Рет қаралды 28,373
Over the holidays I made a number of these little candle holders for the family. I originally saw a similar project on Pinterest and enjoyed how simple they were.
The material is a really nice piece of Scrap Walnut that had some surprise figuring in it.
This is a really simple project, that doesn't require too many tools.
Start by measuring your matchbox and cutting a grove big enough to hide the matchbox.
In the video you will see me cutting a groove for the matchbox in the side grain, after having the candle holder for a while that was a mistake, It should have been done in the end grain to prevent the wood from warping and crushing the matches.
Next drill a 1.5" hole the depth of a tea light.
Sand until you're tired of sanding, and then apply the finish.
I typically use Tunge oil for everything that does not need to be food-safe but you can use your favorite finish.
I hope you enjoyed this one, and please if you haven’t already, please like 👍 and subscribe 😁
You can also check this out on the blog
imamaker.ca/20...
Share, Like, and Subscribe:
bit.ly/subMaker
Lend a hand!
Buy me a coffee - bit.ly/helpMaker
Amazon Store - bit.ly/shopMaker
Follow:
Instagram - / heyimamaker
Facebook - / heyimamaker
Twitter - / heyimamaker
Website - imamaker.ca/
Finishes Used:
Mineral Oil
Paste Wax
Tools Used:
Tablesaw
Incra Miter Gauges
Drill Press
Drill Bits
Square
Ruler
Pencil
Sandpaper
#giftideas #recycled #maker #woodworking #diy #reclaimed