Sig P365 field strip!

[@spanky174]

I'm I the only one who looks for the shortest to the point videos on how to disassemble and reassemble a gun just like this one? Thank's for getting to it.

[@nolanriley9865]

Me to

[@BSZTEX]

Me three

[@Theupstateidiots]

Yeah I'm not sure how people make a two hour video on a 20 piece gun. Lol.

[@1timmeh]

Litterally why I clicked into this one over the 7 minute one below it.

[@partyjesus5588]

There ain't much time to waste if a 17yo "friend" just told you he bought a 9mm and you wanna know how to disassemble every possible gun he could've bought Teenagers be tripping nowadays

[@Get2cPIX]

Excellent explanation of basic SIg P365 field strip. Clear video. Uncluttered backdrop. Good lighting. Calm narrator voice.

[@andypeterson8013]

.......and no music.

[@joeylandry4933]

I love the simplicity of the Sigs.

[@mu2freighter]

Nice and straightforward, I like it! I'm quite disabled, in a power wheelchair with only one hand working, but even so I can still safely field strip a P229...and this looks even easier. Now, it does take me forever to load a magazine one-handed, and I couldn't do that at all without the UPLULA tool, but I count on SIG's extraordinary reliability combined with a larger capacity magazine to see me through an unfortunate encounter without any failure to feed or jams. The P365 is definitely on my want list as a great small alternative to full size service pistols, thank you for confirming my hunch that it'd be just that! By the way, my biggest worry after I became disabled was in shooting a service caliber gun one-handed, but that was assuaged a few years ago when I found I could safely and accurately shoot .357 Magnum through my SP101 for hours without any difficulty. It was so comfortable even I was surprised, but it did much to build confidence in my new and admittedly lessened ability. I found it comparable to the .40 S&W I have experience with, if not a wee bit snappier, and I'm looking forward to step up to the .357 SIG without any undue concern. Hey, I might be disabled, but I absolutely _refuse_ to be an easy target for predators Incidentally, I carried a SIG P239 for years prior to becoming disabled and practiced one-hand and weak-hand with it on every trip to the range, so as luck would have it, I was prepared to a degree for my later condition. As SIG fans would expect, it never gave one bit of trouble with firing and feeding all manner of loads, including hollowpoints, in all the years I owned and shot it. Love them SIGs!

[@jaybeckerich4900]

Glenn Horowitz love the story Glenn! Stay in the fight!

[@ericadolphson7276]

You inspire me! I am disabled as well. I refuse to be a easy mark as well. Some of the most effective agents in both world wars and the cold war were disabled in some fashion. FDR is one of the best examples of this. Best of luck.

[@robertgaudet7407]

Keep on trucking. We need you around.

[@harumaru9609]

Your resilience and sheer willpower shows you are a model survivor, an example for everyone who's experienced unexpected disability. Amazing.

[@bputneyPHOTOart]

We'll done Sir!!

[@kirkdog4788]

Glad you did a review on this. I picked one up today and couldn’t for the life of me figure out how to get the barrel to slide back in place because the takedown lever swung back in the 3 o’clock position and wouldn’t turn down. It turns out I needed to push the slide lock up as I turned the lever to the 6 o’clock position.

[@jaybeckerich4900]

Haha, yes that scared me when it first happened to me!

[@justindfaircloth]

Ha! Me too. Thanks for this.

[@fastlaneed2238]

OMG this! Thank you so much for saying something

[@ElderGuy729]

Had the same issue! I knew there had to be a trick to it... Thanks

[@user-ci9ng7uu4i]

Just spent the last 10 minutes freaking out that I broke mine. Thanks!

[@joeward1529]

Carried a Sig p228 for years as a cop....Loved that gun as did so many of my peers on the job. Just ordered the p365, and picking it up next week. Looking forward to it

[@OpiumMonkey]

how are you enjoying it? I've had mine for about 2weeks and I can't tell if I prefer it to over my 43x or not

[@bradpearson2628]

loved this video; thanks so much for posting. you're still helping out us amatures 6 years later!

[@IdahoGunGuy]

Thanks sir - we just picked up the one with the manual safety - so far so good

[@mv-eg1wt]

Clear video and audio...excellent lighting. I needed this!

[@triguyw3304]

Thanks. I was getting frustrated on how to get the slide back on the frame.

[@jaybeckerich4900]

You're welcome!

[@jamesrivera6068]

Great video. Right to the point. No BS. Just show how it's done. 👏🏽

[@JR-xs2ec]

I always had the semi automatic pistols whole collection of them from the old browning to the 1911 colt. But I have never seen so much Firepower On such a small semi automatic pistol… I'm really really really impressed and needless to say extremely reliable… Great job Sig

[@bradbrown9722]

It’s nice that most Sigs field drip in the same method! Great vid bro. Short and precise. I’m subscribing. Happy New Year my friend

[@justsomeguy3931]

Good demonstration, thanks for being clear and quick

[@bbqbourbonandbullets6869]

Good breakdown video simplistic to the point and touching all of the major points great job. I love my P365 and it's nice to get a refresher

[@alcalu]

Good tutorial, Jay. Much appreciated for taking the time to upload this.

[@loganpondbridge]

I picked up mine today. Thank you for this video, it was a big help!

[@robteaster2446]

Great, clear, easy to follow, to the point video.

[@mattchew9950]

Thank you for getting straight to the point sir. Appreciate your videos

[@mattbiel]

Thanks was having trouble reassembling. your video is clear and to the point.

[@davemoyer505]

Good basic video- thanx. Have had mine since they came out. An awesome piece. NO firing problems and have shot it lots! My favorite carry gun, and I have a few. Love this little gun👍👍👍🇺🇸❤️

[@davephilpott4543]

Thanks for the quick and to the point vid. Thats what i wanted

[@lestercoons3962]

Totally awesome! I just picked mine up today! It has a manual safety and tritium night sights...AND it is optics ready too! Better than I anticipated! I can't wait to take it to the range...maybe next week! Thanks for the informative video! :-)

[@ACommenterOnYouTube]

Just picked mine up TODAY. That slide release is VERY tight and very HARD to push down to release the slide.

[@mikebumgarner4122]

Thanks for this. Simple and straight forward. Great job!

[@ScottyKMusic]

Very nice. Straight to the point. Thanks for your help

[@kyleraltenhoff8758]

Just bought a 365 and this is great help!!

[@ProvidedByJRW]

Thanks Jay. Was looking for some pin that needed pulling.

[@bltefft]

Great video. So much easier (for me, at least) than my Glock 19. I bought my Sig P365 a few days ago and want to clean and lube it before I shoot it for the first time.

[@xXsirmattusXx]

Great video bro! Short and sweet ! Thanks my man!

[@johndoe-xn9ys]

Just bought one today love it so far, going to carry it off duty.

[@wm.courtney9114]

Video very well done & simple!

[@retroextent795]

Ty for the video sir, I might be 6 years late but it was needed!

[@jhawk1985]

Just picked this gun up 2 days ago ! Already looking at custom barrell's and triggers. I love the sights that come on it. Gotta make it mine with a few custom touches

[@mmpatriot2170]

Great how to video. You made it easy for me to clean “Baby Thor”. Thanks! 👍

[@SeanConnoly]

I am a Glock guy but have made the switch, so maybe I am a Sig guy but the video was straight forward and easy. Thank you.

[@youtube8775]

Quick, easy & informative. Subscribed. Thanks!

[@sohoyankee66]

Love your quick to the point vid.

[@robjohnson8522]

I got one for Christmas! Going out for first time today! I am excited!

[@the-thane]

Just in case anyone has the same problem that I had: if you move the takedown lever to the 6:30 position, but you can't get the slide catch to release the slide, then you need to push the slide catch up while pushing the takedown lever further clockwise. That's what fixed it for me

[@austinhuggins1582]

I have a Shield and I got this for my wife. Would recommend both!

[@steverussell6642]

O ya

[@nathanhale280]

Thanks for the information. I just bought this gun and wasn't sure how to break it down.

[@kacieerb1990]

Anyone ever have any issues with the takedown lever? Took the magazine out, locked the slide back, it’s clear…can’t get the lever in the 6 o clock position. Tried so hard and it only gets to the 4-5….won’t go any further.

[@darylnd]

Same here. I finally got it, but then it didn’t want to return on reassembly. That sorted itself out, as well. Maybe it just needs a bit of break-in.

[@guillermodiablo1342]

Gotta hit the slide release at the same time. Not for you, two years later lol, but anyone else who has

[@MrJoshcc600]

I can't get the side lever down. Gun mashed a kiwi in my camping pack and everything is stuck

[@BryanBowden]

Thank you! Simple to the point! Subscribed.

[@katrinayoung1]

Thanks, I just cleaned it for the first time.

[@justinroland3923]

Yes I ordered mine should be getting tomorrow I hope and the fact I don't gotta pull the trigger I love that

[@bputneyPHOTOart]

Thanks for the quick field strip, my lock mechanism is a bit tough to slide the top fwd. anyone else having that issue?

[@giavanti0003]

Well done vid. No filler, I came here for 1 purpose.

[@humbertofustes1211]

Wonderful! Straight to the point.

[@stabebetini]

Thank you this was very helpful !!!

[@jasonmason2060]

Perfect, thanks Jay. Right to the point!

[@ericcotter8933]

Sweet and to the point, I was wondering if the slide release pin pulls out like my p226, but your vid cleared that up, or I would have been at it for a couple hours. That Al Gore invented “innernet “ is a wonderful thing!

[@danmagana7838]

spring rod is similar to the g42 and the take down is just like the h&k vp series . good vid. 👍 👍

[@carlkocon888]

Very informative without a lot of useless chatter. Thanks.

[@youngrevival9715]

The lever you have to lock down if you have it disassembled and push it up by accident then you just put the slide lock back up and you can move the back down

[@mattr7229]

Just what I needed... thanks!

[@tomasbarbot]

Thanks for the video. No red dot?

[@kevinclause4p55p5]

Great video. I'd call it 6 o'clock and 15 mins.

[@jeremiahsweeton]

Breaks down like the beretta, I haven't shot mine yet, thanks for the video

[@2bituser569]

Should you dry fire 🔥 without a snap cap in the chamber? My P365 Rose came with 5 dummy rounds for dry fire 🔥 practice.

[@Mephistopheles019]

Just like the H&K VP9. Thanks for the video

[@gregmorgan4840]

I shot mine the day after I got it handles real good recoil was a tad more than I expected but overall I love it

[@inthelandofmorethansmall7582]

I cant get the lever to stay at 6:00 Edit: my safety was on Had to take safety off for side lever to stay at 6

[@kclloyd6687]

Thanks for getting to pint not bsing for 5 mins on field strip

[@Po1itica11yNcorrect]

Followed the direction and disassembled it without any issues. Problem I'm having is getting the lever back to the 6 o'clock with the slide off. It goes to about 4 o'clock and won't budge another mm. Any secrets?

[@JBerz]

Push the slide lock lever up.

[@kwik2hear915]

Push slide release UP^

[@inthelandofmorethansmall7582]

Why do yall move the lever at all ? Once you've put it at 6:00, removed slide, etc... What's the purpose of moving it again before you're done putting slide back on? Real question... I really wanna know. Thanks in advance!

[@BryanBowden]

🚨FYI - when you reinsert the spring, the yellow goes to the back of the barrel.🚨

[@patscott4787]

Thanks for the quick field strip

[@patsythompson3815]

Uh yeah, mine super hard to load ammo and can't do what it doing. Looks super easy and still can't get upper off. It's not even budging.

[@kevCarrico]

great, concise video - thank you!

[@NittyGritty420]

Aesthetically striker fire handguns don’t normally appeal to me. But the p365 is so damn attractive.

[@mdjak3686]

Thank you. Short and to the Point. Subbed.

[@gatedancer17]

Short and. sweet. Thanks. Got one today.

[@sstjacques]

i had to pull the trigger to reset, then lock back, before moving lever to 6pm position. Trying to move lever without doing this, it was impossibly to move it down.

[@Godfirst1292]

Is it ready to shoot as is (idk wat in asking but asking anyway) or have to push the small button above and behind the trigger?

[@inthelandofmorethansmall7582]

I need help How do I get the slide back on? I've got it back on the gun but I cant get it to lock back so I can disengage (or reingage?) the side lever Nvmd I got it. You have to push the slide ALL THE WAY BACK to push up the slide lock.

[@kdw75]

I bought this last month to replace my XD-40 that I have been carrying every day since 2004. I am pocket carrying this one in an Alien Shapeshift holster. Unbelievably light for what it is. If it had the back strap safety like the XD, it would be perfect.

[@lauraday3163]

Thank you for showing the functions check! So many videos forget that's an essential step!

[@Matt-xv2cp]

Easy peasy. Short and sweet.

[@kyleschroder9045]

This turned something alien to me into "huh... that was easy."

[@joshodom5115]

I no im late but I just got mine today and it shots very well for a small handgun

[@byronray9785]

Another good video thanks again for the info

[@inthelandofmorethansmall7582]

EXCELLENT VIDEO! THANK YOU!!!

[@mikeconnole815]

Clear and concise. Thanks

[@freshoxygen2176]

To the point. Thanks!

[@josel.ubinas7029]

Nice video just to the point. I have a situation and the video make me resolve it. No necessity to do 15 min video for something that you did in 2.5 min. Again good video.

[@supermanscottyjackmore8606]

thank you ,just picked mine up today

[@994Xp]

Do you have a California model. It’s different.

[@nofox777]

My takedown lever is hung in 6 o clock .. skide functions but cant remove it.

[@joshblock1063]

Thank you for the help boss.

[@txbulldogboxing1462]

Thank you! 6 a clock 3 a clock💯

[@itsjustjustin3680]

I just got mine and love it!

[@blaineterrel5367]

I was confused my take down lever is really stiff

[@Zov212]

It’s been 6 years and I still can’t get my slide back on.

[@bradpearson2628]

sort comments by newest if you're still having issues. somebody talked about a really particular issue they were having.

[@rkba4923]

What do you do when the slide won't go back on?

[@americanmilitiaman88]

The sun doesnt set before i fire a new gun i have purchased

[@jayfishandshoot7147]

CB1942EO you must not have a wife and small kids

[@americanmilitiaman88]

@@jayfishandshoot7147 i do and a 7 year old daughter.

[@luispablolee77]

Thanks for this video, quick question, when the magazine is in, do you always need to push down the slide stop to load the bullet into the canon for the first round?

[@inthelandofmorethansmall7582]

Idk if you ever got an answer but no. At least I dont.

[@prettydog37072]

Good video short and simple

[@scottm5811]

Nice job without all the fluff.

[@tylerfarrey4673]

just bought one .. thanks for sharing. Cant wait to shoot it. Got the GF a new PPS M2 as well

[@shawnshipstad8883]

Enjoy, these are great gun. I bought a larger capacity mag -12 round. I think you can get 15 round if you vare to. The extra mags are not cheap. I like to fire 124-147 gr. I suggest you do it. No+powder Sig claims they are rated for plus p, I think you loose controll. You need to hit the CNS.. Bt it helps using a higher weight bullet, when it comes down to crunch Time. Sig after 5 months of my ownership, had to replace the extractor system, barrel and recoil springs. I use top- notch ammo Speer Lawman. I think if you push it in pratice, It will help, God forbid you do experience a threat..