Siemens Logo PLC MENU / Options

[@Jsr735]

Good explanation Sir

[@VishalKumar-pz4xg]

Thanks for your support

[@kichukrishnadas5415]

Start and program options not shown ....what may be the issue??

[@harshadhashiq7991]

Sir, please tell me how to reset the logo same as you show

[@cssbv3538]

Thanks a lot!!!!

[@Jsr735]

Sir I have same logo as u have Problem Is that start stop option is not coming what to do

[@StableAutomation]

Check if you have logged in with password.

[@johnkaaria7855]

How to go about Alarms displayed? Have any idea?

[@StableAutomation]

do you require to configure alarm or check internal diagnostics message?

[@sahilrawat9072]

how to increase running hours of generator in plc

[@StableAutomation]

You need to create a logic using timer.

[@sirajammunira4648]

I have a question: Can Siemens LOGO be interfaced with Weintek CMT-SVR-100?

[@StableAutomation]

can be communicated over Modbus TCP. (as new logo plc can be configured as Modbus TCP server - kzbin.info/www/bejne/mZK1XoSFn86UjpI)

[@SmartComputerTMOsminAltamirano]

is it works with sensors

[@StableAutomation]

What type of sensor you want to use ?

[@SmartComputerTMOsminAltamirano]

@@StableAutomation ultrasonic .

[@StableAutomation]

@@SmartComputerTMOsminAltamirano either you can directly connect with PLC ( 0-10V) or you can use expansion module AM2 (for 4-20 ma)

[@SmartComputerTMOsminAltamirano]

@@StableAutomation is that I want to put a counter with ultrasonic or approximate sensors in arduino to install it at the outlet of a had to come out rice. so keep the sensor activated by varying its work then culcular like this: 10 working minutes are: answer how many movements the sensor registered but in 10 minutes it fills 10 quitales if the sensor registers 10 quitales as 12000 times that I pass that serial value this way I want to calculate it some idea

[@sumavi4732]

Good

[@pratiksinhrajput2837]

How to copy program and transfer to another plc