Silhouette Portrait 3 - Everything you need to know ( Specs, Setup, and projects)

Hi guys! Today I'm going to show everything you need to know about Silhouette Portrait 3, the tech specs, setup, and what projects you can make with it. #Portrait3
Silhouette Cameo 4 -shrsl.com/3n4kz
Portrait3 shrsl.com/3n4kx
HTV - Vinilo Textil (Iron-On) - shrsl.com/3n4l1
Vinilo Adhesivo - shrsl.com/3n4l2
Heat Press HPN shrsl.com/2ae3t
Amazon Shop www.amazon.com...
Etsy shop - www.etsy.com/s...
Creative Fabrica Suscripcion www.creativefa...
Koala Paper and Sublimation Paper shrsl.com/3sazk
***Affiliate links - Enlaces afiliados
♥BLOG- avantimorocha.com/
Social
♥ FACEBOOK - / latinmorocha
♥FACEBOOK GRUPO - / silhouettemania
♥FACEBOOK GRUPO - / cricutmania
♥FACEBOOK GROUP / cricutcraftingcorner
♥ INSTAGRAM - / avantimorocha_1
♥ PINTEREST - / avantimorocha
♥ TWITTER - / 1avantimorocha1
♥ TIKTOK / avantimorocha_1
FTC Disclaimer: This is sponsored by Silhouette America video. All opinions are my own. This post contains affiliate links, and I earn a small commission if you purchase after clicking on my links. It doesn't cost you any extra.
#Silhouette #SilhouetteAmerica

[@DeevToons]

I could not for the life of me figure out why my portrait wasn't cutting all the way through my paper for stickers, even though everything settings, layout, cut lines, and registration was working. Nothing else had told me i needed to SNAP the blade into place for that blue dot!! Thank you sooo much for making that a point in setup, you saved me from giving up on this thing ^^

[@AvantiMorocha1]

You're welcome :)

[@HappymailbyKim]

Same! Gonna try that now.

[@Austeration]

Lol I did exactly the same thing

[@emeseharangozo9588]

Omg,I struggled for an entire day to try to figure out why my portrait wasn't cutting.I just figured that out :D thank you

[@BeautifullyTy]

Literally same and I’ve had my machine over a year now never finding videos explaining it or how it works until now

[@yelicious1]

You saved my life for showing how to put the blade 👏🏻

[@AvantiMorocha1]

You’re welcome ☺️

[@otostahl8776]

Thank you for showing me the basic steps, I'm very new user on Portrait 3. Very useful!

[@achavers2173]

I just got my Silhouette Cameo 3 today. I want to do heat transfer on a tee shirt. I would love a video or info on how to do this. Thanks you.

[@AvantiMorocha1]

Hi, check my video how to make a t-shirt with HTV.

[@wenzbee197]

This was so helpful. I didn’t know how to get the Portrait to even cut. Thank you.

[@AvantiMorocha1]

Glad it was helpful!

[@DrPhylCunningham]

Very informative. I just bought this machine July 4th 🎉

[@AvantiMorocha1]

Hope you enjoy it!

[@shawn638]

Thanks. Good video for the basics, exactly what I needed to get going.

[@AvantiMorocha1]

Glad it was helpful!

[@LeslieGrantlovefaithhope]

@@AvantiMorocha1 do you have an video like this for the portrait 4?

[@ApolloMcrib]

This thing is a noisy sucker compared to the cricut, thanks for explaining how the blade went in, I seemed to miss that pull out tab in the official instructions.

[@AvantiMorocha1]

You're welcome 😊

[@Austeration]

Thanks that was a great help.

[@AvantiMorocha1]

You’re welcome ☺️

[@SchnuffiJames]

Hi when you make stickers is there an easy way to make lettering that doesn't cut but part of a larger sticker? Thankyou

[@AvantiMorocha1]

I’m sorry but I don’t get the question. When making sticker you can make die cut or kiss cut stickers.

[@SchnuffiJames]

@@AvantiMorocha1 But if I add text to a sticker the machine wants to cut out each letter as well unless I take every letter and remove the cut lines separately.

[@ZymixProductions]

Hello Avani, I have a question. Would I be able to use Siser Easyweed heat transfer vinyl on my Silhouette Portrait 3? If your answer is yes, where do you buy yours? Please provide me with a link. I would also like to get the attachment to be able to put the big rolls with more HTV Thank you! 😎👍

[@ZymixProductions]

I Subscribed! Liked and commented! Great video! Thank you so much for making it much better for me to make my decision! 😎👍

[@AvantiMorocha1]

You're welcome :)

[@alexherrera3918]

Nice review. I am about to enter into his hobby, i have a question: I want to cut the Disney Dusty plane skull to decorate airplanes.I need a small size 30mm. Do you think this cameo 3 can do it? I am planning to buy a used portrait 3. I hope you can advise. Thanks

[@AvantiMorocha1]

It depends, if the piece has many details it can be hard. 30 mm is not that small.

[@alexherrera3918]

@@AvantiMorocha1 the piece is the wrench skull from the Disney planes movie. it that complicated?

[@lexarthestrongest1]

Great video tutorial! I just bought one of these and this helped me get started

[@AvantiMorocha1]

Glad I could help!

[@joannapocock6055]

Please can you answer this question.....Can you feed an offcut of vinyl say 4" x4" square through the machine or do you have to use a new piece all the time many thanks

[@monikaann.b.3072]

endlich jemand welche es Normal erklärt danke.

[@n.c277]

Hi! I’ve just come across your page and it has been very helpful! Just a quick question, I’m a new user and my machine is not connecting after pressing ‘Send’, it says ‘Load Media’. Would kindly appreciate any help, thank you!!

[@AvantiMorocha1]

Make sure you’re placing the mat in the right place.

[@mjaners]

Hi! Your video is very informative. However, I would like to know where can we see the "Kiss-cut" setting? Thank you for your future response :)

[@AvantiMorocha1]

Hi, check my videos on how to make stickers with Cameo the process is the same.

[@tabithahawkes8949]

Hi! You mentioned about getting a roll feeder for using vinyl with the portrait, could you recommend one? Thank you!

[@JoeyRam.]

I'm thinking in scan a drawing and choose specific areas to cut, but in 65 lb paper. Can that be done? If so, how will you do it?

[@AvantiMorocha1]

Hi, yes, you need to use the software. You can move the image in the mat to the position you want. You can always download the software for free and play with it.

[@JoeyRam.]

@@AvantiMorocha1 I was looking at the website for the download but without success.

[@kimberlygoins1548]

Hello your video was very helpful and interesting, I would like to know if the Kraft blade 2mm is compatible with portrait 3, thank you

[@nadinek6693]

Thank you for the informative tutorial. I have a 2020 iMac and the Bluetooth keeps dropping the Portrait 3. Anyone else have this issue? I have the machine right next to the computer on my desk.

[@AvantiMorocha1]

Hi, I haven’t heard about that issue before.

[@Lavendr69]

Hiii when I print my stickers the registration marks and the stickers are always mirrored:( idk what to dooo

[@AvantiMorocha1]

Hi, that's weird, watch my video on how to make stickers with Cameo4, the process is the same. It may help you find the issue.

[@Lavendr69]

@@AvantiMorocha1 tyy i found the Problem ♡´･ᴗ･`♡

[@betyerpwet]

Very helpful video! Thorough and answered all my questions!! Thank you so much!

[@AvantiMorocha1]

You’re welcome, I’m glad you liked it.

[@karenreategui4753]

Me encantó tu video y la forma en que enseñas is like a pro! Thank you! Por favor podrías hacer un video mostrando cómo usar la Portrait machine al hacer t-shirts personalizados por favor? Acabo de comprarme esta máquina y aún estoy aprendiendo. Gracias 🙏

[@AvantiMorocha1]

Hola, voy a ponerlo en mi lista.

[@yourmajestyswill]

You are the best. Seriously.

[@AvantiMorocha1]

Thank you 😊

[@lifewithmazzz7139]

Hiii, my machine wil not cut at all. It won’t even make a mark on my heat transfer vinyl at all. I checked and the blade is pushed all the way in. Do u know why this is happening? Also du know any good settings I can use for heat transfer vinyl? Please help .

[@soniyajain6591]

Can we print other pictures outside the library ones

[@AvantiMorocha1]

Yes, as long as they are on compatible with the software.

[@aysharazana9364]

Hello I'm having a problem with my potrait 3,basically the problem is cutting is not aligned with the initial cut. Can you help me out please

[@dinodolic2270]

Can the Silhouette Portrait 4 cut labels from a roll?

[@AvantiMorocha1]

Hi, I haven’t try it.

[@montrailsmith9889]

Do you have to use there templates. Can i important my own design.

[@AvantiMorocha1]

Hi, you can import your own images.

[@montrailsmith9889]

@@AvantiMorocha1 thank you. That was very important to me know.

[@esra4753]

hi can I use all the design in silhouette? and can I use thick paper like 110bi?

[@dianabarrientos9846]

Hola mucho gusto ...tenia una pregunta y esque yo tengo la portrait y todas mis diseños que me regalo y compre me salen error de descarga esto a que se puede deber porfis necesito ayuda estoy estresada porque ya eh hecho de todo y nada

[@AvantiMorocha1]

Hola, no sé cuál será el error, comunícate con el servicio al cliente de Silhouette.

[@suziem2508]

Very thorough and easy to follow 👌

[@AvantiMorocha1]

I'm glad you liked it ☺️

[@navidthenerd2027]

Can you use other apps to cut with this machin? Like corel or else?

[@AvantiMorocha1]

Hi, you can create your own design I another software like Corel or Illustrator, then you need to upload them to Silhouette Studio, make sure you save the file in the format that are comparable with Silhouette Studio.

[@navidthenerd2027]

@@AvantiMorocha1 is silhouette studio free or you have to pay monthly in order to use it?

[@YasminSofea]

@@navidthenerd2027 free

[@ClaudyaRG]

Dear, can I use Portrait 3 with older software version? The last one is not good on my laptop. Thank you :)

[@AvantiMorocha1]

Hi, I don’t think so it’ll work correctly if you use and older version.

[@thegreenwoodhub2508]

Thank you for your video. Could you tell me if portrait 3 machine scans and cuts as well? What do I need to scan an image a special mat? Thank you

[@AvantiMorocha1]

Hi, sorry, I don’t remember. Check the Silhouette America site.

[@tianamama7506]

If you don't have a computer can you still Bluetooth through the phone?

[@AvantiMorocha1]

I’m not a fan of Silhouette Go the app, which I feel is still lacking many things. I recommend using a computer.

[@mondesign2654]

thank you so much, very useful

[@jcxousagi]

Super helpful! Thank you so much! 💖

[@AvantiMorocha1]

Your welcome :)

[@melikawong4909]

I'm so happy i didn't get a circuit. Thank you so much! Can i use any vinyl

[@AvantiMorocha1]

Hi, yes, you can use the material of your preference,

[@elteeralte2335]

I have a problem on registration failed in portrait 3, how to solved this

[@AvantiMorocha1]

Hi, weird, try calling Silhouette customer service

[@agonzalez175]

great video ! i was deciding if i wanted this and your video pretty much sold me :)

[@AvantiMorocha1]

I'm glad you liked it 😊

[@TheTipsydLife]

I can’t get my portrait 3 to register or cut correctly when it will randomly cut it’s about 1” off and cuts into my image. I’ve emailed silhouette and no response. I’ve researched and tried everything I’ve found. I’m trying to make stickers and it’s been impossible!

[@AvantiMorocha1]

Hi, maybe is the position where you’re placing the mat in the machine.

[@TheTipsydLife]

@@AvantiMorocha1 I’ve tried that as well as many other things in a fb group I’m in. Can’t get it still. 🤔

[@maniok1977]

I have a question, if I want to cut my own designs, can I do it or do I have to use those from the machine? Is it ok to use shrink plastic on it?

[@AvantiMorocha1]

Hi, you can use your own design, just make sure to save your file in any of the formats that are compatible with Silhouette Studio.

[@JCCreatorStudio]

do you recommend silhouette cameo 4 or cricut maker?

[@yelampi]

Hi, can I cut every image that I would with the machine or just the images which are in the app ?

[@AvantiMorocha1]

Hi, you can can any image as long as this is compatible with Silhouette Studio.

[@jorgesolari8952]

Hi. Can I cut 2 Mil thick Stencil Sheets, Transparent Clear Plastic Film on the Portrait machine? Thanks

[@AvantiMorocha1]

Hi, 2mm for portrait is too thick, it’s going to take forever to cut it. I wouldn’t recommend it.

[@jorgesolari8952]

@@AvantiMorocha1 Gracias Morocha. Felicitaciones por los videos!!

[@eliasbaeza6954]

How can I do it if I have my own design and I want to cut it out to put it on a heat press could you help please

[@rosalioinojosa]

Thank you for your info. I'm new to this. Now one question: Can I cut my own silhouette design with this machine? Thank you again.😀

[@AvantiMorocha1]

Hi, yes, you just need to make sure your designs are save in the format that are compatible with the machine.

[@selfmasterytv]

thanks very informative

[@lorensims4846]

Thanks! I've been looking at the Silhouette Cameo 4 but it looks like this little Portrait 3 will do everything I need.

[@AvantiMorocha1]

You're welcome :)

[@MiMiOrt]

Can I use my phone after I set it up with the computer?

[@AvantiMorocha1]

Hi, Silhouette Go is too basic. I prefer use the computer.

[@MiMiOrt]

@@AvantiMorocha1 Thank you.

[@selfmasterytv]

why or how the autoblade doesn't cut the mat ?

[@AvantiMorocha1]

Hi, because in the software you’re selecting the material. The blade knows what setting to use base on the thickness of the material.

[@KunthysVlog2023]

Does The machine Model Deliver To Cambodia?

[@brookea1503]

Hi thanks for this video! Can you give some more info on how to load the mat? I make stickers and my machine struggles to read the registration marks and the cutting seems slightly off. I’m pretty certain this is a user error and I’m not loading it in right. Thanks again for this video!

[@AvantiMorocha1]

Hi, make sure you're using mate paper (not glossy). Use the same size paper on Silhouette Studio and the mat. If you're using A4 paper put it on the line mark for A4 on the mat.

[@hotpinkbritnibaby]

@@AvantiMorocha1 hello! I was wondering why glossy paper cannot he used?

[@itsbea3859]

@@hotpinkbritnibaby hey, I know I'm not the one you asked but its because glossy paper reflects light! Because of a bunch of tech stuff, those reflections make it harder for the machine to read

[@YasminSofea]

@@hotpinkbritnibaby usually, people put on matte tape on registration marks, so the machine can read them

[@clarisechavez507]

I know this video is older but I need help with my silhouette portrait 3 it won’t register marks and I’ve tried everything can you please help. I’ve asked several people on KZbin for help and no one answers me

[@AvantiMorocha1]

Hi, are you trying to print and cut?

[@marciabrown5713]

I have watched your video and like the way you explained everything! Could you explain the explorer in English? I just see it in Spanish. 😊

[@margot4174]

Hello, Sorry to bother you, I discovered your youtube channel today and I had a question about cutting machines. Indeed, I saw your nice presentation videos on the portrait silhouette 3 and on the cricut air explore 2 and I was wondering what are the differences between these two machines? I'm hesitating between the two and I don't know which one I bought ... I also wonder if the silhouette portrait 3 can cut A4, plasticized sheets and very precise small images ? I would like to use this machine to create games for children ... and other personal projects :) I don't know which one would be the most suitable ? Thank you for your reading and thank you in advance for your answers. Good evening ps : sorry for the mistakes, I speak French :)

[@galacticgummybearzzz]

hello, did you end up buying a silhouette? Does it let you print with A4? And are the cuts accurate for stickers?

[@emeseharangozo9588]

@@galacticgummybearzzz I had the same questions,I ended up buying the portrait,the software is more useful for any small projects ,precise cuts ,I just love it

[@vakkalagaddalakshmi4376]

Hi,is it cut balsa wood?

[@mercedesberriosv194]

Interesante, en Bolivia dónde puedo adquirir, por favor.

[@AvantiMorocha1]

Hola, no conozco distribuidores en Bolivia.

[@saharabbas3163]

Please kindly tell if portrait 3 can easily cut felt.

[@AvantiMorocha1]

Hi, I won’t recommend for felt. If you want to use a Silhouette you’ll need to use Cameo4

[@saharabbas3163]

@@AvantiMorocha1 but I have ordered portrait 3😧

[@ninacharles8628]

Can I cut glitter cardstock with this portrait 3?

[@AvantiMorocha1]

Hi, you can try, but I’ll recommend Cameo for better results.

[@faithwiegand420]

What size can you do print and cut on it

[@AvantiMorocha1]

Hi, you can use letter sized paper, the area is less because it need to have the print marks.

[@allyweeeeee]

i bought a 2mm kraft blade to use on this and cant get it to work??? do i need an adapter?

[@AvantiMorocha1]

Hi, yes. You need to get the adapter.

[@Anna-qwerty]

Have you tried magnet sheets on it?

[@AvantiMorocha1]

No, I haven't.

[@ariaelle499]

How do the paper stick on the mat?

[@AvantiMorocha1]

Hi, the mat is sticky. 😊

[@TheKrazyKrafts]

Plz tell what’s difference in portrait 3 n cameo 4?

[@AvantiMorocha1]

It’s mainly the cut power, Cameo4 can cut thicker material.

[@pborionsurabaya5061]

Can it be used to cut polyflex?

[@AvantiMorocha1]

I’ll recommend Cameo for thicker material.

[@ninisdesk]

is there a way to repeat a job without going to your laptop/computer? I usually cut all the same sticker sheets in one session so having to go back and forth between my silhouette and laptop is a hassle when I'm trying to also get other stuff done at the same time.

[@AvantiMorocha1]

Hi, I think the best option will be to use the app on your cellphone or mobile device.

[@MrsCaviar]

Thank you!

[@AvantiMorocha1]

You're welcome :)

[@jessiw4554]

Hi! I was wondering how matless cutting works for this machine?

[@AvantiMorocha1]

Hi, it works pretty well.

[@cla3862]

Do I need a desktop computer?

[@AvantiMorocha1]

Hi, you need a computer, desktop or laptop. You could also use a mobile device, but this one has its limitations.

[@anonymousaccount1571]

How can I calibrate my portrait 3?

[@AvantiMorocha1]

Hi, unless you are having and offset issue you don’t need to calibrate your machine. Silhouette is pretty accurate with print and cut.

[@namesregine9035]

Can this cut out cardstock?

[@AvantiMorocha1]

Yes.

[@namesregine9035]

@@AvantiMorocha1 thank you so much!!!

[@cutraisa6020]

Hai..can i cut cardstock 200 gms?

[@AvantiMorocha1]

Hi, it’ll be better if it’s not thicker than 65lb.

[@DCANOTXZ]

This one is better than Cricut?

[@AvantiMorocha1]

Hi, I’ll say it’s similar to Cricut Joy Xtra, however Silhouette software for someone that is not familiar with graphics programs can be more challenging. Cricut Design Space is a very intuitive and friendly software.

[@DCANOTXZ]

@@AvantiMorocha1 thanks. I have a Cricut joy and I like it very much. Saw couple videos of you and thought was better

[@taraaara]

hello! how does the bluetooth work? here do you need usb??

[@AvantiMorocha1]

Hi, watch the video again,, I showed how to do it.

[@taraaara]

@@AvantiMorocha1 thank you i did ! this video helped me a lot !

[@beatricemarini9224]

Thank you for your precious suggestions!!! Can you please help me, I am going crazy with this. My autoblade doesn't cut even if I have followed all the steps in the right way! It leaves a sign on the paper but doesn't cut it enough even if I put a high force and 2 steps

[@AvantiMorocha1]

Hi, make sure you’re putting the mat and the material on the right position. Something similar happened to me and that was the reason.

[@beatricemarini9224]

@@AvantiMorocha1 thanks for your answer. I have put the mat near the second line as you show in your video, and I have tried to put the paper on the mat both where there is the line 8.5x11 and A4. I don't know what to do. I was wondering buyind the manual 2mm, but I'm afraid to have problems also with that one.

[@nadinemoseley6041]

thank you x

[@AvantiMorocha1]

You’re welcome 😊

[@phillyelite3379]

How do I load MY OWN image from phone

[@AvantiMorocha1]

Hi, you just need to upload them to Silhouette Studio.

[@amoraisha]

Guys! I’m officially struggling to get things right! I broke my mat! Omg! Question: I need to make label stickers from photoshop. I just need to use the shape tools from SS. However, the shape tools doesn’t place inline with my label to cut. Any helpful soul to guide me on this? Really desperate. Clients are queuing for my sticker s

[@AvantiMorocha1]

Hi, check my video on how to make stickers with Cameo, it may help you.

[@janjounsabbah5307]

Name of vinyl paper

[@AvantiMorocha1]

I use Koala sticker paper.

[@mybluebelly]

What kind of a cut are we talking about here? Is there a thin frame as well or just a clean cut? I mean...i hope the cut is clean...?...!

[@AvantiMorocha1]

Hi, if you’re talking about the stickers, it’s a kiss cut.

[@rahimaqasimi8962]

Why do i need a heat presser

[@AvantiMorocha1]

Hi, if you want to use iron-on (HTV) you will need a heat press to transfer your design.

[@sonymats007]

Do you get this in india?

[@AvantiMorocha1]

Hi, I don’t know, you need to look for a distributor in your country.

[@seric.3927]

Thank you so much for this video! So reassuring! 😮‍💨☺️❤️

[@AvantiMorocha1]

You’re welcome ☺️

[@AvantiMorocha1]

Enlace al video en Español - kzbin.info/www/bejne/equ5kIyuZ7OjZ80

[@angeladita]

I needed to comment, because I used your video to start my cutter. I paid for it 230$ because I live in EU and they add tax to the price. That machine is a pure waste of space, nerves and money. Do not buy it. I purchased it for stickers. I bought printable stickers (so the sellers already made a silhouette cutting files.) All I had to do is print and cut. My cheap printer printed it out perfectly and when I put it into the cutter, the troubles start: registration failed. Out of 10 times, registering is only successful once. So I eventually ended up buying those super expensive stickers anyway, despite having the printables, the printer and the cutter. I watched million videos on KZbin how to fix the damn thing. And I need to say their software is extremely complicated. If anyone is reading this before purchasing, my advice is not to buy. You will regret it.

[@hobbyhopper3143]

This is pretty misleading for someone who has never had a cutting machine and is researching. All of the instructions are clear with the exception of the sticker portion. PLEASE NOTE that the machine doesn’t recognize the shapes of your stickers. You MUST use the software to tell the cutter where to cut. Please watch an entire sticker video before making a decision.

[@AvantiMorocha1]

Uh? Most cutting machines work this way, you need to use the sofware to send it to cut.

[@julielippmann6022]

Too many ads

[@TracieClaiborne]

Thank you, this was very helpful!

[@AvantiMorocha1]

You’re welcome ☺️