Stalker Tac 41 Kraken Hopup Review and Installation!

[@airsoftconnor]

Hopup chamber: www.skirmshop.nl/en/kraken-tac-41-tdc-hopup-chamber-cylinder-head.html?ref=airsoftconnor Scorpion Piston: www.skirmshop.nl/en/scorpion-piston-tac-41-ultimate-edition.html?ref=airsoftconnor Morpheus Barrel: www.skirmshop.nl/en/sniper/tac41/upgrades-internal/inner-barrels/stalker/?ref=airsoftconnor Air Breaks for the Scorpion Piston: www.skirmshop.nl/en/scorpion-tac-41-gbb-air-brake-set.html?ref=airsoftconnor

[@Diggilicious]

Thank you for your videos on the TAC 41 and upgrades. I'm new to airsoft and repairing/upgrading guns and they are very helpful for me. I ordered the TAC 41 P and it's on the way!

[@bladezx2]

Nice upgrade. I did the same to mine two weeks ago but haven't had the chance to get to Black Tiger and test it out. Looks like this week will be a wash too....thanks to Ian

[@airsoftconnor]

Went there today, not many people showed up because they thought they were closed!

[@m60user]

I cant wait to get that hopup-all because of you!!! Great video.

[@airsoftconnor]

Thank you! Its definitely worth it!

[@TheeShaggySniper]

Today I learned what that damn screw on the underside of the bolt cap is for... I'd removed it as it was scratching up my receiver to no end - and now I realize why my HPA kit for the Tac41 was all over the place. It shot straight - but some shots dropped, some shots flew high, some shot low. I'd noticed the bolt had a bit of play back and forth when the round was chambered (about 2-4mm), and figured that could be why. Turns out that screw locks the bolt firmly in place. I wish they'd have have made the guide ramp for the screw just a bit wider. That and the other reason I'd removed it was because the full 120° throw of the bolt was interfering with my scope setup - if they'd make another bolt cap that had more acute throwing angles (90° or 60° bolt throw), I'd love that. Hell I could even just tap and dye it myself on the current one...

[@Terminatorbart]

Sweet upgrade!

[@inocentesdebelford]

Congratulations on the video, I believe it must have taken a lot of work. This made me want to buy the upgrade kit, but I'm left with a doubt. When choosing the kit, there are 3 options for barrel length. Which one would be ideal for precision and range (with 0.48 bb) for the volume of air in the tac 41? It originally comes with 510mm of barrel, but I see a lot of people using shorter barrels, does that make sense? Sorry if I asked any stupid questions, I'm a rookie. Thank you.

[@jamesmcgroarty2060]

Great video and review.

[@airsoftconnor]

Thank you!

[@ghost_ghillie]

lets gooooooooooooo💥💥💥💥

[@Brealriding]

what length outer barrel and inner barrel are you using ? also what silencer? that setup looks cool as

[@airsoftconnor]

330 outer 390 inner dts .300 suppressor

[@thechickstributeshow]

What type of spring are you using to achieve 2.2 joules with .48 BLS BB’s

[@Greendore]

The fact you had to use a dremel to have the upgrades actually work is pretty piss poor on stalkers end.

[@Diggilicious]

Do you have to have the morpheus barrel for this? I was thinking of picking this up to go with stock barrell and the advanced mass piston from silverback.

[@airsoftconnor]

Yes i use the Morpheus barrel! The hopup only works with unbridged barrels. Stock is bridged aeg type. You need a gbb type barrel.

[@kerimercin6893]

Hello, I just installed Stalker for Tac41p. To be honest, I was expecting a quieter shot. Thinking that the spring was strong (Rapaj4j), I tried it with different springs (ARP M150, Nov. m180 and Original n75), but frankly the result was not very satisfactory. I tried it in a closed environment, but I think my previous setup (Nov. M180) was much quieter. Where could I be doing wrong? Would it be right to attribute this only to the spring selection?

[@airsoftconnor]

Use the smaller air break

[@kerimercin6893]

@@airsoftconnor I forgot to mention, I use long air brakes, should I really prefer short air brakes? I also installed the green pad sent, today I will try the short air brake as per your advice, do you have any other advice?

[@Tochimon_]

Did you use Stalker HopUp Chamber with Stalker Piston ??

[@sanybalkanaciairsoft3253]

My question is, does the HU can take Bridged or unbridged inner barrels and with a 5mm or 7mm window?

[@airsoftconnor]

Unbridged and yes 5 and 7mm work. Pdi barrels have issues

[@aidasmacas9764]

I got wasp piston. Is that Cylinder head works whit wasp or I need to change to scorpion piston ?

[@kaiyincheung6227]

hello. this hop up chamber fit for lambda gbb inner barrel？

[@montyswel9633]

Hey! The little black nub square thing that goes in above the hop bucking, what way is it suppose to go?? I put mine in and everyone shows it pressing down but mine doesn't! Did I do something wrong or is it suppose to do that? I got two in my package and it looks identical to the other! I'm so confused, please help!

[@airsoftconnor]

The curved part is supposed to straddle the barrel in Hopup. You probably just got an extra one!

[@mindstore-baohoxemay3659]

Can i use stalker bucking for ML inner

[@arkinator114]

For some reason I can’t push mine all the way into my 330mm twist barrel, it gets stuck right where the outer barrel goes from wide to narrow, any tips? It’s like a few mm off from where it needs to be

[@airsoftconnor]

Make sure you dont have the rubber barrel stabilizer in the way. You only need one stabilizer at the very end

[@arkinator114]

@@airsoftconnor unfortunately, that was not the issue. Even without any barrel stabilizers(or barrel, I also tried it with just the hop up unit), it just simply won’t go the extra few mm. I messaged stalker on fb, so hopefully they can help me. Might just be bad tolerances on the outer barrel, so I’m likely going to have to dremel some material away

[@h0ll9w]

Im having the same issue, ive sanded parts but not finding the problem

[@mattstephens9658]

What kind of suppressor is that?

[@Diggilicious]

Would you please link the suppressor you're using?

[@airsoftconnor]

www.evike.com/products/20542/ Any 24mm+ suppressor will work

[@ernstmeijer3067]

Stalker rules

[@Ed_Trucking]

Question! What outer barrel length do you have ??

[@airsoftconnor]

Its the 330mm outer barrel!

[@Ed_Trucking]

@@airsoftconnor thank you sir ! You have the novritsch suppressor ?

[@driumz]

I would love to but sir nothing is in stock….