Simple RC Body Painting Tips & Tricks! - How To: Spray Paint The Pro-Line Ford Bronco | RC Driver

[@rcdriver]

How do you paint your bodies? Spray cans or airbrush?

[@WSquared60]

I have a $150 airbrush and a mini compressor...I use spray cans :-)

[@101sailorboy]

spray cans always... air brushing seems intimidating

[@sharkfatrccustoms]

I use an airbrush, although I started off with rattle cans. Have a look at the ones I've done (shameless plug) :D instagram.com/sharkfat_rc_customs/?hl=en

[@brettludwig7701]

Is this going on a 4x4 stampede?

[@OswaldBeef]

Not Orange on my White Garage Door thats for sure SNarf Snarf Snarf

[@toddwanke602]

Thanks for the video - getting ready to do my first paint job coming up, and this is really helpful. Truck looks great, BTW!

[@Syphic-wp9xn]

Thanks for this video. I’m inspired to finally paint my own body.

[@giant-bigfootspeedwayhotwh7505]

You did a great job... Thank you for the info.

[@ReadySetRC]

Great tips. If it's what I think it's going to be, it's going to be a nice looking project.

[@bob6168able]

Thank you for sharing!! Very well done

[@lylekehrer6159]

I plan on getting one of these Bronco body's, only wish they had a Bronco ll body - I had a '85. I'll review this again for the tips whenever I do get the body.

[@Billothy69]

I watched this after painting my first ever body, but it's ok because that one is just a thrashing body that's getting messed up anyway. and I think it turned out well for my first try. I can try using some of these tips in my next one though which will be a nicer one anyway

[@FordMaverickFanatic]

I wish Proline still made these bodies!

[@boba4588]

I keep my tape in zip lock bags keeps edges clean thank you for the tips

[@robertplaisier8844]

Greg, super helpful video. Great looking body! My boys and I are excited to try some new body styles for our trucks.

[@wendyon4517]

I put tape (and other things) into dollar store plastic bags. They come in all sizes from 1"X2" up. Screws all go into tiny bags with their parts number. A little OCD but I only have a few RC and I know when I'm running out of some parts :)

[@transambill1]

A thin layer of shoe goo on the underside of the body around the body mounting holes and in the wheel wells will strengthen the body and prevent paint loss due to tire rub and roll overs.

[@miniRCSports]

great video man

[@samg3203]

Thanks mate, the body looks awesome 👏👍🏻

[@s13kuminachu]

Good tips!

[@ralphhowing3473]

Just like the method I've learned the last thing before decals is over spray film, that why when spraying outside you have factory mask, just remove the mask where you want paint!

[@WSquared60]

Really like how that came out! There's another body on my buy list. Subbed.

[@mikes062]

That body looks awesome! I wish they'd make a 1st gen chevy blazer, I think there was one for the wraith at one point.

[@mattluszczak8095]

to wash the bosies i use a shaving brush. its really soft and gets inti difficult areas. buy a cheap one. works great

[@martinneps9387]

Have you ever painted a hard body what do you do with them in preparing the body and what kind of paint can you use on it and do you have To primer the body before painting

[@lkncatfish7586]

can you make a show on how to paint the roll bars?. lf you wanted them to be chrome. what type paint, etc....since it would be on the outside

[@staystoked1834]

this vid was really helpful thx

[@Kaidox1971]

Make sure you use part number on the Tamiya cap start with: PS-# color and not TS-# color, the guy didnt say it ! TS is good for reduced model plastic

[@brandendavis6369]

Just got my second body for my car!

[@paulrosselle9747]

Can you use rust oleum 2x paint and primer for plastic

[@Ralph368]

Good tutorial video very helpful to me. Why don't body makers add body film on the inside?

[@brettludwig7701]

That’s a good idea to put a scx10 body on a stampede 4x4

[@piconbmx1964]

Hi, I'm from Brazil, please let me ask you is this yellow Ps-19 or Ps-6

[@piconbmx1964]

It´s about these sprays cans Tamiya that you show in the video that painted the bubble that I would like to know if it is Ps-19 or Ps-6

[@Bobbybbops]

Dumb question can i use this body for any 1/10 scale? Like an arrma senton?

[@TangodownNZ]

I saw a guy use liquid masking film. What do you think about that?

[@mosmith3026]

Is it possible to use a white sealer or primer instead if white paint?

[@CmwSpeedrunUk]

Nice 👍🏽

[@silverarrow7849]

Thanks for the video ! Is this body compatible with the Enduro Sendero? Thx

[@rcdriver]

Yes, you can fit it to that chassis.

[@CarlosMunoz-je5lv]

Very nice paint job. What Tamiya yellow did you use?

[@nsvaluto48328]

Greg, I want pant a younique effect water droplets. its recommend to use enamel paint. Is the lexan paint like enamel consistency thanks

[@techandtoys2055]

Are these any particular paints for rc, or can i use normal acrylic spray paints as tamiya is not available at my country.

[@kylep6322]

Go to your local hobby store and buy the special kind or you will ruin it

[@davechatelle6505]

Greg What is the difference between black paint and black backer paint for RC bodies

[@Crazyman-ur8ky]

Dave Chatelle th difference will be what’s called vantablack. Vantablack will not show on camera because there is a 255 color limit even of the iPhone 11 (for example) it will be hard to see the body lines but other than that it will look cool

[@Douger318]

so im gonna paint a race buggy red and black i paint the black first

[@senditstudios9250]

About how many cans would you need of each color to do a basic project like that one? I am looking to paint a slash body.

[@ponyboy2195]

2 1 you want the the to be then 1 can to back it up example I I painted my slash metallic blue then backed it up with silver

[@sammygonzalez7627]

Did not show how you got that clear film on, and how you painted the grill with black and yellow... Not much help there

[@danielkonrad1444]

CLear Film comes with the body. Its already on. And the Grill is probably a decal.

[@chilly1of1]

if i plan to paint my body black do i still back it up with another color?

[@cwatson42785]

William Orozco No. Not if you want your back black..

[@ca9th]

William Orozco you serious?

[@donb4138]

The markers easily come off with isopropyl alcohol.

[@cwatson42785]

When you wash the body does it make the over spray film come off when it gets wet?

[@sareoshorts]

Chris Watson no. It comes off after you paint it

[@STEVOD313]

Hey my sisters just had the twins like ten minutes ago! Proud uncle

[@NikkiNexo777]

Spray cans. Usually 1-2 colors. Simple, because the body's ultimately get destroyed on my Basher or SCT track vehicles.

[@rcguyz6084]

The protective film on my body pelted off and wrinkled what should I do?

[@Jarhead1313]

Will this body fit on a Traxxas Stampede VXL?

[@hudsonvalleywanderer11]

I just did my first body with straight scissors... that was a huge pain in the a$$ lol

[@paultro8457]

I'm having problems with my arrma outcast. My ESC won't exit heat protection mode. None of the electronics are working. I charged the batteries and put new ones in the controller. Did I burn out my ESC? And does my ESC have anything to do with my Servo not working?

[@andypastore3299]

This is the wrong place for this question. But to answer it, yes you have "cooked" your esc. Yes your cooked esc is the reason your servo is not working.

[@scottfrancis6915]

How do i stop my clear bodies from chipping the paint?

[@danielkonrad1444]

Use the right paint. Tamiya PS spraycans for example. Like shown in this Video.

[@rabbitfootedkitty1339]

Well I painted a Proline Chevy Silverado body for my t maxx with 4 colors: metallic blue up front, a pink stripe going diagonally across the middle, metalic purple in the back and a black bed, for it just to go to waste because after a couple of runs, the paint all over the inside fell off randomly. It looks pretty ugly and I don’t know what I did wrong. I first cut the body, sanded it, washed it, masked it and painted it. It looked good only with some paint bleed in the pink stripe area. I’m really disappointed for a first body that I painted.

[@jimhimesjr]

What kind of paint did you use? I’ve used a paint that said it was for plastic that did the same, the problem was it wasn’t for flexible Rc bodies. Make sure the paint specifically says it’s for Rc bodies. A clean body and Rc paint holds up well to flexing/etc.

[@rabbitfootedkitty1339]

I used the normal Tamiya paint. Oh wait a minute, my black, white, and metallic blue paints I used say “for plastics” on them while the pink, metallic purple and smoke (tiny) say “for polycarbonate.” I think that would be the issue! Half of my paint was for plastics and the other half was for specificly polycarbonate.

[@liulangmy]

hi， how long have to wait forcthe 1st code？ or 2 and 3？ i painted mine， but in one crash， the paint likes tear from the body 😓😓😓

[@randomstuffno1caresabout3]

Btyd Rc's Fun you need atleast 3 coats and wait 5 to 10 mins between each coat

[@scottfirman]

Go to an automotive store and get real tape for masking your body, never use regular masking tape unless you like bleed through. Its not that expensive it really isnt.

[@Andre-ei9yo]

the action figure driving it should be oj simpson

[@shirokami6504]

I am going to have to correct you because there is one wrong way to paint a Lexan body not using polycarbonate specific paint

[@crawlhardrc989]

Too much talk not enough do.

[@234racing4]

Do me a favor shut up

[@tashaver4388]

Mind numbing

[@opairsoft8100]

Take a shot everytime he says body...

[@MrUnder30seconds]

why did you spray it the ugliest colour imaginable?

[@19safe53]

Yak yak yak, right shake paint can, right. Not very helpful.

[@Victory_Tower]

Naja...

[@gvoluto2816]

Bla bla bla bla 😡

[@paulrosselle9747]

Can you use rust oleum 2x paint and primer for plastics

[@piconbmx1964]

Hi, I'm from Brazil, please let me ask you is this yellow Ps-19 or Ps-6 I use spray cans