Siemens NX Tutorial | Title block template

B3D-1 | Siemens NX 2206 Tutorial Drafting | This video shows how to create, design, automate and change your own drawing frame, with title block and logo. And how to save it as a template.
The video was recorded in NX 2206, but the drafting tools (zeigen) have been available since NX10 and have changed little in subsequent versions. So even with an older version of NX you can build your own automatic drafting frame following this tutorial.
Automatically? Yes, because all you have to do is click on your template and you can create the first view. The title block automatically reads out the attributes of the part. Scale, number of sheets, sheet size, projection are also automatically entered and updated.
In other words: you save a lot of time, the frame looks professional and contains all the prescribed entries. In 16 small steps you get all the necessary information for your perfect drawing frame. The finished frame is also available for download.
▬about this channel▬▬▬▬▬▬▬
With LearnNX you will learn Siemens NX step-by-step from the beginning. The basic course consists of learning videos that build on each other. (marked blue)
You start here: • Siemens NX Tutorial | ...
In between you can check your knowledge with tests. (marked green)
Expert exercises impart special knowledge. (marked red)
All learning videos are available for free. We look forward to your comments on KZbin. (and about your subscription ;-)
/ @learnnx
▬about our free learning platform▬▬
😃 All tutorials, clearly arranged, can be found here: learnnx.com
Learning videos with a short description, together with the exercise materials as download.
You can also search 🔎 for commands or topics.
And all according to the motto: step by step / for free / for all 🎈
▬Links▬▬▬▬▬▬▬▬▬▬▬▬▬
Drawing frame and Drawing system attributes
learnnx.com/downloads
▬chapter▬▬▬▬▬▬▬▬▬▬▬▬
00:00:00 Foreword
00:01:08 Step 1: Create sheet
00:02:17 Step 2: Borders and zones
00:05:02 Step 3: Folding marks
00:06:23 Step 4: Plan title block
00:07:48 Step 5: create and position spreadsheet
00:09:35 Step 6: adjust sizes of the spreadsheet
00:13:18 Step 7: adjusting the spreadsheet texts
00:16:43 Step 8: create title block
00:17:56 Step 9: automate title block
00:19:56 Step 10: projections angle
00:22:08 Step 11: attributes in the drawing
00:24:40 Step 12: add logo
00:30:41 Step 13: attributes in part
00:35:21 Step 14: save as template
00:40:10 Step 15: work with the new drawing frame
00:46:09 Step 16: notes for the admins
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► visit us on learnnx.com

[@abhishekprajapati2875]

Best tutorial i have ever seen deeply explanation 🎉🎉

[@PaulMajephat]

Exactly all I needed. The best I have encountered. Good work.

[@learnNX]

I was already worried whether it was too long. Who wants to watch a 50-minute video on YT today?

[@user-ym6iw3hk4t]

Great video. Appreciating your hard work. Expecting videos for other modules too.

[@akshaysharma3835]

IMPORTANT TUTORIAL FOR DRAFTING

[@LofEtmaz]

WoW WoW , very very completely. Thanks lot.

[@learnNX]

Thanks for the nice comment!

[@Freidenker8]

to step 6: as you select fonts to use you need to restart NX to be able to select them thx for the video!

[@learnNX]

Yes of course, settings in the customer defaults are only applied after restarting NX.

[@samirarad9362]

Thank you very much, good luck.

[@learnNX]

Thank you, Samira!

[@RussellHaghgoo]

thank you very much. It is so useful and complete . Will you teach NX CAM ?

[@learnNX]

Hi Russell, it needs to be complete to understand all the relationships. First comes the drawing course, then freeform or sheet metal. I will send out a survey to the subscribers.

[@Stocjon1985]

Great!

[@learnNX]

Thanks for watching.

[@МОЙ_ДРУГ]

i like it

[@arniko2762]

Thank you very much for the clear and complete tutorial. Can the template be used when the drawing is created embedded in the master model .prt file? (3D and DWG in the same file)?

[@learnNX]

Yes, do all steps as shown, but without the prefix (DB_DWG_TEMPLATE_). Then create a model and switch to the application drafting. Here NX ask for a template (entry at the top: Use Template) You will find the learnNX template in the list.

[@arniko2762]

@@learnNX Thank you very much for the promt response. Plus change the cell for the drawing number in the title block from to , right?

[@learnNX]

@@arniko2762 right!

[@PaoloGallo69]

I think I follow all the instructions step by step, but at least I don't see the new format listed under the drawing tab; does it work for NX1899?

[@learnNX]

Hello Paolo, yes, this has worked since NX 10 and later. Check all the steps again.

[@wg1159]

At Step 3 you show the creation of folding marks for an A3 size sheet. How can we make this sketch in such a way that is creates the fold marks for all sheet sizes from A3 to A0 in the correct positions?

[@learnNX]

I don't think it's necessary. I have always folded all sizes with these folding marks. I start at the title block and zigzag fold every 190 mm. Then the second last fold follows to the left-hand edge of the sheet with a distance of 210 mm and the last fold in between.

[@samirarad9362]

Hi An error appears at 38:13: "This file already exists, and you do not have permission to update it." I do not know what is wrong with it. I cannot save it as a template.

[@learnNX]

Hi Samira, try to save it in an other folder, or change the pax-file with the editor. See 39:08

[@user-wk3ow9xl2n]

HOW DID YOU OPEN drawing system attributes.txt FILE?

[@learnNX]

With the "Editor" in Windows

[@JayPatel-mg8dm]

I have question can we use this template in opened part like its necessary to create new drg file i mean with ctrl+shift+D can we add this template in that So we dont need to make new file is this possible? ❤

[@learnNX]

Yes and No. Press Ctrl+Shift+D and select Standard Size and A3 as the sheet size. Then click on File, Import, Part, OK and select the drawing frame. Correct the sheet size. Now you will see the drawing frame, but the automatic filling is broken. You have to fill it in manually by double-clicking. And my recommendation is: work with a separate file for the drawing.

[@JayPatel-mg8dm]

@@learnNX thanks buddy 🙏👍

[@JayPatel-mg8dm]

@@learnNX I tried this method but came on issue pax file updated successfully I've cross verify it by opening template pax file but it didnt appear in drawing template 🥲

[@timl7935]

38:08 The file already exists and you don't have the rights to update it. Don't understand...SOLVED : READ ONLY file...

[@learnNX]

Repeat the step 14. You need admin rights! Otherwise, copy the folder "template" to a folder to which you have write access. Then follow step 16

[@timl7935]

@@learnNX Thank you !