Single Action Only Conversion VS Double Action

[@craigmiller8902]

This gunsmith makes a great video! He knows his craft well and I benefit from what he has to say. This gentleman is the real deal and I appreciate his videos!

[@mikebaxter5875]

Keep up the informative videos. After I install the stiffer safety spring, I will make my decision on a single action trigger for my 75 compact. Your video has truly in lighted me.

[@MrDilarius]

Mine is headed to you guys as soon as i get the labels for shipping, can't wait. Thank you sir !

[@MrTom1701]

Thanks for sharing! Very informative. I was always wondering if I "Needed" the single action trigger conversion, now it makes more sense. Don't need it, especially for carry.

[@9452000]

I would also like to see a video of polishing internals.

[@Tacotoosdays]

Mine is headed your way in a couple weeks. Can’t wait!

[@MrMountain707]

Great Video. I love the honesty.

[@sandlotpass]

Normie’s opinion ~> opinion CGW’s opinion -> fact

[@spacep0d]

Does the Single Action Only package for the Shadow 2 reduce the trigger reach? I would assume so based on single action I've experienced already. You Guys Cajunized my SP-01 and it's fantastic. Now I'm looking to convert the Shadow 2 to SAO (range gun). Thanks!

[@irelandsailor]

I agree and share his opinion.

[@gouldayheem7344]

Yes definitely a vid on polishing internals 😃

[@RUSH_E431]

I installed the pro kit but I don’t have the guts to install the SA only kit - yet. I have it, sitting on my bench.

[@Slider101]

I put yall's parts in my first SP01 and cranked about 30,000 rounds through it shooting production in USPSA. .1% from master with it. I bought one for my wife, who decided she is a single stack woman and didn't move to the new gun. So the old stock gun is coming to yall for a red dot cut and slide cuts. The whole gun is getting refinished. I knew coming into your video that I wanted to make it SAO.....but now I have a few things to consider. Still leaning SAO.... Can yall make the safety surface more aggressive?

[@DieselMech]

I gotta love a gunsmith who tells you the downsides before you make that kind of mistake.

[@erictharp6095]

Nice video,,,i have a heritage 22 single action. ,,can you convert it to dual??

[@onpsxmember]

@Cajun Gun Works Would it be difficult to have a DAO conversion kit of sorts? That only cocking manually is an option but the slide won't cock the hammer?

[@grosnain]

is there a kit to convert black powder 1858 remington to double action ? it only leak a way to pull the hammer.

[@roul3688]

So the CGW Standard Package with an SAO trigger will have the same pull weight, travel and reset distance as the Standard Package without an SAO trigger?

[@Jeff-mv4yy]

I have a S2 DA/SA. The pre travel on the SA trigger is longer than I’d like . Would you be able to reduce the SA PRE TRAVEL if my pistol were converted to SAO?

[@TS-td4tw]

Is it possible to turn a Remington R1 enhanced into a double action?

[@flyfishing101]

Agree, either SAO with MS, or DA/SA with a decocker. My CZ 75 SP01 is DA/SA with a MS, is it possible to modify the safety to make it work both as safety and decocker, like HK USP and Arex Zero?

[@TheExplosiveGuy]

Nope. Unfortunately it's one or the other, the design can't accommodate both. And if you didn't know, you _can_ convert your DA/SA SP-01 to SAO by removing the disconnector, that's all there is to it. Though you will need to (at minimum) install an adjustable SAO trigger to set the stroke, and ideally a Cajun Gun Works SP-01 standard package trigger kit as well to eliminate trigger creep and reduce pull weight among several other enhancements. You can also remove the firing pin block plunger and delete the associated lifter arm (there are three options; cut the bottom leg off the FPB lifter arm with a grinder, remove the lifter arm and install a wide sear, or swap out the lifter arm for a spacer) to make it like the shadow series like I did with mine, my SAO SP-01 has a .060" thousandths trigger reset distance after removing the FPB system, and combined with the CGW SAO standard trigger kit it shoots like a $3000 race gun, with a 1.8 pound trigger pull. Food for thought😉.

[@robertswager5220]

What is the reason for putting one of your hammers in a p01

[@ap71chevss]

If a P01 Omega is changed over to Manual Safety, can it then be converted to SAO and have a good trigger with barely any take up and barely any reset?

[@adams.4352]

Does the disconnecter need to be removed when installing a single action trigger conversion on a DA/SA shadow 2? Thank you

[@cajungunworks526]

The gun can technically work with the disconnector still installed but we don't recommend it. Eventually it will cause problems.

[@adams.4352]

@@cajungunworks526 Perfect! Thank you for the reply.

[@vee_grave]

Please put up a tutorial of the reach reduction kit and reduced power return spring installation.

[@cajungunworks526]

That is on the agenda. In fact our intention is to have an installation video for each of our parts kits.

[@LarryeWhite61]

Is it possible on a CZ 75B that is DA/SA to make it DA only?

[@steven3379]

So what needs to be done on my Beretta 92x RDO Compact to make it SAO? Just add a straight trigger?

[@Joerifleman]

Would you be able to put a safety on a SP-01 Tactical and make it single action only?

[@cajungunworks526]

It can't be converted to a safety model. The SAO trigger will fit the gun. We just don't recommend it (or perform that conversion in our shop).

[@cadeclouser8903]

If I convert my CZ to single action only, do I then have to rack it every time I shoot?

[@davidstein3994]

No

[@metalshop7492]

Useless