silverback Tac-41 mancraft SDIK conversion kit installation

[@ericmarkl-po3ny]

Bonjour salut je viens d'installer le kit HP a sur mon tac41 je trouve qu'il fait beau bruit tire? As-tu une solution pour faire moins de bruit je te remercie

[@ericmarkl-po3ny]

Bonjour je vu sur une vidéo que tu aussi un MK23 tu la mi an HPA ? Ton mk23 et toute d'origine ? Merci de ta réponse

[@ericmarkl-po3ny]

Bonjour quel le modèle de macraf tu a installé sur tac 41 stp merci

[@madladhobson]

this one. and select tac-41 from the drop down menu shop-mancraft.com/en/sdik-hpa-for-spring-sniper-rifles/39-sdik-conversion-kit.html

[@ericmarkl-po3ny]

@@madladhobson merci quelle maudite faut-il faire pour le montage j'ai trouvé que toi pour le montage sur tac 41 ici ans France j'ai rein trouvé je pense que je serai le seul France à monter hpa sur taille 41

[@ericmarkl-po3ny]

Et merci pour toutes les l'enseignement que tu vas donner

[@madladhobson]

@@ericmarkl-po3ny oui, j'étais frustré de voir que personne n'avait fait de vidéo sur la façon de procéder car les instructions sont au mieux inférieures à la normale yes i was frustrated to see that no one had made a video on how to do this as the instructions are subpar at best

[@ericmarkl-po3ny]

@@madladhobson oui tu es le seul à avoir fait vidéo pour installer Minecraft 41 sinon tu as pas fait de modification

[@WM84629]

I’m thinking about doing this to my TAC 41. How have you found it and would you recommend it?

[@madladhobson]

@@WM84629 it’s great. Only issue is from the airline. But all in all it’s brilliant

[@ericmarkl-po3ny]

Quel est faut-il mettre dans les tac 41 macraf ?😊

[@loicknaox3838]

Slt , question pour le mettre en hpa avec kit mancraft faut un bloc hop-up d'origine aeg ou faut passer sur le gbb ?

[@madladhobson]

mine is still using the aeg hop up. and after a 24hour milsim i can say it works perfectly with that. no need for gbb hop up le mien utilise toujours l'aeg hop up. et après un milsim de 24 heures, je peux dire que cela fonctionne parfaitement avec ça. pas besoin de gbb hop up

[@devylebeaux9945]

super video par contre a tu changer le bloc hop up j est le kraken penses tu que ca irra et pour le canon tu a quoi en therme de diametre

[@Berserker436]

Hey it may be too late to say but in my research pdi barrels have a great tolerance of 0.002mm they are stainless steel and cold hammer forged just like real steel. Here are my recommendations for diameter keep in mind HPa is a lot more consistent and more powerful in the case of using the mancraft HPa system which can be used to reach 700fps at 220psi with 6.01, 6.03, and possibly even 6.05, with those barrel diameter 120 psi would get 500fps all with 16in barrels. I suggest experimenting with 220 psi you could try to fully utilize that power and get more stability and accuracy over medium to long ranges, ideally in this case extereme ranges😂 and use a 6.15mm diameter barrels less efficient and less fps meaning more chances for air to go around the bb but with the fact it can reach 700 fps at 220 psi with the 6.01, 6.03, 6.05 diameters try to use 6.15 at 220psi and get 500Fps with more stability and accuracy but still great fps all for fact that the tac 41 has the second largest air container (41cc) to it self

[@longshotbutcher8003]

Do you have todo anything with the hop up or is that part of the kit

[@madladhobson]

I didn't do anything to the hop up. I already have the advanced rotary hop. But as far as I can tell it works straight away just adjust the pressure from the air regulator on the hpa tank to get it to the FPS/ joules you want

[@longshotbutcher8003]

@@madladhobson so I’m guessing what ever mob that you do in the future. Smaller barrel, silencer bb weight. All you have todo is adjust the pressure on game day. Is that correct?

[@madladhobson]

@@longshotbutcher8003 yeah. And I found out the original barrel length is quite wasteful and will often loose some pressure before the BB leaves it. I shortened mine to the next one down. Can't remember the length. After that one simple change it became much more accurate and much more consistent FPS and range.👌

[@longshotbutcher8003]

@@madladhobson I think the original is 510mm the shortest is 330mm and some sizes in the middle. Cheers for your time

[@robertwhite2097]

Does this make it a short pull

[@madladhobson]

No the bolt is still the same length

[@xt0rk]

GG man ! Beautiful work ! Any return after 2 month w/ this config ? 😍

[@madladhobson]

I have been using it but often struggle with getting recordings. It's very accurate and consistent. Been getting serious range compared to stock and to the sniper mechanics wasp kit. And it sounds great

[@xt0rk]

@@madladhobson thx 🤜🤛

[@xt0rk]

@@madladhobson Thank you for the speed of your responses. Last question ^^ For maintenance, what do you recommend? Sorry for my bad english.. I'm FR ^^

[@madladhobson]

@@xt0rk maintenance is the standard really just clean the inner barrel and every so often I take the hpa part out to clean any debris that got into it. I've put a little lubricant in there too but doesn't seem to make much difference

[@xt0rk]

@@madladhobson Thx ❤ Really 🤜🤛

[@ericmarkl-po3ny]

Bonjour jai un problème je tanvoi une photo la TETE et plus petite que d'origine je ne peux pas visser la tout d'origine

[@ericmarkl-po3ny]

Ça serait pas le bon que j'ai commandé je te remercie ta réponse

[@ericmarkl-po3ny]

Ré rondelle que tu mets derrière dans le piston

[@madladhobson]

Je l'ai mis là pour amortir le son lors du tir. semble fonctionner i put it there to dampend the sound when fired. seems to work

[@ericmarkl-po3ny]

@@madladhobson à OK je veux acheter Minecraft j'ai des soucis pour l'installer pourrais te demander des conseils je te remercie

[@madladhobson]

@@ericmarkl-po3ny of course

[@ericmarkl-po3ny]

​@@madladhobson j'ai pa compris ?

[@madladhobson]

@@ericmarkl-po3ny im anglais à l'aide d'un traducteur. si vous avez besoin d'aide, envoyez-moi un message et aidez-moi là où je peux