JARDesign X-Life v4 Full Tutorial | Free AI Traffic for X-Plane 11!

[@davidoflanagan]

Thank you for taking the time to show us from installation to actually starting the plugin. I had a problem that X-Life was crashing my game when i exited X-Plane but that problem has now gone by following your instructions. Thankyou

[@makaveli2tt]

Awesome explanation. You convinced me to get this add-on. Thanks

[@twinpalmsvideo2741]

Totally new to sim world. Thanks for your well done videos.

[@jznsnb5618]

Prob the first youtuber that I've found with the best accent. Better than mine ofc. Thanks for the tutorial, man!

[@SimulationChannelDeluxe]

Haha thanks mate :)

[@jznsnb5618]

@@SimulationChannelDeluxe No probs!

[@bensibeijn4671]

Very many thanks for you time and effort, guiding us through all these add-ons. Your explanations are easy to follow. Appricated

[@flyguy2595]

Hi, I cant get X life Deluxe showing any aircraft. Installed bluebell data. No error messages, x-life map shows airborne aircraft, but no aircraft on runways or gates. Any suggestions?

[@jc59jc]

Hi SCD. Love your tutorial videos. They are clear and right to the point. For quite some time I have wanted to interact with ATC but there are not too many people available to properly coach the process. I figure perhaps the best way to start is using a plugin like X-Life. I was wondering if you could make a video of a flight using X-Life Deluxe using ATC communication. Thanks for what you do for the X-Plane community.

[@damienb7924]

Ich mag dein accent :D. Habe mir x-life auch herunter geladen, wusste aber nicht dass man noch andere files herunterladen muss. Vielen dank für dein tutorial, das mir sehr geholfen hat

[@SimulationChannelDeluxe]

Sehr gerne ;) Grüße

[@TheHenkka65]

Thank you for a clear and through walk by. :-)

[@lukethomas.125]

Just curious, what's the difference between the free and deluxe versions?

[@auntiebondi3904]

This was a very good video and thanks to you I am now enjoying x plane without paying. Thank you!!!

[@ishtiyaqmakda-coffeelover3942]

Great. Thank you for fulfilling my request :)

[@TacticalSandals]

for some reason I dont have the purple lines between my taxiways or the icons of the planes when selecting gates, makes it a nightmare to do anything. any idea how to toggle them on?

[@Coastingonlife]

I wish this Ai traffic did the departure and arrival complete, but after they take off they disappear in couple minutes

[@joezamora4418]

Great tutorial about how to use X-Life in X-Plane11 thank you

[@VaderPaw]

Problem with add on is that flight plan does not support adding SID and STAR explicitly, has a placeholder as exact words SID and STAR. So planing the exact runway for departure and arrival is not there. Not sure why that is, as for example simbrief allows for a full path.

[@leahwitt7141]

I did everything that was instructed in the video, everything is installed in the right place, but the X-Life isn't even showing up in my plugin's menu in X-plane. Can anyone help?

[@hermanamex6294]

Many thanks for this excellent tutorial. Unfortunately my pc specs are way too low at the moment. Xplane will CTD with the bluebbl packs installed. But....Ryzen is on its way somewhere at the end of the year.

[@nitroseven]

There’s sometimes a weird bug where a plane in the air has another plane ON it any fix thank

[@lucaspetiot9620]

Same issue, did you get a fix ?

[@xiliviation7463]

try turning off draw parked aircraft , he said that in the video too

[@xiliviation7463]

@@lucaspetiot9620 try turning off draw parked aircraft , he said that in the video too

[@nitroseven]

Xili Viation i did. it it still happens

[@ruslamp2838]

Did you find the solution yet?

[@rayg1022able]

Hi there, how do you chose which airlines are at your airport? And to remove the airlines that don't belong?

[@tenskippern1394]

Thank you for all the tutorials, was wondering if it's possible to start a flight at top of descend and fully execute approaches,? if so would appreciate an explanation tutorial. thank again

[@SimulationChannelDeluxe]

In general that's not possible afaik. The only aircraft I know that have a usable and properly working "save in flight" function are the Toliss Airbusses, and maybe the ZIBO 737-800X (but I've never tried it in the ZIBO).

[@IGreyfoxxI]

Zero dislikes so far. Impressive!

[@Arya-ov3ke]

NVM, 1 diss

[@Suddyvich1]

Great video. Helped alot

[@pogigooo]

I can hear the the engines running from other aircrafts but are not there, how can I fix it?

[@giuseppeprattichizzo1862]

Why when I am approaching airports my pc start to lag? I have a gtx 1060 with a I7 8700, I use medium detail..

[@DarkKnight-bi7cr]

Awesome video thank you. One question if I do not tick the “Draw Park aircraft” will x life still work?

[@SimulationChannelDeluxe]

X-Life is independant of that option. X-Plane's Draw Aircraft option should be unticked when using X-Life.

[@ruslamp2838]

There is this bug where a beechcraft is stuck under some flying airplanes noses. Does anyone know how to fix this?

[@vinaysaran]

Sorry but I'm stuck with this "VIDP airport is not X-Life verified! Please use menu and check verified airports Map!" .. Please help

[@jrd20240]

Hi, the folder gns430 does not appear in my directory. What's wrong?

[@cwa4584]

Will it still work fine if I don’t have the latest navagraph installed

[@SimulationChannelDeluxe]

Yes it will still work. X-Life comes with its own nav database.

[@cwa4584]

@@SimulationChannelDeluxe wow this is amazing ive literally already spent hours just watching the planes takeoff!

[@ericminvielle624]

Hello, very good, but the maps on your site web don't working.

[@MrSameeg]

Thank you for taking the time to show us from installation to actually starting the plugin. Can you tell me if the AI aircraft show up on the default map and or Little NavMap

[@SimulationChannelDeluxe]

Hi and thanks! No, the AI aircraft will not show up on the default map or any external nav tools.

[@MrSameeg]

@@SimulationChannelDeluxe Thanks. Shame when I'm on XP11 and online/multiplayer in my Virtuall club I can't see my mates on the ground or in the sky (Cheers).

[@custom6537]

Hello SCD! I was wondering if you would give me any advice about this issue!.... with free X-Life v4 in Zibo 11.51 I can hear the planes and everything but i dont see the planes moving. I get error messages related to many differetn planes that cant load. Looks like some kind of trouble with some library. Thanks in advance and Greetings!

[@MrScott_e]

Thank you for Another excellent Tutorial. How would you say this compares to Real World Traffic and World Traffic?

[@prachuryyabaruah6551]

I used both and WT3 is shit overrated. Eats FPS and the atc is bare-bones compared to X-life pro. X-Life felt more refined in terms on airport movements.

[@MrScott_e]

Ron Baruah, thank you your feedback. So many options It’s good to hear from fellow swimmers who have actually used the products offered.

[@SimulationChannelDeluxe]

Unfortunately I never tried out World Traffic, as I purchased X-Life Deluxe way before WT3 released and I've been really happy with it. Thanks for watching! :)

[@RevilloMusic]

So I bought the deluxe version, is it normal that the AI traffic doesn't talk and also the pilot's voice is not hearable? At LSZH I get weird taxi instructions, missing taxis, also it doesn't show, which runways are in use. That's a bit odd for me. I do have the LSZH scenery. All I want is ATC that works, AI traffic that reacts to my plane, and that ATC works for me and AI traffic with all voices hearable. Seems like this is not my final solution.

[@SimulationChannelDeluxe]

Yes all you said is true. No pilot voice, AI chatter. Regarding taxi routes, all airports that I tried out were working nicely. Can't comment on LSZH now though. Cheers

[@86abaile]

You've convinced me to buy the deluxe version.

[@SimulationChannelDeluxe]

You can also see the X-Life ATC in action in nearly all my XP11 flight videos and livestreams ;) Cheers

[@rexmarnell8123]

ive followed this step by step and while i can hear the aircraft i cant see tthem, have the bluebell packs installed as well

[@rexmarnell8123]

so now theyre at the gate, but i see on radar planes landing and taking off but i cant see them visually

[@naijapilotxmax6006]

Thank you for this. But sir very few African airports? will i get more airports if i buy the deluxe version?

[@SimulationChannelDeluxe]

Indeed there aren't many African airports covered unfortunately. Also buying X-Life Deluxe doesn't increase that number, the airports covered remain the same.

[@totally61306]

what happens when you skip the navdata thing?

[@cabbincabbincab]

I tried to use X-Life this week after reinstalling X-Plane and all the traffic is completely random. There's Finnair A320s at LAX and Air Malta at MEM. I have the Bluebell XL packs installed already. Do you know how to fix this issue?

[@SimulationChannelDeluxe]

I didn't use X-Life for ages. It might be an issue with it in general, or it might be scenery dependent.

[@Kreemerz]

do they have a version of XP12?

[@drug2]

Ich hab mir auch jetzt Xlife 4 geladen und alles so gemacht wie du aber bei mir sind alle Flieger weiß. Hin und wieder ist einer dabei der dann ne Bemalung hat aber 99% sind weiß. Was ich halt nicht weiß ist ob XLife beim starten automatisch geladen wird oder ob man es jedes mal manuel starten muss. Zudem wenn ich diesen GNS430 Ordner, den es bei mir nie gab, erstell und da den aktuellen AIRAC 2005 reinpacke, stürzt Xplane beim starten von XLife sofort ab Beim start von XP11 sagt Xlife auch immer er nutzt die Daten 1201 oder so. Die Basics die halt dabei sind nicht aber den 2005. Scheint er gar nicht zu erkennen

[@thomasvinkie1353]

Hi, maybe a stupid question but can you also fly the planes that are included in x-life? Like the md-11 or a380.

[@thomasvinkie1353]

@@EricT637 Oh, ok thanks!

[@Mulberry2000]

how do u install the nav date u did not show it, just assumed we all know

[@duqidong9686]

Does x-life work with airport that are not in the map

[@dofenbeltran]

can i ask?how to fix icant see the aircrafts

[@Hi-mt3lp]

great tutorial! next time just please show how to add the GNS430 in navigraph because it doesn't appear automatically, for me I had to add it manually through the add-on mapping tab :)

[@SimulationChannelDeluxe]

Thanks! Yeah I thought about it but I didn't want to ruin my addon mappings lol. If you do the automatic scan for XP11, then the GNS430 navdata should be added to your addon mappings also. Cheers

[@Hi-mt3lp]

Simulation Channel Deluxe thanks 🙏 makes sense Also for some reason I can’t see the x-life plugin in my plugin menu for some reason, I’ll just try again

[@MattR336]

It reads my nav data and I can hear a plane firing up, why can't I see any aircraft? Does rendering, Vulkan or any settings have to do with it? I do not have static aircraft on and have tried using a few different airport that I didn't do any scenery for. With or without scenery, same result. What am I doing wrong? Thanks! XP11 through Steam with latestest Vulkan.

[@SimulationChannelDeluxe]

Might very likely be an issue with Vulkan. I think I read somewhere that the aircraft models aren't yet compatible.

[@shaunjacob1190]

I did whatever u did but then when i tried clicking on the plugin option its showing nothing at all, its completely empty. Please help!

[@SimulationChannelDeluxe]

Are you using the XP11 Vulkan beta?

[@ЭтотпареньАди]

Hi, I have a problem. Every time I put I my own waypoints or import it from a text file and send it to atc it keeps giving me errors. How do I fix this problem? I am also using x life v4(deluxe).

[@SimulationChannelDeluxe]

Yeah one has to be very careful with the txt flight plans to not get errors. Let's assume departing EDDL and arriving EGLL, the txt file must be named EDDLEGLL.txt. The content is EDDL SID *the route* STAR EGLL. For the route I would suggest simBrief. When you have direct-to waypoints without airways, there has to be a DCT between them. So for the EDDL-EGLL it is: EDDL SID MODRU Z717 GOBNO UZ717 MAS UM617 SOGRI UL608 SUMUM L608 LOGAN STAR EGLL For KDTW-KEWR for example it is: KDTW SID ESSBE DCT SLT STAR KEWR

[@ЭтотпареньАди]

@@SimulationChannelDeluxe thanks a lot for the suggestion. It worked for some but not for all flight plans unfortunately

[@shodancat1000]

I read there's a way to auto generate ground routes for airports that aren't included, but I can't for the life of me find out how. Any ideas?

[@SimulationChannelDeluxe]

To be honest I'm hearing that for the 1st time. Afaik ground routes for X-Life can only be created via the (not so intuitive) included Editor.

[@shaanfliesplanes]

Really sad it doesn't work for me. For some reason OpenSceneryX is annoying

[@thesimulatorguy7013]

Awesome

[@talharazi8741]

My planes show up as cars yeah it sounds weird but can anyone help please

[@pvarela65]

Hi, thanks for the well thought out tutorial. I've just installed the latest version of X-Life Deluxe in X-Plane 11.41. Everything works but the ATC window does not auto-hide even when the auto-hide setting is enabled. Did it ever happened to you? Thanks in advance for any tips you migh have.

[@SimulationChannelDeluxe]

I haven't been using X-Life deluxe for some months now, but with the version I used back then (v280719 I think) I never had that issue. With the mouse cursor not on the X-Life window it did hide after some seconds.

[@pvarela65]

@@SimulationChannelDeluxe Thank you for your prompt answer. Maybe it is a bug (or even a feature) of these new versions. I've posted the same question in the JARDesign forum. If I have an answer I'll post it here. Regards.

[@steveyford7127]

Can you add a voice pack? The standard x plane voice is a bit clumsy

[@SimulationChannelDeluxe]

Yeah X-Life ATC uses the default Windows speech synthesis engine. You might try installing different voice sets for that, but it won't improve by much I'm afraid.

[@ishtiyaqmakda-coffeelover3942]

Hi Simulation Channel Deluxe. I, today, have installed and run XLife for the first time and it went awesome on KLAX and KSEA airports. Everything was perfectly aligned on default XPlane scenery/airports. However, at OMDB (Dubai) I found a huge offset. I mean planes were landing and departing slightly off the runways. It was looking like the whole airport was moved slightly towards the left and thus some aircrafts were parked away from the gates and some were half way through to the terminal building and some parked on the roof of terminal :)). I then tried to installed OMDB freeware scenery from ‘Airport Maps’ on JarDesign webpage (as you shown in this tutorial) but nothing changed. Do you know how to fix this problem? Thanks.

[@SimulationChannelDeluxe]

Then the ground routes are somehow misaligned. It can be fixed via the Airport Editor, I might do a tutorial on that as well at some point.

[@ishtiyaqmakda-coffeelover3942]

Simulation Channel Deluxe Thanks a lot :)

[@tommysallstedt4122]

Thanks for a very usefull tutorial. I have a question, is it possible to import a flight plan from Simbrief to X-life?

[@SimulationChannelDeluxe]

I don't think so. X-Life uses its own integraded flightplan library that can't be extended afaik. Or do you mean the flightplan for YOUR own flight that you have to enter?

[@tommysallstedt4122]

Simulation Channel Deluxe Yes, if I like to flight from A to B. I often do my flightplan in Simbrief. Is possible then to import this flightplan from Simbrief to X-life,? BTW, I have now purchase the X-life de Lux and looking forward to use it. I blame this to you :)

[@SimulationChannelDeluxe]

@@tommysallstedt4122 Haha okay ;) Well there is no option to directly import the simbrief flightplan into X-Life, but you can just copy the flightplan string as text format (without SID and STAR names), paste it in a text editor and save the file as "DepartureICAO""ArrivalICAO".txt. Let's for example take a FP from EDDL to EDDH, the simbrief output looks like this: MEVE3T MEVEL L179 OSN M170 BASUM Z78 WSN T903 RIBSO RIBS4A. So the text file will be called EDDLEDDH.txt with the following content: EDDL SID MEVEL L179 OSN M170 BASUM Z78 WSN T903 RIBSO STAR EDDH. If there is no airway between waypoints, e.g. BASUM WSN, then you have to insert a DCT in between, so it reads BASUM DCT WSN. Then you have to put the text file in the plugins/X-Life/flightplans (I think it's called) folder. Then X-Life can access it from the ATC FP menu when you click "Import plan from text file". Hope it helps.

[@tommysallstedt4122]

Simulation Channel Deluxe Thank you very much for an very god and informative answer. This realy helps a lot!

[@MG-in2ks]

Hi great video. How heavy is this on frame rate?

[@SimulationChannelDeluxe]

For me very low impact, 1-2 FPS.

[@preachersawyer6925]

can we use this with livetraffic?

[@tatelehane5132]

Is this available for iMac

[@ruthlessadmin]

It seems like generic AI that doesn't need prior knowledge of the airport should be doable. I'm not a big fan of only having specific airports. I'm trying to learn how to fly small aircraft at local airports. There's only 2 towered airports I know of within 50 miles of my home town, and they're both tiny regional airports that won't be covered by anything like this.

[@SimulationChannelDeluxe]

Maybe check out Traffic Global, it's payware but covers nearly every airport on the planet, also with GA aircraft.

[@ruthlessadmin]

@@SimulationChannelDeluxe Thank you...I found LiveTraffic, which is free/open source and pulls data from OpenSky and others. So far works very well in my area, but can be a little derpy on the ground (doesn't always track the taxiways accurately, probably due to low resolution data).

[@grandslam4597]

Can I make it so I get the real aircraft? Because I was at Düsseldorf, and there were United 737s and stuff like that.

[@SimulationChannelDeluxe]

X-Lifes liveries are mostly fitting for the country/airport, but it's not always 100% perfect ;)

[@hansdampf178]

Ich kann scannen wie ich will, habe den Download Manager deinstalliert und neu aufgespielt, die X plane exe verlinkt, er scannt und findet nichts. Im Netz finde ich nix dazu. Was kann ich tun?

[@SimulationChannelDeluxe]

Was meinst du mit scannen? Verstehe gerade den Zusammenhang nicht sorry...

[@gorkemorhan1535]

Hello, I've just discovered you and ı really liked your Tutorial Videos. Could you make a video about GroundHandling? Thanks.

[@SimulationChannelDeluxe]

Hi and thanks! I might do a Ground Handling Deluxe tutorial as well at some point :)

[@gorkemorhan1535]

@@SimulationChannelDeluxe OK! Really appreciate it.

[@malcolmdavis7796]

Is there a discount offered for people who purchased the previous version (v3)?

[@SimulationChannelDeluxe]

X-Life v4 is a free update. You can remove the old version, install the new one and just register Deluxe again with the same serial number.

[@malcolmdavis7796]

@@SimulationChannelDeluxe Thanks for that. Great news!

[@gd_carb0n]

i have the deluxe version of X-Life and I really like the ATC solution it gives, however this plugin impacts my performance way too much so I don't use it that much :/

[@SimulationChannelDeluxe]

Are you running an NVIDIA card? Did you disable "Threaded Optimization"? This gives a big performance boost on my system.

[@gd_carb0n]

@@SimulationChannelDeluxe I have an Asus ROG 1060 6Gb but this is more of a CPU problem, my CPU is an i5 6600k and I have it overclocked at 4.2 GHz. It generally runs at 79% when I'm parked at an airport and 98% when I'm flying, and when I turn on X-Life it becomes nearly unplayable, I don't think there's anything I can do about it unfortunately...

[@Hi-mt3lp]

@@SimulationChannelDeluxe Where do you disable that??????

[@SimulationChannelDeluxe]

@@Hi-mt3lp It's a setting in the NVIDIA Control Panel and also accessible via the NVIDIA Inspector.

[@Hi-mt3lp]

Simulation Channel Deluxe oh right okay, btw I’ve tried everything and my x-plane can’t find x-life for some reason can you help???

[@prestonbryant4257]

Will I need to use atc when using this plugin to ensure I don’t crash into anyone?

[@SimulationChannelDeluxe]

When you purchase X-Life Deluxe, then the basic ATC will work with the traffic and also give advisories on the ground. I did never use X-Life free, so I don't know what happens without ATC. X-Plane's default ATC can't recognize the AI aircraft.

[@philipj.2169]

Do you need to download navigrath?

[@SimulationChannelDeluxe]

Yes, for updated navdata you need a Navigraph subscription.

[@philipj.2169]

@@SimulationChannelDeluxeAlright

[@Mulberry2000]

@@philipj.2169 THERE'S NO WAY I AM PAYING $10 DOLLARS A MONTH FOR BIT OF DATA, THAT IS $120 PER YEAR WHAT A SCAM - AVOID

[@shaanfliesplanes]

I keep getting a pop up message and it says please wait. How do I remove this? This is such a bad plugin! Do NOT recommend!

[@sirgen001]

Can you add planes, paints, and flight plans for ai?

[@SimulationChannelDeluxe]

AFAIK, unfortuntalely not. Flight plans for the AI will be updated when updating the navdata I think, but aircraft/liveries can't be easily added. Cheers

[@sirgen001]

@@SimulationChannelDeluxe That's a shame

[@Kreemerz]

When did they release this version?

[@SimulationChannelDeluxe]

Version 4 came out quite a long time ago, July 2018 I believe.

[@sksupply]

I received a message I need to install Open Scenery when I attempted to start X Life.

[@SimulationChannelDeluxe]

Yes, the OpenSceneryX library is also required and it's a must-have library anyway: 2:15

[@sksupply]

@@SimulationChannelDeluxe Thanks. Early here and no coffee yet. I missed that one. 😁

[@SimulationChannelDeluxe]

@@sksupply Haha okay no problem mate ;)

[@phoenixreport7899]

What if u don’t have navigraph or subscription

[@SimulationChannelDeluxe]

Then the addon uses its own, outdated nav database, but that's also not bad and can be used.

[@antoninocapizzi6458]

Can I use x plane's default airport scenarios?

[@SimulationChannelDeluxe]

Yes, but it's likely that the aircraft parking will not be perfectly aligned with the gates.

[@antoninocapizzi6458]

​​@@SimulationChannelDeluxe i saw that, and coul you repeat how can i fix that? My "airport editor" doesen't works, i'm using x plane 12, thank you

[@SimulationChannelDeluxe]

@@antoninocapizzi6458 It's best to use the recommended airport sceneries. Sorry but I cant help further, I dont have X-Plane installed anymore.

[@Haddetorp]

Vielen Dank für das Video! Habe xlife nun auch (Freeware). Am Startflughafen funktioniert alles, am Ziel lande ich alleine, es stehen keine Flugzeuge an den Gates bzw fahren auf den Taxiways, sprich XLife scheint da nicht zu funktionieren... was mache ich da falsch? Würde mich sehr über eine Antwort freuen, wenn Du eine Idee hast, danke! Gruß Andreas! (PS: Am Ziel funktioniert es, wenn ich es nochmals starte, aber ich dachte, es läuft automatisch - ich bin von Stuttgart nach Bremen geflogen, bzw Bergen Oslo)

[@SimulationChannelDeluxe]

Vielleicht weiß X-Life nicht auf welchem Airport du landen wirst und kreiert dort dann keinen Traffic. Hast du es mal mit dem (rudimentären) Flugplaner von X-Life versucht? Vielleicht klappt es nur, wenn du dort Abflug- und Ankunftsflughäfen einträgst. Grüße

[@Haddetorp]

@@SimulationChannelDeluxe Dankeschön, der Gedanke kam mir auch schon, ich bereite alles mit SimBrief vor. Also hast du das Problem nicht?

[@SimulationChannelDeluxe]

Ich nutze ja die "Deluxe" Version mit ATC, wo ich sowieso immer einen kompletten Flugplan einrichte, daher weiß mein X-Life auch immer wo ich landen werde. Ich hatte das Problem daher noch nicht. Ich würde es mal wie gesagt mit dem "Lite" Flugplaner von X-Life Free versuchen.

[@Haddetorp]

@@SimulationChannelDeluxe , jetzt hat es geklappt: Der Flugplan ist zu Beginn an xlife zu übermitteln, anschl. wird der Verkehr bis zum (einschl) Ziel generiert

[@SimulationChannelDeluxe]

Okay gut zu hören :) Grüße

[@PowerAirSimulations]

What kind of frame rates are you getting

[@SimulationChannelDeluxe]

As I said in the video X-Life costs me 2 FPS maybe. With complex airliners I usually get 30-40 FPS, you can see my hardware and graphics settings in the description.

[@PowerAirSimulations]

Awesome thank you

[@mr.vaggelis146]

DOes this work for x-plane 12?

[@SimulationChannelDeluxe]

I don't own XP12, so no idea.

[@fullypxid]

does work with xp12 ?

[@SimulationChannelDeluxe]

Sorry, I don't know.

[@strangegoat7382]

says 403 forbidden when i open the top link for the website

[@SimulationChannelDeluxe]

Same for me... I just googled for another link to X-Life, but there seems to be none. Maybe their website will come back, or they took down the project, which would be very unfortunate.

[@SimulationChannelDeluxe]

Actually, the forum link is still working where the plugin can be downloaded, so it's not as bad as I thought initially.

[@strangegoat7382]

@@SimulationChannelDeluxe yeah im currently using a different traffic plugin instead

[@Rowinu]

tell me it @@strangegoat7382

[@benediktkreissl5776]

How can I optimize x life to get the most traffic?

[@SimulationChannelDeluxe]

In X-Life's settings you can increase the air traffic density as well as how many airport gates are busy.

[@benediktkreissl5776]

@@SimulationChannelDeluxe thank you

[@ryanscannell2570]

when i turn it on, the planes dont show up

[@mortenhansen130]

Are you using Vulcan?

[@ryanscannell2570]

@@mortenhansen130 yes, and only on some airports it is working

[@mortenhansen130]

Ryan Scannell I had the same problem. Download the latest X-Life beta. It will be in beta until 11.50 get released.

[@ryanscannell2570]

@@mortenhansen130 Okay thanks I will try that

[@sageth3737]

where do i get the bbl packs

[@SimulationChannelDeluxe]

Clearly stated in the video, but here you go: jardesign.org/forum/viewtopic.php?id=4193

[@sageth3737]

@@SimulationChannelDeluxe lovely, sorry bout that

[@SimulationChannelDeluxe]

@@sageth3737 no worries :)

[@JoJayO]

hab 32gb ram und mach den traffic sehr low und trotzdem crsht der xp - any tipps ?

[@SimulationChannelDeluxe]

Das ist merkwürdig, hatte noch nie solche Probleme mit X-Life. Ist auch genug VRAM vorhanden?

[@JoJayO]

@@SimulationChannelDeluxe sorry my fehler für die hektik, passiert mir nur bei einem airport bis jetzt :D. ORBI in Bagdad xD btw vram graka 8gb :) du bist echt einer der besten tutorials maker bitte weiter so ich und viele viele andere feiern dich

[@SimulationChannelDeluxe]

@@JoJayO Wow vielen Dank Jo :)

[@itzsprly8616]

OH DONT SEE LINK IN DESC

[@Mulberry2000]

navigraph is damn expensive

[@urgedpanda]

Is he German? I’m hearing a lot of und instead of and

[@SimulationChannelDeluxe]

Yes I'm German, but I don't think that I used "und" instead of "and" lol

[@urgedpanda]

Simulation Channel Deluxe well maybe not und specifically but the accent was a bit heavy ngl

[@prestonbryant4257]

:)

[@centralcontroller6483]

Is bluebell payware (edit) nevermind

[@SimulationChannelDeluxe]

It's free ;)

[@МаксимВолодин-е3ь]

класс

[@МаксимВолодин-е3ь]

вы можете сделать urrp платов

[@Loilogamer]

german? :D

[@SimulationChannelDeluxe]

Yes.

[@millimustafa5729]

Hallo Liebe Grüße, funktioniert Jardesign auch mit Xplane12

[@SimulationChannelDeluxe]

Da kann ich leider nichts zu sagen, da ich XP12 nicht besitze. Grüße und danke für's Gucken :)

[@millimustafa5729]

@@SimulationChannelDeluxe Jederzeit und gerne.

[@roseesethorndike2877]

286 Torphy Street

[@MacDonaldLisa-e2i]

71557 Harber Mountain

[@mohamedsinan1425]

Why is my game not detecting the plugin? I do not see plugins like Better pushback, X life in the plugins menu..please help

[@SimulationChannelDeluxe]

Everything installed correctly? kzbin.info/www/bejne/o6W1haaljbmHjLs

[@mohamedsinan1425]

@@SimulationChannelDeluxe yes i did install according to the tutorial

[@waynesweet8275]

When I file the Flight plan with ATC and import it to the G1000, when I click on the G1000 the X-Life window disappears. How do I restore it?

[@LinakoS_Official]

why when the plane takeoff the xlife disabled?