Single Action Army - Colt Vs Standard Manufacturing

This is a table top review and comparison of several Colt Single Action Army Revolvers and the modern offering from Standard Manufacturing. We will start with a brief history of the SAA and then move through a point by point comparison of the two revolvers. Thanks for watching!
MarksmanTV is a registered trademark owned by Marksman Shooting Sports, LLC. It offers its content to its viewers free of charge. Content shared on this channel is distributed strictly for informational, educational and entertainment purposes only. MarksmanTV encourages its viewers to follow all state and Federal laws. Nothing MarksmanTV publishes should be considered as legal advice.

[@TUCOtheratt]

I've owned a 1st and 2nd Gen Colt. Both had an action like a gravel truck. I think they're way over hyped. I've bought several Pietta GW2 in recent years. Some are very well made for 1/4 the price of Standard Manufacturing.

[@johnqpublic2718]

Thank you for the breakdown. I think I'm just now entering the phase of my shooting and collecting "career" where the older tech is more and more appealing. I learned a few new things about Colt SAAs.

[@RooftopKY]

Love my Standard Manufacturing SAA. 7.5". It's just like yours but with the one piece grip. I found it at Buds next to a third gen Colt. Side by side, there was no comparison. I shoot it a lot, mostly black powder. Great video.

[@larryduttry9400]

Colt was not using MIM parts when those were made in the 50’s since that technology wasn’t around yet. The Colt at that time was in fact all machined the same as the Std. The newest version of the Colt does in fact use MIM and cast parts. That being said.. MIM parts are 97% the density of a forged part and are an alloy steel the same as the frame. The standard is definitely a higher quality product as far as fit finish and materials. They and the USFA are definitely phenomenal firearms.

[@brianmoore1164]

I have a Standard Manufacturing Single Action and I am very pleased with it. I went with the 4 3/4 inch barrel and it is a joy to shoot. I really appreciate their adherence to the no mim policy and the old school school firing pin.

[@AdamosDad]

I worked for a company that made powder metal parts (mim parts) the metal is heated to the point that it becomes steel at 2300 degrees, then pressed at high tonnage to form a part. These parts can actually be stronger and cheaper than a machined part.

[@nunya1328]

There is no comparison. The Standard blows colt away! 10 times the detail and quality and time put into the Standard.

[@wolfpack4694]

I have a uberti SAA 7.5” 7th Cavalry replica and really enjoy it, especially since my father and I were in the more modern version using helicopters in place of horses. It goes well with my Cav hat! Garry Owen! Wish I could afford a Colt or Standard.

[@scooterbob4432]

Last week, a nice friend gave me a new Uberti 1875 Outlaw in 45 Colt. Its quite accurate hitting metal discs at 25-35 yards and recoil is quite manageable, too. I'm now thinking of getting a Uberti Cavalry or a Cattleman in 45 Colt naturally, the only way to go. BTW, thanks for this informative video.

[@mannyfox8089]

Thanks for your service sir! Enjoy your Uberti SAA

[@lesliemiller5980]

I own the Old model P SAA from Cimarron Arms. It has the screw retained base pin, bullseye extractor and internal parts made in USA and shipped to Italy for assembly. The gun is then sent to Texas to be hand fitted and finished, all the edges and milled areas are eased and smoothed. It's an exact copy of an 1873 Colt made by measuring an original Colt except for the grip screw. I ordered mine in 44 Special. I think it is equal to either of those firearms.

[@anthonydennis460]

The grips on first generation CSAA revolvers are made of gutta percha. Gutta-percha is purified, coagulated latex obtained from trees of the genera Palaquium and Payena. Dentists used that material for filling teeth after a root canal.

[@ironcagedragon]

I had been considering the Standard Manufacturing SAA 45 since 2020. After learning about the Colt 45 model and it's clones for a few years I found a 2nd Gen Colt 45 in mint condition in 2023 and bought it.

[@eulogio604]

Preciosa colección de está obra maestra de los armeros William mason y charles brickerhoff Richar ,el saa 45 , me e canta este video saludos desde España 👍

[@jims9249]

Great review and comparison. The Standard Manufacture is definitely well made and beautifully finished.

[@ronh5422]

Great information. Wish you had addressed the Bisley & Buntline Special variations.

[@tinman8518]

Great video Chris!! I thank you. SAA fan.

[@jimdavis9275]

This was great Chris!!!!!

[@ricktaylor5744]

Thank you, great review!

[@scottwilson1258]

The Best Video and Comparison there Exists so far on these Fine Revolvers! Thank YouM.T. I Have One Boys and It Is The Real Deal, sitsnext to my Colt saa and the STANDARD is Marvelous ! The Fit and Finish is Just Perfect!

[@BigLisaFan]

I stumbled upon a Pietta version of the SAA. 7.5 inch barrel, nickel finish, 38 Special/357 Magnum. 4 clicks on the hammer. Shoots at the 7-8 o"clock position with 38 Special, shortage of 357 so don't know about any changes to the target. It was reasonable which is why I got it. I like the longer barrel and the feel of what it would have been like to shoot one "back in the day". Thank you for an interesting video and the Standard Manufacturing version is beautiful.

[@nicholassteel5529]

Fabulously detailed …..👍

[@BillAlexander-cv6oj]

Nice Collection Beautiful Copies of Original Colts, I think the Grips you Mentioned that had the Rubber like Feel Were Made from What was called Gutta Percha..I collect Antique Cameras and some came with a such a Covering...Nice Informative Video....

[@AdamosDad]

I have a Beretta Stampede very beautiful color case hardened, it is in 357, I wish I had the old Colt SAA.

[@kevinshorter5861]

Thanks for single shots I like them too!!!

[@brianmcdonald3831]

I always enjoy the history of the SAA so thank you you gave gave a history like what you’d usually hear in a walkthrough of a factory walkthrough or something I’ve always liked SAA always seemed more mechanical than newer models so to speak and would definitely last longer compared to newer parts wise. Although as far as I know original colts didn’t come with plastic grips because there was no such thing before 1900 even in the early 1900’s I know they used them on cap guns for kids in what the 1940’s probably the earliest in that era I know of but never heard of any colt original colt from before 1900 with plastic grips and gen 1 should be as said before 1900

[@JohnDoesItAll]

The bluing on the STD is incredible ❤

[@operator001]

I would love to have a Colt SAA. Now I'm thinking I should go with Standard MFG since it seems I can buy one right now. Plus its made in the US. I do have an Uberti and it does the job.

[@thomascrowe3407]

In the works on a contractor special .27 Hilti shot revolver tradesman's special!

[@jessicasimp4459]

And also, you can try to do a history and development episode on the FN Minimi / M249 SAW because nobody has ever done one here on YT and because of the history behind the SAW being very overlooked.

[@user-qi9et3iu9x]

The Standard Manufacturing WILL NEVER have that horse on it. Enough said 😊

[@TXGRunner]

I have two USFA single actions, both 5.5" bbl in 45 Colt. I have an offer on a Colt 3rd Gen Cavalry FSS in 44-40, but I also have an opportunity to get a Standard Manufacturing nickel 44-40. I am torn.

[@scottscheuerman8714]

I have the tools to turn the barrel so I can get them to shoot center it’s much easier to shoot if you only have to sight up or down to get on sight besides having to use Kentucky windage

[@joeguzman3558]

The only problem i have with standard manufacturing company is they only offers 45 long colt and not 357

[@tornsflores4222]

Please feature a Colt 7 1/2 inches 38 cal "officer's model"swing out cylinder

[@Shazamg6]

Is the standard saa worth the money?

[@wonkachocolates6133]

This was the most informative review I have seen on SAA revolvers. Please do a shooting comparison between generations’ & Std. Mfg.

[@christopherfranklin972]

I believe that the Gen.1 grips are 'gutta percha'.

[@sandraherdman3783]

Mark how long g did it take to get those hands 😮like they are ,Wow Excellent presentation 😂

[@Chiller11]

He uses a hand model for the close ups.

[@seandimond8609]

2 Gen SAA ended in 1974.

[@tannstang]

The grips on that first gen Colt are made from Gutta percha

[@jessicasimp4459]

Speaking of revolvers, my most favorite revolver is the Colt 1877 Lightning because that’s the gun that makes the faster firing of guns possible, according to R. Lee Ermey’s quote “The next step for gunmakers is to get them to shoot faster.” from the Pistols episode of Lock N Load. As the 1877 Lightning can do single or double action, it’s equivalent to a modern assault rifle that can do semi auto or full auto.

[@mikea.6608]

Im good with my Heritage Barkeep 😂😂

[@JMGeranimo]

Colt is falling behind and its sad. Ild love a saa , never in stock. Either make a top break might be a game changer

[@cashesclay9863]

What!! A brand new Colt from the custom shop is listed at 1,799.00 right now on colts website..... not 3grand. A brand new colt SAA is the same price as the standard.

[@MarksmanTV]

I am on Colt's website right now and their SAA order form indicates a base starting price of 3400. Can you please send me a link to where they're selling them for $1700? Thanks!

[@cashesclay9863]

@MarksmanTV Im going to call colt in the morning, inquiring minds want to know lol. Your colt SAA knowledge is way above mine, but I've looked again and again it's all over colts website at 1,799.00. It's my dream gun so I gota know lol

[@hogstooth5048]

Update? On pricing ​@@cashesclay9863

[@mikepurdy3952]

There are No More COLTS - There are CZ's now... 🤦

[@GeorgeTaylor-hb9jp]

They are not Colts. I hat says it all. There is no substitute.m

[@rapl1183]

I’d argue that Standard Manufacturing makes a better SAA when compared to the 3rd gen Colts (not including custom shop.)

[@mrbee145]

Colt is superior and real. The rest are posers