Demo of a single bay-8 card 2001-8032 repackaged panel at an apartment complex. All original componets of the system remain with exception to the outdoor pulls and signals. FOLLOW ME ON TWITTER: / safetech0415
Пікірлер: 26
@ZakWolf7 жыл бұрын
I like the annunciator with the old 1969-1978 Simplex logo on top. Some buildings at my college originally had them when they were built in 1978 (they're gone now.) Seeing those weatherproof Wheelock AS horn/strobes with the Simplex-branded Sigcom pulls reminds me of the parking garage at our city bus terminal; they have a Simplex 4005 system from 1999. Those devices were obviously installed way before Simplex began making their own weatherproof horn/strobes. Inside the bus terminal they have 4903-9236 horn/strobes and 2099-9756 pulls with Stopper covers.
@davidredpath47817 жыл бұрын
Awesome video (as always)
@safetech7 жыл бұрын
Thanks for viewing!
@ZakWolf7 жыл бұрын
BTW, what are the interior fire alarm signals? I'm guessing they could be 2903-series alarms, or maybe even 4050-80s if it's an earlier 2001 system.
@safetech7 жыл бұрын
wileyk209zback No interior signals, wasn't code at the time of install.
@Aaronproductions7 жыл бұрын
Interesting setup
@coltonleake84917 жыл бұрын
SAFETECH, why did the panel beep when you pulled the fuses out? And, why did the fire alarms sound when you pushed the fuses in?
@CODMarioWarfare5 жыл бұрын
I can answer this. The fuses are on the alarm circuit so that if something shorts out, the panel doesn't fry. When he pulled them, the panel detected that the wiring to the alarms wasn't connected somewhere and beeped because it detected trouble. Then, he pulled the alarm, but since the fuses were out, the power could not reach the alarms. When he pushed them back in, the alarms got power and sounded like they should've been.
@CraigBaker968377 жыл бұрын
Ooh! 2099-9139 pulls!
@sirenfreak577 жыл бұрын
Very nice! Assuming it does steady because there's no coder card or march time card?
@seanjuth4 жыл бұрын
Next time your at this particular job site, can you demonstrate the reset from the annunciator?
@railfannerpnw7 жыл бұрын
Nice video!
@safetech7 жыл бұрын
System Sensor Lover Thanks for viewing!
@GaryBeltz7 жыл бұрын
I'm guessing the panel is set to continuous?
@safetech7 жыл бұрын
Correct
@CJ98995 жыл бұрын
Gary Beltz it doesn’t have a March time card in it
@Dave-ji1hv7 жыл бұрын
Wait were those wheelock AS's?? On a simplex system? Unheard of!!!
@GaryBeltz7 жыл бұрын
Actually it's more common than you think Simplex buys other people's equipment depending on the installers and the company they work for If you look at Weatherdan's University of Albany fire alarm videos The University has Simplex systems with the pulls, annunciators, and panels being Simplex equipment but all the notification appliances horns, bells, speaker strobes etc are all Wheelock alarms. There are other videos with them setup like that as well look around.
@ZakWolf7 жыл бұрын
Simplex used to use lots of weatherproof Wheelock alarms. Nowadays I think they just use their weatherproof speaker/strobes (ET70WP), as Simplex now makes their own line of weatherproof TrueAlert horn/strobes and remote strobes.
@Dave-ji1hv7 жыл бұрын
Interesting
@STR2K63 ай бұрын
@@ZakWolfthey even rebranded wheelock fire alarms too
@SafetySecurityAlert7 жыл бұрын
cool!
@davidredpath47817 жыл бұрын
Do those pull stations take the B keys?
@safetech7 жыл бұрын
Yes.
@davidredpath47817 жыл бұрын
Gotcha and NP!
@Goldenrod6367 жыл бұрын
Damn I was hoping it would be something more interesting. Nice video though.