Brilliant iv been a RC modeler for 40 years built from plans all my modeling life. And built 4 cubs and I still fly a 140" span cub to this day with a flat twin. love your ATTITUDE to our great hobby for real RC aircraft. Not the on line BOX JOBS. WELL DONE AND ALL THE BEST . THANK YOU FOR SHARING YOUR EXPERIENCES WITH US.
@wildgoobsid54 жыл бұрын
That was one of the most satisfying maiden flight videos I have ever seen. Pilot not standing in the middle of the runway! Beautiful landing. Nice. Need a call sign on that fuse . Very nice mate. Cheers! ( I too am sick of everyone trying to make money on you tube)
@bennietipton28204 жыл бұрын
That turned out awesome and I want to thank you for not putting adds in I hate them as well good job 👍
@RussianThunderrr11 ай бұрын
This is one good looking SiG Cub, or how German would say - Good & Tight!
@paultravis75803 жыл бұрын
Beautiful job covering. But a cub just ain’t a cub with out fabric covering but that just me. Great job and nice flying.
@GRW34 жыл бұрын
Beautiful field. This flight gives me impetus to get back to my 1/4 CWC rebuild.
@DavesRc4 жыл бұрын
Looking super nice. Very nice cover job. I need to grab me a high wing plane of some sort. I definitely love this one. Colors are perfect. Love blue.
@p3arljam264 жыл бұрын
Nice job as usual keep us updated.
@sammysouth83728 ай бұрын
Sounds so pretty 😊
@robertcovell27874 жыл бұрын
MY MY MY what a sweetheart! I been waiting for this. Gorgeous
@frankienv39063 жыл бұрын
Great Job on the build 👍
@jimg1634 жыл бұрын
Covid cub, lol, at least a good thing that happened in 2020, looks fantastic! Great job!!
@n1114v4 жыл бұрын
Flies great! Waiting for a new carb for the DLE 30 so I can really have fun with it.
@helischorsch97864 жыл бұрын
Seems to fly as it’s built...great job and your covering is just awesome 👏👍👍
@howardwilliams25874 жыл бұрын
Beautiful job and it looks like it will fly well. Thanks for sharing.
@skepticalbill26444 жыл бұрын
Looks gorgeous...!!! Great job...!!!
@harmsworthcharles32614 жыл бұрын
Hello from france I had a 20 DLE with WALBRO carburetter These are originaly made for chainsaw machines etc With full throttle or idle ,so at mid throttle the engine juste can t run nicely It sucks a little on low speed gas arrival and a little on high speed gas arrival, wich males mid throttle incertain . Your plane is MAGNIFIQUE Bravo
@vulcan1064 жыл бұрын
Really sharp looking Cub Andy. I hope to see it fly in person yet this year.
@SomeGuyInSandy4 жыл бұрын
Nice to see it airborne! I hope the breakup in the engine is something simple. I am looking forward to seeing you put on a show with it at the fly-in's next year!
@n1114v4 жыл бұрын
Just had the carburetor torn apart in the shop and can't find anything wrong, hopefully it'll work itself out
@SomeGuyInSandy4 жыл бұрын
@@n1114v I'm not an expert with those engines, but from the sound of it, and the intermediate burbling, it sounds like a fuel delivery problem. Good luck finding it. I had a similar problem with a weed eater. Once I replaced the carb, it ran great.
@jcb67134 жыл бұрын
Beautiful build ! ...
@johnwronski1394 жыл бұрын
Nice work Andrew!
@DonDegidio4 жыл бұрын
Hi Andrew, The Cub looks great. You had an awesome maiden and even greased the landing. Can it get any better? You and the family have a Happy Labor Day and stay safe.
@n1114v4 жыл бұрын
Thanks Don, you as well
@daleyahnke72159 ай бұрын
Thats a real beauty!
@n1114v9 ай бұрын
My best work
@ThePlainNsimple Жыл бұрын
beautiful airplane!
@stevecoggins25914 жыл бұрын
Awesome plane man.
@n1114v4 жыл бұрын
Thanks bud!
@ChrisStephen-oq5zf Жыл бұрын
Fantastic
@seancassidy1174 жыл бұрын
Good job looks nice
@n1114v4 жыл бұрын
Thanks bud!
@jimr36334 жыл бұрын
Watchet the covering how to and nice to see it fly. Once u are comfortable would like to see some low slow fly bys and touch and goes to show off that amazing color scheme. Please post the solution to the engine issue. Infernal combustion engines are my nemesis.
@n1114v4 жыл бұрын
I just had the carburetor apart and couldn't find anything wrong. Hopefully it works itself out.
@CharlieBrown-pb9xn4 жыл бұрын
Sounds like loading up at part throttle.
@carlosfern1708 Жыл бұрын
Beautiful job man God bless
@robinsareolas4 жыл бұрын
Beautiful
@sjanninck4 жыл бұрын
Congratulations Andrew! She is a bute
@n1114v4 жыл бұрын
Thanks steve!
@dalerbsr.50614 жыл бұрын
Nice !
@RC-Flight Жыл бұрын
Very nice airplane and flight! What is your wing length now after clipping? I have a 1/4 scale cub with a 26cc and am contemplating a clipped wing.
@n1114v Жыл бұрын
86 or 88 inch depending on rib spacing
@matthewmcdonnell90452 жыл бұрын
I also have a old DLE 30 that also makes the pulsating idle. Did you ever figure out the issue? Where should I start. I do have the NGK plug and noticed it was not kept properly it will be my next attempt. What did you find if anything to fix it
@n1114v2 жыл бұрын
I sold the plane but the issue was the carb getting to much heat from the exhaust
@matthewmcdonnell90452 жыл бұрын
@@n1114v hey Andrew sorry I reposted the same question I’m new to this KZbin stuff and I just saw your Reply. I did not think about too much heat I guess it is possible. However my DLE 30 Is mounted on a ultra stick the hanger 9. 80 inch but with the exact same issues you definitely could be right. I’ll still get the ignition because mine does show a lot of use in it. And I will definitely inspect the distance between my fuel line and pit style muffler. Again I love your videos to keep your interest. And I am also a huge fan of the chipmunk. Back in the day I had the Ohio RC Pepsi chipmunk as well as of course a Carl Goldberg chipmunk. I still have the Ohio RC plans and I’ve been tempted to enlarge them and possibly scratch build one but time will tail. Thanks again love the videos
@georgevprochazka53163 жыл бұрын
I saw your vid on the white stripes (wing), but would love to see also the "seamless tail" covering vid. Can you post a link pls ? Thanks
@n1114v3 жыл бұрын
I did a video on how I did the seamless tail during the construction of the airplane.
@georgevprochazka53163 жыл бұрын
@@n1114v can you post a link to it PLS ? Thanks
@n1114v3 жыл бұрын
@@georgevprochazka5316 just go to my channel. The video is titled SIG 1/4 clipped wing cub update!
@matthewmcdonnell90452 жыл бұрын
HELP!!!!!!!! Hi Andy I’m a huge fan of your videos I am new getting back into RC and we seem to have similar issues or did. I picked up a usedDLE 30 that seems to have the same issues you had with your cub. I also cleaned the carburetor and mess with the settings without any luck. I have a new ignition system on order I should receive it November 10, 2021. How did you fix your issue? My engine is gurgling the way yours did it in your video and also would pulsate. I’ve clean the carburetor put in a new fuel tank and next will be the ignition. Help! Did you fix yours?
@son2tube4 жыл бұрын
nice plane, really
@harmsworthcharles32614 жыл бұрын
This magnifique plane needs a four stroke SAITO FLAT TWIN gas engine👍👍👍👍👍👍
@n1114v4 жыл бұрын
I'd love to if someone would give me one!
@harmsworthcharles32614 жыл бұрын
@@n1114v santa claus 🎅🎅🎅🎅
@rnrbear1 Жыл бұрын
How was the balance with the servos in the tail? Building one now with a DLE 35. Pretty much same setup
@n1114v Жыл бұрын
I never balanced it...... she flew perfect with little trim needed