FOXWELL NT710 - BMW Bi-Directional Scanner and Coding Tool Overview

[@peter9020wqf]

Can this code the battery? eg) changing the Ah and type to AGM for example? What else can it code?

[@mikecameron7272]

Yes it can

[@Trump-The-GREATEST]

Phoenix Plus scantool is the best for any old and newer BMW! Worth every penny!

[@CaffienatedMothman]

Welp. I know what my next purchase is going to be. My E46 needs this.

[@rhinevalleygarage]

How do you use it to change the tire size?

[@Relaxationwithmeditation]

Can this unit code new EDC shock absorbers for F series?

[@joechambers09]

Can you use this to program a replacement fuel module on 2012 328i

[@rj7008]

Direct comparisons would be helpful. For example, please compare the BMW Foxwell NT710 to the BMW Launch X431 Elite 2.0 Pro, both of which you have reviewed. Which is better in your opinion?

[@bimmerfan6538]

That's a lot of functionality. I like it!

[@mikeycraig5454]

Hi mate is there electronic bleeding procedure for fuel pump after filter chsnge

[@Galaxylynx12]

Can you do emission (smog) pre check with this scanner?

[@RussellDodds-x4g]

Very helpful. Just got this fir my bmw X3

[@DEFCON1.]

Can this code ABS modules? Vin number sync to the ABS module?

[@kingkenny8245]

Can this tool code fuel pump control module

[@aceofhearts4265]

Can this scanner reset the vanos adaptations?

[@mattcoyle9490]

Any major differences between this nt710 bmw to the foxwell nt726 when working on BMW's as they are about the same price?

[@SimpleCarGuy]

That's a great question! Foxwell NT726 is a great tool for MANY vehicles. The NT710 offers more functionality but ONLY for BMWs. NT710 All Modules All Special Functions Active Testing Coding NT726 All Modules 8 Special Functions NO Active Testing NO Coding 90+ support makes of cars Hope that helps.

[@tym340i3]

How do I code my airbag and seat light off I try to code the two but the lights don’t go off?

[@420Darkstar666]

@@SimpleCarGuy so the 710 is better just for bmw cause it’s specifically for it? Or the 726 cause of more features? Currently researching and overwhelmed on which one to get. 😅

[@joi6845]

Hi, I have a question. will this scanner reset the new wastegate actuator I put in my BMW?

[@ahyesstonks5375]

I believe so if it’s meant for a bmw car ect then it should be

[@CSIG1001]

can this do a wheel speed test for all 4 wheels using the speed sensors on the 4 hubs?

[@SimpleCarGuy]

As long as the car reports it on the module, it can read it.

[@tomg4793]

Hi, I recently received a brand new NT710. Day 1 activated, indicating 85% battery life. I completed the registration process online. I turned it off. A week later, and this is my first time using the NT710, I want to work on a car today, and I can't get the scanner to turn on. I hit the orange on/off button, and all I see is a green light flashing a few times and a blank screen. I pressed and held the on button for 3 seconds with the same results. Now that I have the scanner plugged into the wall charger, nothing has happened after two hours. Please assist if you have had this issue or have a solution. Thank you so much; I really appreciate it.

[@sipmeister3611]

The batteries are very faulty I got mine and it was crap you can take it into a phone shop so they can replace battery for you

[@michaelcoleman8088]

Will it read OBD1 like the foxwell nt510?

[@marknoir]

Hi. Thank you for a great review. I have a 2004 E46 and convertible top doesn’t work. Will this scanner be able to read codes for the convertible top problems? Thank you.

[@SimpleCarGuy]

Yes, you will be able to see codes, hall sensors and microswitch status

[@marknoir]

Amazing. Thank you. There’s also Launch Elite BMW at half-price. I wonder if that one dress the same.

[@terrymc5180]

Check micro switch in boot luggage compartment,

[@marknoir]

@@terrymc5180 Hi. It's been awhile, thank you for reply. Top is fixed, it was a flap motor.

[@Shade_Tree_Mechanic]

​@@marknoir That's great that you got that fixed. I always like to see a reply with the confirmed fix as well!

[@이기현-d1u]

Good scanner for BMW, not Gm.. It shows diffrent funtion depends on what kind of vehicle. My chevy impala does not provide functions like yours.

[@trun10tion]

Can this tool reset cas to dme?

[@SimpleCarGuy]

If you mean program the CAS module to the DME (and accept a new key etc), I don't believe it can.

[@Wix11ven]

okayy so this is definitely not a tool for the layman ahaha

[@mosbyernest4]

Can u code the injectors?

[@JNUMBKLYN]

nope

[@franckleprodhomme1020]

Yes it can ;)

[@PaulH-e4l]

can this perform a dec coding for an E90?