Sim Lab XP1 Pedals with Simagic HPR - What do we get ?

Here I show you how I designed the bracket to install the Simagic HPR to the SimLab XP1 Pedals
So far it is working for Iracing / ACC and AC via Simhub.
Added to my estore. Thank you !
r3designz.com/...

[@sergiograffic]

Do you maybe have instruction manual about how to attach the brackets to the XP1 pedals? I have seen your video and it only shows how to attach the haptic motors to the bracket…

[@AKTechIT]

Great that you attached it but would be better if there was a camera to the pedals to show the vibration motors as well, good job!

[@racingwithryan214]

@@AKTechIT great idea ! I will try to create a quick video focusing on the movement in the future.

[@kevinmcrell4899]

You have any more stock or shipping issues still?

[@Wittygoose9341]

Shame nobody has done a Venym Atrax model yet. Nice video

[@racingwithryan214]

Thanks for watching ! Unfortunately, I dont have access to those pedals to make a mount.

[@sergiograffic]

thanks for this! does it work also with the new HPR Neo ?

[@thumpermike269]

Any luck getting more of these in the near future? Page is not working for me tonight.

[@Gorilla_Jones]

Just bought these pedals. Yes! Thanks! Can you design a dampener mount?

[@racingwithryan214]

Send me the specs or link of the damper you plan to use. Maybe i can design a mount without buying a damper :)

[@RyanRC1]

That looks amazing. 3D printing in the works !

[@racingwithryan214]

Yes ! makes your creativity into a reality. it pretty fun

[@victoryroadracer1790]

How is the hpr feedback performance for throttle and clutch pedals? Is it advantageous or gimmicky?

[@Mr_Latte_UK]

Thanks I have ordered. It would be awesome if you could design an adapter that would work with this bracket. Or design another that would let us connect the Earthquake MQB-1 bass shaker as this offers much stronger feedback than the HPR.

[@racingwithryan214]

Maybe send me a link of the product with dimensions? I will try to design one. Thanks !

[@yellowflash111]

I wish I had a 3d printer so I could do this! Awesome Mod!

[@racingwithryan214]

Thank you! they are becoming more reasonable now compared to 10 yrs ago :) so user friendly too!

[@AR-Race]

I bought the stl files off Ryan and just sent them off to a 3rd party to be printed. There are loads of companies out there doing it and they all have really quick online systems to spec out what materials etc. But shop around, some are far cheaper than others. Cost me about £40 for 3 brackets, caps and rings, not bad considering they do all the supports etc. and post it out to me.

[@ivansanchez2759]

Looks amazing! How about that pedals (without any mod), I'm going to get one of those in about some weeks and I'm hyped!

[@racingwithryan214]

I dont think i will look for other pedals after this. I came from Fanatec V3 to Asetek Invictas. This is more of my driving style. Has enough travel and my knee don't hurt after long races :) I still have mine in default setup.

[@keeef23]

Do these work if the car has no abs and activate when the wheels lock?

[@racingwithryan214]

Yes! it will vibrate when wheels lock. I have it enabled in simhub. You can feel it more when driving open wheel races.

[@keeef23]

@@racingwithryan214thanks for your reply

[@masteredultrainstinctgamin7441]

Where do I connect the simmagic haptic motor to?

[@racingwithryan214]

I had to purchase the SM control box

[@TinasheSavanhu-n9q]

just picked up the simlab xp1 black edition when will the haptics adapters be back in store ? thanks

[@racingwithryan214]

Hopefully this week! Congratulations on the purchase. I wish we had the black edition before. It looks sleeker!

[@CarlosN]

Will they be back in stock? The printed part?

[@racingwithryan214]

Printing more this weekend.. I will put them back in stock Sunday Night. Thanks !

[@kevinmcrell4899]

Any more restocking?

[@soldarknezz]

Looks nice. But how are the reactors connected to the pc? When installed on the p1000, they get connected to the base plate and use the usb cable the pedals provide. Power comes aswell through the base plate.

[@racingwithryan214]

In my case, i had to but the control box then connects to the PC. I chose simhub to control them since I already use them for other features.

[@soldarknezz]

where did you got the control box? TY@@racingwithryan214

[@hoax-racing808]

You killed it ! do you send it in france ?

[@racingwithryan214]

send me msg from the site. Will try to see if shipping can be done. Thanks !

[@alejandrojullian]

nice work. Do you need the simagic Haptic Control Box to make them work with your pedals?

[@racingwithryan214]

Thank you !.. yes i had to buy the control box too.

[@FellowEnginerd]

Looking to purchase but shows out of stock. Should I wait or try to figure out how to self print the digital file? Thx.

[@racingwithryan214]

Thanks for your interest! I will have more stock next week. I try to have a few per week.

[@FellowEnginerd]

Thank you! I well check next week

[@FellowEnginerd]

Did I miss this weeks post, still shows out of stock :) Thanks in advance sorry to nag.

[@racingwithryan214]

@@FellowEnginerd My apologies, I just updated the site.. its back in stock :) thank you !

[@FellowEnginerd]

@@racingwithryan214 purchased, thank you!!

[@RoadRashHD]

How did you get them to work in game??? I need to do this with my Heusinkveld's

[@racingwithryan214]

I used sim hub, I will try to make a video this week to share my settings. cheers !

[@victoryroadracer1790]

Wow this is amazing!! I just ordered my set of the XP1 pedals. What components are needed to run the Simagic HPR accessories?

[@racingwithryan214]

You will need the Simagic control box, power supply and USB (amazon) cable. The hardware that came with the motors is what you will also use to mount them to the bracket. Cheers !

[@victoryroadracer1790]

@@racingwithryan214 oh ok thank you so much 😁

[@chubbs6504]

Where can I buy these

[@racingwithryan214]

I got the haptics from Siracingpros. the bracket you can but the files on my estore.. r3designz.com thanks !

[@chubbs6504]

@@racingwithryan214yes the bracket ty just subbed

[@Silverturky]

Hey man do you sell the file for this as well so I can 3d print it myself?

[@racingwithryan214]

Yes! i do sell the file.. check out R3designz dot com thanks !

[@0svold]

Hello Ryan, great mod and lots off creativity going into this project. There is lot of fuzz about those addons. I have a bass shaker mounted underneath the pedal plate, powered by very cheap amp from aliexpress connected to simhub, which drives the feedback from iRacing. Do you think, there is any significant advantage in this setup of yours in comparsion to mine?

[@racingwithryan214]

Thanks for watching! With this setup you can individually feel the haptics on the brakes and gas. With the whole plate shaking both pedals rumble? But if it feels right for you, specially on the brakes then you are good. Abs I think is more important. I personally just have TC and wheel slip on for the accelerator pedal with ABS for the brakes. I also have a rumble motor below my seat for other effects. Maybe if you can transfer what you have now on the brake itself and add another one for the gas. You get better tunning options.

[@0svold]

@@racingwithryan214 Thanks for the answer. I have the shaker on the plate only for AB, TC and wheel slip as well. Yes it rumbles the whole plate but the ABS occures only when you brake so its somehow connected to the pedal engagement. Beside that, (and i have no proof, i did read this somewhere) human brain is able to differ between different frequencies quite good. So i have 40Hz for ABS and 30Hz for TC and it is indeed a different signal. Just out of curiosity, what values do you use, please? Pitty it is impossible to test both setup at once i would really love to know how much appart those 2 solutions are.

[@racingwithryan214]

@@0svold I have mine default, it is 30hz for abs and wheel lock while 40hz for TC and wheel slip.. I also added shifting :)

[@nickdantin7727]

Hey man I’d really like to buy the complete printed part from you. I don’t own a 3d printer. Is there anyway you can print me a set and I’ll buy them from your Etsy store? You’d be a life saver!

[@racingwithryan214]

I am stuck with inventory at the moment because of the local post office went on strike since last week :( other options of shipping cost alot more. Hopefully the strike will be over this week. *cross fingers*

[@k7simracing920]

Good job Ryan!

[@racingwithryan214]

Thank you! this I must say is a worth it DIY.

[@Super-Schopenhauer]

I would like to buy it.

[@racingwithryan214]

I added a link to my estore. Thanks !

[@dennisgrigaliunas]

@ryansgarage214 nicely done 👌 Is there a reason you don't want to have haptic feedback for the clutch? Also, do you have the STL file shared online perhaps or are you willing to share it? #askingforafriend

[@racingwithryan214]

I seldom use the clutch and one motor is a bit pricey :) I uploaded the file on my estore in the description. Cheers !

[@dennisgrigaliunas]

Cool, thanks for the feedback!@@racingwithryan214

[@CoastGaming]

anyone selling these already made yet? id buy some right now lol

[@edwardlowe2745]

Can you make me a set? I’ll pay

[@racingwithryan214]

I just updated the video description with the link to my estore.. take a look. I will restock next week

[@tdhitchins]

Please could you send me the 3d print file? I was going to look into doing this but have never ventured into it before. I would forever pray with your name to God and name my first born "Ryans Garage"

[@tdhitchins]

My printer is broken atm though for some reason :( However I will get these printed somehow!!!!

[@racingwithryan214]

@@tdhitchins I have uploaded it to my estore.. r3designz.com/product/sim-lab-xp1-bracket-for-simagic-hpr-digital-file-only-stl/ hope that helps. I can also offer a printed version

[@tdhitchins]

@@racingwithryan214 Great, thank you for this :) One very happy racer right here 💪 I’ll let you know if I need to look into having a printed version. Thanks mate

[@racingwithryan214]

@@tdhitchins Hope it works out ! I will be creating a short video on my Simhub setup soon

[@tdhitchins]

@@racingwithryan214 Got my printer working :) Almost finished printing the parts now! I do need to buy the simagic reactors yet but the prints are looking really good, THANK YOU

[@dxrk1923]

just picked up the simlab xp1 black edition when will the haptics adapters be back in store ? thanks

[@racingwithryan214]

hopefully next week !

[@dxrk1923]

awesome ill be checking the website daily!@@racingwithryan214