Sig XTEN 10mm by Nutnfancy

[@violentmeadow]

I love my X-Ten, I have tried all the double-stack 10's and this is the only one that fit's my hand.

[@ayyylmao9022]

comp or this one?

[@violentmeadow]

@@ayyylmao9022 This one, I actually went to buy the M&P and found this in the used gun case. I have been through both Glocks and the Springfield and didn't like any of them. The G20 feels like a 2x4, the G29 had terrible trigger bite and the Springfield just didn't shoot well for me.

[@wewillrockyou1986]

That Glock 20 video is still a classic to me, love to see your work stand the test of time.

[@jackgreenstalk777]

So much of his content is that way 👍👍

[@DieselMcBadass1]

Supressor height sights on a red dot ready gun are for cowitness with a red dot, so makes sense to have it, but a threaded barrel would be a good option.

[@steven3379]

Bought mine Oct. 2022, ran 350-400 federal 180gr fmj American Eagle.. Zero issues, then another 200 180gr jhp Fiocchi & 180gr Sig elite V-Crown, again zero issues or malfunctions, also another 50 Federal Train & Protect JHP zero issues. It's very accurate as you demonstrated, as far as recoil is concerned, I was very surprised coming from my .9mm P320xf carry, I expected more, it's very managable and I'm a 69 year old. I would like to get my hands on the "Comp" version for edc. Good review, thanks for your service!

[@Internaught-The-Wise]

I bet it broke down and your lying about it.

[@steven3379]

@@Internaught-The-Wise 1. I'm not a Demoleftglobalist. 2. Nope. 3. Go hug your 2 X 4.. Er... I mean Glock. 4. I've had/have 3 Sigs, none of them have malfunctioned. 5. Better ask you wife BEFORE you hug your Glock. 🤣

[@Internaught-The-Wise]

@@steven3379 1. Why would you turn this conversation into a political rant. It shows your a delusional boomer who needs a nap. 2. Yes. You are the type to lie about something in a yout tube comment. 3. All Sigs malfunction and none have passed a single safety test (Do your research, However I know you won't). 4. You own 1 SIG and have put maybe 20rds through it and called it 400rds. (Liars tend to overexagerate as well). 5. I don't have a Wife and I unfortunately have multiple SIGs and there all garbage and trying to offload them (Again why I know you are lying, or you are lying about how much you have shot your POS SIG). Have a nice day in that delusional head of yours.

[@Internaught-The-Wise]

@@steven3379 Own P320s and they are all garbage therefore I know you are a liar.

[@steven3379]

@@Internaught-The-Wise You don't know ANYTHING, expect a summons from my lawyer. A defamation suit for calling me a liar. 💩Head.

[@dnbuk3111]

Y’all fell out of my feed. Was so happy to see this. And then went to your landing page. Now going to like and comment a number of videos in the hopes it will show back up in my feed. It would be great if KZbin had functionality to add to feed so we do not need to play the like comment game when someone falls out of feed.

[@N6578h]

Suppressor height sights aren’t weird since so many people put red dots on and often try to have the higher sights to cowitness

[@bmstylee]

That is what I was thinking and I'm a fudd with no interest in pistol optics.

[@calebpalmer9317]

Church

[@charleschristianson2730]

I bought my XTEN in 2022 when it first came out and I've EDC'd it and shot it extensively since then. I also owned an M&P 2.0 10mm and a Glock 40 10mm but neither of them ran reliably for me (the S&W wouldn't cycle hot Underwood loads and the Glock wouldn't cycle weak range ammo). I sold them both after getting the Sig, which has been 100% reliable for me with everything I've fed it. Maybe some Xten's have reliability issues but that could be said for anything. I mostly handload so ammo cost doesn't bother me. I don't have a lot of complaints: A threaded barrel, extended mags and more grip modules would be nice, but I expect those to become available eventually. The Sig 10mm is my current favorite EDC option and would be my first-pick GTW option as well.

[@TheSonsOfSimon]

I’ve heard that the 2.0 has magazine issues (the spring specifically if I remember correctly).

[@charleschristianson2730]

@@TheSonsOfSimon The issue I was having with the M&P is apparently recoil spring related. Nobody at the time made springs to correct the issue, and I didn't feel like rigging it so I just sold it. I've never liked M&P aesthetics and ergos anyway, so it was no great loss to me. Similar story with the Glock.

[@jason1440]

I had a terrible experience with the SW MP 40 cal. It didn't feel, shoot, and cycle right. Traded it back, bought a glock.

[@VnazT]

Yes!! Table top gun review! Just like 10 years ago!

[@DARTHDANSAN]

Those are best

[@TheFoxyt2]

Love my Xten comp. Finally a 3.8”!!! In my top 3 fav guns I own.

[@Bixnoodle]

Freaking love this channel. I've been watching this from when I was like 12 years old and only collected knives, now im 26 and I love these gun reviews. Half of my knives I bought because of your reviews

[@cowboysilver4838]

Just got mine last week and I love it.

[@tommccormick9290]

Now I'd like to see SIG come out with their own PCC using the same magazines to go with it like S&W and Ruger already did.

[@DARTHDANSAN]

Glad stilll see videos rolling out

[@chrisbusch1970]

best value for ammo. AAC, PSA has it going on! Also, I love my XTEN, have had ZERO issues with any ammo, guess I'm one of the lucky ones. When I upgraded to the Icarus frame, my enjoyment level doubled and the smiles got wider!

[@doublepiedavid8908]

I’m gonna watch this when I get out from work, but I’m gonna say that I EDC an X-ten and it’s been my favorite pistol so far I will say, I noticed the failures to feed, but they’re much less frequent with full power 10mm

[@chrisstandingbear1947]

I got the X Ten a couple months ago, mainly because the grip fits me perfectly and it's so comfy to shoot. I've only shot a box (50rds) of Underwood 180g (they have the flat nose as well) but no malfunctions with those. I have Winchester 180g that I'm going to try also so I hope I don't run into any issues.

[@papapoonpoon]

Let's be real... If Sig made a double stack version of the P220 10mm it would trample this gun in popularity. Sadly, we all know that will never happen.

[@hartsickdisciple]

Which is exactly why I have a p226 .40 running Underwood's hottest stuff.

[@dmw3086]

If only they brought back the P227 and did exactly that

[@Roberta_Esposito]

hell fkin yes . they are stupid

[@moobutt]

@@hartsickdisciple - Hell yeah! I have .40 and .357sig barrels for my P226 and P229. If you do a little hunting you can still pick up .357sig at a descent price.

[@Roberta_Esposito]

@@moobuttRed Box Sig . STOLE mine

[@moshebenamram6020]

Thank You very much both!!!

[@troyspurling1910]

I bought the full size X-Ten when it first came out. I haven't had any malfunction

[@C95HC95311]

I can't wait for an xdm 10mm review!! Woop woop

[@ericward2005]

You need to review the FN510 Tactical!!! IMO currently the best fullsize 10mm doublestack

[@sms042]

Wish I still had my sig p250 45 acp model. Great shooting gun. I had made a mistake an traded it off for a lesser liked hand gun.

[@sms042]

P.s. That extended 10 mm looks good too!

[@protectiverailroaddad7541]

Everyone who thinks NutNfancy should review the FN 510 please leave a like

[@pauldvorsky1969]

I love My Sig XTEN.

[@rickeco4tango33]

Yes sir, I have a full-size p320 in 45acp!! No flat trigger ❤️ I find Sig in general like better quality rounds, I have a few sigs, and they don’t like steel case stuff Blazer, Winchester white box @ minimum 🤷‍♂️

[@blunts4brekfast]

The suppressor height sights on the other version are for co-witness, not suppressor.

[@sirdanoman]

Need a G29 equivalent grip module with flush mags so I can EDC it and switch to full size when needed. Do it Sig. Do it.

[@Roberta_Esposito]

pfffff it took em 40 years to copy glock , then another 10 years for a 10mm.

[@steventurner9098]

I have shot 500 rds of S&B 180 gr with no issues

[@johndeere1951a]

Love my Glock G40 w/ 6.02" barrel ✌️

[@eTSnipinn]

Have the glock 29. Runs every ammo made in 10mm . Never had one problem with it. Have about 4k round count.

[@TheGripsession]

I remember when i got my 1st 10mm your 2012 video was the only thing that made me feel good about my purchase 😅

[@drob762]

Love my long slide Glock 10mm. I out timney trig and it’s outstanding. Love it more than my neighbors 10mm kimbers.

[@shrimp_p4rm]

Forget the gun. What Spyderco is that? Looks like a Mantra but it also doesn't.

[@GroundStudies]

I'd like to know as well.

[@WatchesAndPhotography]

That was the first thing that caught my eye - I’d like to know also. Beautiful Spydie

[@shrimp_p4rm]

@@WatchesAndPhotography ​ Its Nutn so it's personalized to high hell. Thats fine i'm guilty of it myself. I don't think any of that knife is off-the-shelf put together with the exception of the torx screws.

[@shrimp_p4rm]

@@GroundStudies Daggerr Knives Arrow.

[@craigslue]

Magtech and AAC 10mm ammo is 1200/1200+, pretty much full power 10mm ammo at a great price.

[@joedigenova4401]

It’s too bad you couldn’t get your hands on the ENDURE XTen model with custom stippling for enhanced stability. 😂 Almost immediately thought of this after hearing about EXTENZE on the intro. Love your channel. Thanks Nutn!

[@BeltFedSelfDefense]

I just clicked this video review, have not yet watched. I already last year bought my XTEN and eagerly await my NUTN roast. 😂 Update after watching: Mine ran great. It ran all American Eagle FMJs, it ran S&B FMJs and JHPs, it ran Buffalo Bore hardcast and FMJs and JHPs, it ran Underwood JHPs and FMJs from 135gr to 220gr. It did hiccup on PPU FMJs specifically, repeatedly. I noticed they had a slightly longer OAL. For the luls I threw in some American Eagle .40S&W that I had laying around and it ran and cycled fully, although the gun felt like a peashooter especially with full load hardcast immediately preceding it. I am overall quite pleased, it does what I need it to, which is keep full power 10mm bear defense easily controllable. Nutn no like my gun, ey cri eberytyme 😢

[@asdf12347109]

A long-term TNP'er got me in to 10mm, glad he did

[@jeffreylocke8808]

Nice. I spent a LOT of money on my M&P 2.0 10mm with a 4.625 inch barrel and no safety. It is my only 10mm. Features? Quad ported by Mag-Na-Port and use a Carver Custom HEAVY tungsten non captured oversize guide rod.

[@sienega4625]

Great unbiased review.....good job like always.....keep up the good work. When I shop for a new gun...I always see if you've reviewed it...along with others.....but your reviews always carry more weight to me. I'll stick with Glock or M&P.

[@OfficerPaterFamilias]

They probably saw the name of the channel and thought it was a different kind of “nutt’n”

[@Bobmo88]

😂

[@cwheels01]

Picked up XTEN same year it hit shelves. I'm sure the gun was lovely but I wouldn't know, as the magazines (both magazines that came with it) were awful. They wouldn't even load Sig's own ammunition. I could get maybe 6-8 rounds in before the first round loaded would nose dive and bind up, resulting in the spring tension on all the other rounds being lost. They flop out. I like Sig's stuff, P365 and P229 are my go-to guns but my experience with the XTEN was just ridiculous. Swapped for an XDM in 10mm and haven't looked back.

[@ThePyleDriver]

Got the X-TEN COMP recently and so far love it. POU is chest carry bear defense in the mountains North of Yellowstone and greater Montana. Replaced a snubby Ruger Alaskan .454

[@sirdanoman]

Sir, I am pondering the same set up. I carry Ruger Alaskan .454 on a chest rig in Griz country, 10mm on the hip in blackie/cat/people country.

[@BarnBear]

You do in fact deserve credit for helping to revive the 10mm.

[@HeroOfTheDay545]

I'm looking forward to the D10 review, if that ever comes. I have one and it made me a believer in the 1911 platform. The only issue I found is that MecGar magazines have occasional trouble feeding full power loads due to the slide velocity, the factory ones seem to work fine.

[@jonathanrogers9961]

5:50, I loved the old dot bar, Dot the "i" sig sights.

[@pdx650]

NUTN & TD, I shot a grand power P40L 10mm last Summer (2023) and I felt it shot very well. Ambi controls for my lefty shooting abilities. I also shot a S&W 10MM and liked it better than the grand power (GP), but not by a lot. I have never shot a glock of any kind. I would try to ride a Suzuki DR650 over a KLR 650. Maybe a new Honda Transalp 750 is worth a try too.

[@BCM16AR]

PSA is coming out with a 10mm Dagger.

[@wolfnstrings]

Gotta try to HKP comp for this pistol. Mine just arrived.

[@kevinfarris3581]

I have the XDM 10mm that I like. I got the range pack with it. The SIG looks good. I will check it out soon.

[@TheCenturion8404]

Don’t bother, I have both. Sigs mags are crap

[@theblacklines]

I miss the old tnp - when you didn’t curse and wasn’t crass. What happened?

[@MichaelWilliams-nu6lv]

Love your video for it is entertaining and informative at the same time 😊 Most gun owners are Not out in the ( Wild ) so I think if they would have to be that store or parking lot ( Hero ) the 45 caliber would just fine because the 10mm is really has over penatation issues and of course always carry the 5 inch barrel 10mm or 5 inch barrel ( 45 ) 🔴

[@duroisgawd]

I blew my wad on the xdm10mm and put some heinie sights on it. I love the pistol even though it cant take a red dot. I dont want to sell it, otherwise I'd pick up the sig.

[@noblelegrand331]

will say it's a slower slug but the sandb was amazing for me in water jugs and if it's going through 5 it's not to bad

[@dmitrykarkov4747]

I’m just going to say it: I don’t like modifying my guns. I want to buy it perfect with 6 mags, an appropriate Streamlight product, night sights, and a light bearing AIWB appendix rig all at once

[@davidgraflex2065]

It looks like a great but $2.50 for each round is very expensive

[@robertpatter5509]

If only somebody made a - Single stack - 4" barrel - Standard TFO Tritium night sight set - 10mm ( with Underwood XTP 155gr as the top load they use) -7rd flush magazine and 9rd extended magazine - Thinner than a 1911 - Non 1911 action I asked Glock and S&W if they would do this. Got the standard Corporate response letter of them not letting the public know about future products yet.

[@asonofAbba2]

Sig P220. You want a Sig P220.

[@happyamerican3235]

Wish smith would make a Shield in 10mm but they can’t get the springs right from the get go and they are all about shield 9mm models. More ammo available and more sales. Nobody competes with the Glock 29 currently but I’m not a glock guy. So I wait lol.

[@robertpatter5509]

​@@asonofAbba2 I'm thinking polymer frame that's lighter than a G29SF. Something like a S&W Shield size or the like.

[@AluminumStud]

I'm a huge Sig fan, but I have no desire to buy this one. I had a chance to shoot a mag of Glock 20 gen 5 and it shot so nicely that I'd go with that one.

[@mattwalker2583]

It kinda looks like a small desert eagle

[@mfallen6894]

For anyone that may see this: if you were in the market for a modern double-stack .45acp and you DON'T like Glocks (no knock on them I just don't like the grip and I want a manual safety for a gun I'm shoving in my waistband...) would you go for a P320 Full size P320 compact (9+1 but I assume it will accept the larger mags from the full size?), M&P 2.0, or something else I'm missing? I like the HK's but I don't want to spend 800-900 on a pistol and have it not be a 1911. Guessing I'm not going to find a better deal then the M&P at like $550 w/ two 10rd mags. Any other sub-$600 .45's I'm missing?

[@taylorbrown3286]

Great Review would love to see a review on the newer Glock 20 and 29 Gen 5’s.

[@TheCenturion8404]

XDM is better and ready for prime time. I like the sig but the magazine is the problem. The magazine issue is not a dimension issue as it larger then the tangfoglios I got that are bullet proof, it’s the follower

[@aaronfarnsworth7653]

The time is now, for the P250 resurrection . A firing pin adaptor assembly for the 320 based slide striker channel. Then, a new hammer and linkage to drop into the FCU frame replacing the striker related components or all new P250 FCUs. But I think pitching as cheap a conversion as possible may sell better to the bean counters. Then sig can double their SKUs with hammer fired versions of every 320 model. For the M17 & M18 collectors, "Our troops got hammered over the weekend." Then show a hammered 320MAX, "Max really took a hammering over the weekend." "Hammer the target with the P250 Spectre Comp" So on and so forth. Then the exclusive, limited production, Nut'nstrikered Edition? The TNP250! Only 250 made, get one while you can.

[@dmitrykarkov4747]

There is now a smaller, integrally compensated carry model

[@batmantiss]

Any chance that s&w snaps more, because of the weight of the reflex sight?

[@skipmcpheron3773]

Which would you like better, a 1911 10mm or the Smith Wesson 10mm????

[@philipdove1705]

How does it fire after being frozen in a feeezer? For those of us in alaska . I tried a couple semiautos out that i left on a table outside at -20 when i picked up the kahr 40 and xdm elite pro. Both triggers wouldnt fire the firing pin

[@GammaRayTrae]

I want the comp xten myself. I love the macro and I’m expecting similar. I wish I liked the m&p but everyone I’ve held and shot feels uncomfortable. If I could get rid of that grip safety on the Springfield xd I’d buy it first

[@AhHereWeGo]

I’ve had mine for over a year, and I have my mind made up that I love it…. But I’d love to see you take on the Flux raider

[@Beeeeeefribs]

Curious about Pateron. Is NutnFancy’s Pateron one price per month, or is it per episode?

[@Roberta_Esposito]

Aprilia Tuareg🏆

[@walkercustoms]

Thank you

[@Meater76]

I've learned to be very selective with 10mm ammo. Like you said alot of 10mm is basically 40 in a longer case. American Eagle 10mm fmj range ammo is a good example of this. It's not worth it. S&B and Sig fmj are actual 10mm. There are others but those are the most common I've seen.

[@BeltFedSelfDefense]

I mixed in random .40S&W rounds iI had on hand with the 10mm rounds and it kept running, no malfunctions. Maybe mine is a golden boi.

[@zcavka916]

Should have tried some AAC ammo. Not full power, but pretty hot at a good price.

[@diggernash1]

Finding full house 10mm factory ammo is whole 'nother topic. Comparing my top charge reloads to most factory stuff makes the difference obvious. Some of it is much closer to .40 than it is to real 10mm

[@Moviefan9719]

Hey, do you have any more videos on the vehicle bug out coming?

[@maraudersr1043]

Long time since I watched you guys. Thanks for the review. How about a CMMG 10mm review?

[@cw7legionofpewrights596]

I’ve shot the XTen & like it way more then the regular 320s. The high slides on the 320s just could never get comfortable with it. The XTen felt more like a actual gun, the 320 9mm just feels not solid at all.

[@TOMATO-bf1gd]

Loved the review, was a huge fan back in 2016…good to be back:). Also are we getting a restock on any TNP apparel? Wanna rock some of the patches!

[@Bad_Rattle]

I want a 10mm but I’m leaning more towards the FN510. If only FN would make the FNX in 10mm…

[@loboloco866]

Great review as always NUTN. and tactical D is as good as NUTN dad. thanks.

[@skipmcpheron3773]

Informative review...

[@MichaelBoucher-m1u]

Why does 10 mm and 5.7x28 keep going back and forth. A lot of people can't handle the 10 mm and 5.7 to expensive.

[@alexanderstordeur9434]

I don't think there are any bears in Howie. But they do have wild hogs.

[@giuliocesare7081]

Luv the toys in the vids too brother..

[@Roberta_Esposito]

19:55

[@InGratitudeIam]

I'm hoping that the G40 Gen5 comes out soon.

[@soonerfrac4611]

It’s the 9mm that doesn’t interface with the 10mm or 45acp variants.

[@nicholasyacoub795]

Magtech 10mm is hotter than most pud load 10mm. Best 10mm range ammo if you're spending more is SIG elite, Steinel, or Underwood.

[@OutdoorCanadians]

Nutn are you watching this live with us?

[@grumpyoldretiredcop8382]

Good review, but after seeing Sig's response to the 320's problems and having directly experienced Sig's CS, I wouldn't touch it. It doesn't do anything a Glock 20 MOS or S&W 2.0 doesn't do without worrying about what malfunction the Sig will experience and how Sig will try to laugh it off.

[@aquaman6081]

G29 is a sub compact, not a compact. Thats probably where the sig compact can get some market share, since its not as terrible to grip

[@newbievonnewberson7390]

I want that A7 model badly.

[@Hackmo72]

This is the way.

[@johnheater4564]

You are wrong, 45FCU is same as 10FCU.

[@xxxlonewolf49]

Anyone know off hand if the XD & XDM are interchangeable slides, magazines & holsters?

[@spokanesurvivaltrainingand5797]

What spyderco is that?

[@ryaniam22]

I know nutnfancy doesn't like offbeat caliber selections. But i really think he should try the FK Brno psd pistol in 7.5fk. That round is unbelievable. Can take down an elk at 100 meters. Its basically a 30-30 in a handgun. In my opinion an amazing shtf lightweight firearm when you want a rifle but cannot take the weight

[@DAVIDWTCS]

Supressor rights are used to co-witness with red dots, as well as with supressors.

[@mudpro200]

What model Spyderco knife is that please someone?

[@13mschen]

I don't recognize that spyderco. what is it?

[@13mschen]

ope. its a Daggerr. I see why I didn't recognize it