Prestige A3+ R vs Prestige A3+ DTF Printer: Desktop DTF Printer Comparison

[@SilhouetteSchool]

⚠Update: As of July 2023, the Prestige A3+ and A3+ R models have been discontinued by the manufacturer ⚠ Prestige now offers two new models 👇 1⃣The roll-fed A4 DTF printer is designed for entry level and small runs. The compact desktop DTF printer’s max print width is about 7.5” wide. It’s available in three colors: pink, mint and classic gray ⭐ Recommended Bundles ⭐ A4 DTF Printer with Ink, Film, Powder, Cleaning Supplies, RIP Software ➡ shrsl.com/476pb A4 DTF Printer with Ink, Curing Oven with Built in Air filter, Film, Powder, Cleaning Supplies, RIP Software ➡ shrsl.com/476ph 2⃣The Prestige R2 13” DTF Roll Printer is size-wise the closest thing to the old model A3+ and A3+ R, however with a higher price tag than the original A3+ R model. ⭐ Recommended Bundles ⭐ Prestige R2 DTF Printer with Ink, Film, Powder, Cleaning Supplies, RIP Software ➡ shrsl.com/476p4 🔥 If you are looking for a DTF printer that’s most directly comparable to the Prestige A3+, that would be the Uninet 100 DTF Printer which is a 13” wide sheet fed (only) desktop DTF printer. I have this printer and as long as you print daily it’s on the easier side to maintain. The Uninet 1000 DTF printer is a mid-range DTF printer and is more comparable in price to the Prestige A3+ R (half the price of the Prestige R2) and allows for the use of a roll and to be part of an inline setup. 🎥 Uninet 100 DTF Videos: kzbin.info/aero/PLT9hB3BOKb_i1b1RUAOCyJTjczI1gpw3Z Shop 13” Uninet 100 DTF Sheet Printers (Starting at $3795) ➡ shrsl.com/476pn Shop 13” Uninet 1000 DTF Roll Printers (Starting at $4590) ➡ shrsl.com/476po

[@user-ld4qr3eg7b]

I’m so excited. I have been waiting for you to get them back in stock. I ordered the full bundle today

[@michaelmontgomery8335]

Does anyone know if the roll version will do just short runs - for example, if I need a 12x4” logo, will it just use that much of the roll? I assume it does, and that seems like a great cost savings vs using whole sheets if you don’t need to.

[@vwms1273]

Hello, I read somewhere that the white ink expires 3 months after opening. So does that mean that the ink that was put in the printer needs to be replaced as well every 3 months if you don't use it all within that time frame?

[@RurouniStarchild]

What lubricant, or grease, would you recommend I use for the metal rail for the R version?

[@tylerbronman470]

Aapc only sells a4 now and there is no info on it

[@CheBesDesignBox]

Very helpful. Thanks Melissa!!

[@jeffgoss1]

What is the cost for the Prestige A3+R with seismo 11 bundle bundle and do you have approx. date when product bundle will be in stock? Thank you

[@carinayalaSV]

Hi Melissa, I love your videos thank you for explaining everything so nicely I just purchase my prestige A3 and my white background is not dark enough I’ve tried to mess with settings but can’t find anything.

[@SilhouetteSchool]

There's a video here on how to increase the white ink www.silhouetteschoolblog.com/p/prestige-a3-and-a3-r-dtf-printer.html

[@unique4youllc.55]

What’s the largest size the curing oven will hold?

[@SilhouetteSchool]

Hey there! 16"x20" check out the supplies list here with additional information! www.silhouetteschoolblog.com/p/everything-to-know-about-dtf-and.html

[@CheBesDesignBox]

Was looking to order a DTF printer today but the extra pack of DTF paper is out of stock...

[@SilhouetteSchool]

Hey there! I reached out to Swing and they got that fixed. You can add it to your cart shrsl.com/3on1u

[@marqusbraddy5145]

How’s the maintenance if u don’t use it everyday would it be a problem.

[@SilhouetteSchool]

All DTF printers require more maintenance than most other printers due to the white ink. I have a video on the maintenance as well.

[@RAGSFROMTEXAS]

Is the Roland bn 20 a must buy ?

[@SilhouetteSchool]

I love them all for different reasons! So it really depends on what YOU need. I have a comparison guide here: www.silhouetteschoolblog.com/p/melissas-fleet-of-printers-for.html

[@yosoymoequius]

Hey Melissa!!! Love you all you videos, and I've watched lots of them. Can you make a video of the differences Prestige a3+R vs the Procolored l1800.. Which is better? Because the prices are very different. Thank you!

[@SilhouetteSchool]

I don't have the other printer you referred so I won't be able to do a comparison unfortunately.

[@mjmr8743]

If I print on sheets on the new AR instead of roll does it still feed to the inline?

[@SilhouetteSchool]

No sheets do not feed through the inline set up - only the roll

[@fraysongz12]

The DTF prints how’s the feel? Does it compare to a DTG feel or a screen print feel? Please let me know thinking bout purchasing a printer. Thanks

[@SilhouetteSchool]

Hi there! Yes, there is a hand, I suggest using a T Seal finishing sheet for a softer feel. Check out all our info about it here: www.silhouetteschoolblog.com/p/everything-to-know-about-dtf-and.html

[@TamiT3]

I love your videos. I asked this once but I am so tore up on what to do. I have a new epson 15000 printer that I either want to convert to sublimation or DTF. I had to have get a wide print no matter which way I went. Most of my orders are xl and bigger. I love sublimation so when I can on even cotton if light color I use the dtf film and powder. However, everyone wants darker material and the only way to do that is easysubli unless I go to DTF. What does DTF feel like? Is easysubli so expensive that its not worth it? Should I do the epson 15000 as a sublimation and then buy the prestige A3+? Any ideas from anyone is greatly appreciated.

[@SilhouetteSchool]

I don't recommend converting an Epson printer for DTF ..you are still going to feel limited b/c it can't print white.

[@TamiT3]

@@SilhouetteSchool thank you so much !! I've needed someone to say that. How does dtf feel?

[@TamiT3]

The premier u have shown maybe the one I go with does it come with the ink?

[@Eliazword]

Can this printer be a uv printer too ?

[@SilhouetteSchool]

Hey there, this is only DTF.

[@czintx]

Is there a small "hobby" DTF printer?

[@SilhouetteSchool]

Hey there, this is really the best 'economical' option.

[@lifewithcha]

Is the ink safe for children’s clothing?

[@SilhouetteSchool]

I would reach out to the manufacturer for questions regarding ingredients or certifications that you are looking for specifically.

[@hazukesuizenji]

How much that printer dtf...

[@StephanLamar81]

A3+ is $3199. A3+ R is $3999.

[@fraysongz12]

Help in need? What bundle should I get 7k budget please help? Thanks

[@SilhouetteSchool]

Hi SockJunkie Tv, it would be easier to provide you the help you are requesting if you could please send an email with some additional information. Please provide as much info (including cut settings / exact material / screen grabs) as possible when emailing. My email can be found through the contact page on Silhouette School Blog www.silhouetteschoolblog.com/p/blog-page_9.html

[@tanyabee2024]

The A3+R is a headache. I regret buying it. Doesn't print and too much troubleshooting.

[@AnnieWhere73]

I just bought the A3+R. How does it not print" and what problems are there? :/

[@tanyabee2024]

@Lisa Nicholson (Crafty Smudge) not sure what I am doing wrong. I filled in the ink. Connected it to my computer. And it first started flashing red lights. I restarted it about 3 times and then the green light was solid. I then wanted to print an image and all it did was flash the red lights again and wouldn't grab the film. Idk, I am going to try again.

[@AnnieWhere73]

@@tanyabee2024 I hope you have better luck next time.

[@tanyabee2024]

@@AnnieWhere73 thanks

[@SilhouetteSchool]

Hey there, I would highly recommend reaching out to the retailer that you purchased your printer from.