own with the disposable plastic containers, because this art material is heard to find 😅. I learned a lot of new techniques from this video so I will definitely be trying again, so thanks for sharing. 😁

[@dowarnette]

Thanks so much for going over the basics. Now another craft to add to my list of stuff to try.

[@eevagirl]

This video meant nothing to me till I actually tested my own and made me pay attention the second time. So thank you (:

[@musicsexlove]

This is absolutely the most comprehensive video I've seen! Been looking for a while and nothing as informative as this, THANK YOU!!! And can you do a video using all the sealers you listed with the various types of ways to color? (IE: polycrylic on permanent markers, colored pencils, paint pens, pastels; resin on permanent markers, colored pencils, paint pens, pastels) etc... I've tried embossing before and it was a complete failure 😂

[@AmyMade]

hmmmm....im not sure if that's possible for me to that at this point. Sounds a bit pricey tbh lol Especially since I don't have most of the sealers mentioned in the video. But definitely would like to try some of them some day. Thanks for watching!

[@musicsexlove]

@@AmyMade thank you for responding!

[@ThisOLmaan]

Thank you Any for all the tips, the quality of the shrink sheets, and the colors to use on certain types that's all good news for me👍🏼😁

[@valentinamontei1930]

Di tutti i tutorial che ho guardato devo dire che la tua professionalità è nettamente superiore... Complimenti 😊

[@zzsiyingzz]

Thanks for the informative tutorial! I still have trouble with sealing even though I do use mod podge before the uv resin. Still peels off after a while (in my shakers for eg). Do you dome both sides if you've drawn/coloured on both sides of the plastic?

[@AmyMade]

I haven’t had any issues with the resin peeling off so far. I do prefer using the super gloss modpodge over traditional ones. I also make sure the mod podge is completely dry. And yes I do seal and dome both sides

[@reolisticjelim6857]

me: let's make this! brain: yes! Oven: you dont have me. me: * cries*

[@cosmicfrillsradio]

ive seen people use a heat gun

[@QueenOf98596]

I got a toaster oven from a second hand store for this and other craft baking. I have used the heat gun method as well, it's fine just have to manage heat from the gun and your hands :)

[@reolisticjelim6857]

@@QueenOf98596 damn a heat gun? (What what's a heat gun? Is it a hair dryer-)

[@truckerdave8465]

@@reolisticjelim6857 a heat gun gets hotter than a hair dryer and blows less air but you can try! I second the toaster oven, works so well. Also I’ve seen people use flat irons.

[@reolisticjelim6857]

@@truckerdave8465 ooh flat irons! The one you use to iron the shirt right?how long does it takes

[@monicabohn2476]

Growing up I made shrinky dinks from store bought kits and, feeling nostalgic, had looked up vintage shrinky dinks commercial. This video came up in my suggested videos on the side while watching that video and I am so glad it did! I can't wait to try making little charms or key chains or who knows what! This tutorial doesn't race through everything so fast I can't keep up, I love that everything is explained clearly and products are shown so I'm not cluelessly going to buy a ton of stuff I don't need or the wrong stuff. I love that you show many samples of things you've made and showed actual coloring you were doing. And it didn't hurt that I love cats and I also got stupid excited about the BT21 characters you were working on, lol. Thank you and I can't wait to check out more of your videos after I post this!

[@KnitOutTheJams]

What a comprehensive video. Thank you!

[@JeonJungkook-nk2xc]

I liked this video....when i saw BT21 characters....i am a big fan of BTS💜

[@noone91]

Army!!!! 💜

[@avishiktabiswas5583]

why is there something related to BTS💙💙💙 WHEREVER I GO

[@itssoha4221]

Yes

[@Robin-chan]

Because of cookies :D

[@IsAblee28]

YES YES YESSSSSSSS

[@noone91]

Lol same army 💜 💜

[@noemielamoll4921]

this is the best tutorial on shrink plastic I've seen! You cover every possible question I may have and your explanation is easily understood for someone who never worked with this before. Thank you so much!!

[@xTofuAngel]

Your videos are always so relaxing and enjoyable to watch! What a great way to start my morning 🌞❤

[@AmyMade]

Christina Le 😊hehe thank you!

[@jerrysnape3]

I've watch around 5 tutorials about shrink plastic and yours is my favourite!! Such a great work!! ❤❤

[@AmyMade]

Thank you,!

[@JM-eg5kn]

Thank you Amy for sharing this video. It really helped beginner like me who's into shrink plastic. I wish you great success and thank you again! ❤️

[@LMK1019]

You did such a great job at explaining all the important details. Thank you 💕😁

[@tatitheoverlord]

Hands down best guide. Thank you

[@shannon-mareehealy9300]

This is the type of tutorial I look for everytime great video!!

[@leahvigs]

okay i watched this for one specific part at the end (sealing) but EVERYTHING in this whole video is so informative and helpful, thank you so much!! you’re very good at thoroughly explaining in an easy and understandable way, especially for beginners lol thank you!!!

[@artsbydebi]

Amazingly complete info…..!❤🎉

[@edolieyu2112]

Thank you so much for this! I was a bit curious on how shrink plastic works and you answered most of my questions in one video. The extra links in the description were also super helpful! You're really amazing :D

[@julz1694]

woah this is the best shrinky dinky guide!! probaly the only you have to see to get started nicely

[@WakkasLove]

Best video on this subject yet!!

[@prempremglamourz1]

Wow, this tutorial is super handy. I have never use shrink plastic before but I’m about to make a project on keycap using the shrink plastic and watching this video has given me the idea 💡 and confidence to go ahead with the project - will try and tag you to the project when done with it. Thanks very much for sharing 👍🏽

[@Vinaluv]

Thank you for sharing your talents with us 💘

[@shaneyofcourse]

So incredibly helpful! Thank you for sharing these great tips! 💖💖💖

[@ruwgirl]

Wow, so much important information in one video, thanks so much 💐💖

[@chloehazle2726]

This is such a helpful video. Thank you so much for all of the time and thought that you put into it. It's much appreciated! 🌸💕🌸

[@sourkiwi935]

Your gloves are so beautiful. This video is one of the best I've watched about shrink plastic thanks for such good info 👍

[@beadinggem]

Excellent! Literally everything one needs to know! Thank you. I will share on my blog later on so others can come learn from you!

[@xxami5964]

this is by far the best and most informative video ive watched. keep up the great work dude

[@NatrahAmir-wh8py]

The best video for beginners. It's so easy to understand ❤

[@samanthabahde9690]

Thank you!! did not want to do a ton of research, I’m halfway through the video and all of my questions have been answered 😁

[@sp1cyn00dl3s]

i don't think i can stress how awesome this tutorial is 🫶🏻🫶🏻

[@TheGeorgia2437]

Informational tutorial. I have never done this and will try with take-out plastic. Thank you.