SIMULATE MACRO-B TOOL PATHS IN THE G-WIZARD EDITOR

Here is the link to a FREE 30-day download of the G-wizard Editor.
www.cnccookbook.com/g-wizard-...
Copy and paste the program below that I used in the video into your editor and load the variables with different values and watch it change shapes.
%
O0001(PARAMETRIC PROGRAM)
(LOAD 4-DIGIT PART# ON VAR #500 LINE)
(PART# 1234-01 ENTER 1234 IN #500)
(PART# 1235-01 ENTER 1235 IN #500)
(PART# 1236-01 ENTER 1236 IN #500)
(PART# 1237-01 ENTER 1237 IN #500)
#500=1237
GOTO#500
(TL1 .500 DA ENDMILL)
(TL2 .25 DRILL)
N1234(PART NO 1234-01)
#100=2.(LENGTH)
#101=1.(WIDTH)
#102=#100/2
#103=#101/2
GOTO100
N1235(PART NO 1235-01)
#100=4.(LENGTH)
#101=2.(WIDTH)
#102=#100/2
#103=#101/2
GOTO100
N1236(PART NO 1236-01)
#100=6.(LENGTH)
#101=3.(WIDTH)
#102=#100/2
#103=#101/2
GOTO100
N1237(PART NO 1237-01)
#100=8.(LENGTH)
#101=4.(WIDTH)
#102=#100/2
#103=#101/2
GOTO100
N100
(MILL OUTSIDE PROFILE)
G0G17G40G80G94
G91G28Z0.
T1M6
S2000M3
G90G0G54X-.35Y.35
G43H1Z1.M8
G1Z-1.F20.
G1Y.25F10.
G1X#100+.25
G1Y-#101-.25
G1X-.25
G1Y.35
G1X-.35
G0Z1.
M5
M9
G91G28Z0.
G90
M1
N200
(DRILL)
G0G17G40G80G94
G91G28Z0.
T2M6
S1000M3
G90G0G54X#102Y-#103
G43H2Z1.M8
G0Z.1
G81Z-.25R.1F4.
G80
G0Z1.
M5
M9
G91G28Z0.
G28Y0.
G90
M30
%

[@amareshsethi1211]

Thank u sir🙏👍

[@xiaoshizi131]

Hi Tom Stikkelman nice explanation. If you can take a look and try to run this example in the new version of G-Wizard, version v3.17? Can't simulate the given example. It's throwing up the Error:O1 has already been defined and cannot be defined again. Also when editing the G-code the numbers of my numeric keypad are not corresponding... Kind Regards, XSZ.

[@jonathanmtz8091]

Hi