SiriMoto Trunk Brace Install - Honda Civic 2012 2013 2014 2015

[@CL0WNS3R]

These are great, I have the Ultra Racing 4 point front tower strut and trunk brace on my 15 si sedan. Handling is a major upgrade!

[@xLu7VaTiiCx]

Are you running stock suspension? I am planning on getting the Sirimoto strut bar first and will possibly do this second. Do you see a noticable difference?

[@xLu7VaTiiCx]

I like the lower tie bars also but I'll probably do front and rear last. I love my 15 si sedan👍

[@XGen_23]

Mine just arrived and thanks for the info.

[@MGOD92]

Might be buying this soon

[@Lalo_Runs]

And The Award For Best DIYs Of 2015 Goes To Rudy From ProCivic!

[@procivic]

+Edward Peralta Thank you! I will gladly accept this award in Rudy's honor! ;)

[@huhproductions6124]

So for when drilling the bolt hole for the 2012 should I have the bar mounted and bolts fully tighten or leave the bolts a little loose? @procarstudio

[@DoubleCupRacing]

I would personally tighten everything up. Then drill using the bar hole to align the bit as a template. Tightening everything down will help ensure there is no movement or play when drilling.

[@shermanmerman4944]

@@DoubleCupRacing that’s a really good point. I’m about to install one and didn’t think of that. So thanks!

[@EightyLoon]

what kind of hardware is it

[@Acolis]

How do I get the hardware thing out of the void? I dropped it and can't event feel it now.... I feel like this could have been designed a lot better.

[@procivic]

I'm sorry to hear you lost your hardware, but I think you'll have success using a magnet to retrieve it. We've had a couple other customers do this. The hardware is required for the bolts to lock in and stay put. If you have other questions or concerns, please email into [e-mail].

[@Acolis]

Its lodged in there and cant move. I tried for about 40 minutes using my fingers and a piece of wire and couldnt even get it to budge. The magnet was less than productive as well. Is there any chance I can get new hardware because I dont think theres anything I can do to get it short of cutting a section out of the frame.

[@procivic]

We can definitely help with this situation. Please email [e-mail] with your order number for further assistance.

[@doctajuice]

Same problem. Literally all they had to do was make the stem like a half inch longer so there's enough room to hold onto it while you fiddle around in there.

[@parshenyousefi3895]

i have dropped the hardware in there i cant get it out. so you guys ended up leaving it in therev?

[@parshenyousefi3895]

how would you get the red piece out i dropped in there ???? any suggestions

[@kareemestwani2400]

magnet?

[@antdo]

Do they make one for the 8th gen civic si?

[@procivic]

As of right now, there is no trunk brace for the 8th gen. I apologize for the inconvenience.

[@nigelbradford5878]

would you recommend installing both the sirimoto trunk brace as well as the sirimoto phase 2 strut bar or would you just need one?

[@procivic]

+Nigel Bradford It would help to strengthen both ends. Putting only one would strengthen that side only

[@breezyproductions9039]

Do you have this for the 2016 Civic?

[@procivic]

+Breezy Productions At the moment we do not. We are currently working to release more chassis upgrades in the coming months. Keep an eye out for more upgrades as we release them.

[@ALEXRICAN21]

i was wondering if you guys made a template of where to drill a hole for the 2012 civics and one for the cuts on the truck liner if she can you email me the info please

[@procivic]

+alex de leon Unfortuantely we do not have a template for this. However, once it is mounted with the other bolts, you will be able to see where the last hole needs to be drilled.

[@hawjmimchannel2929]

i have the strut bar install so which one is the better choice between trunk brace or front lower tie bar?

[@procivic]

+pob tsuas Lor I would recommend the trunk brace first. This will help keep things balanced. Otherwise, the front will be stiffer than the rear. However, it is entirely up to you on how you wish to upgrade your civic.

[@hawjmimchannel2929]

Ok Thank you

[@iandubria6906]

I want this to my 2016 Camry V6

[@xxkazu78]

Do it! I put this on mine with a front strut. Is still a boat, but you'll notice the improvement straight away around corners

[@juanambriz9438]

if I buy this and go to you guys would you install?

[@procivic]

+Juan Ambriz Unfortunately, we are not setup for customer cars. We mainly work only on our test vehicles. Sorry!

[@giovannienziso1688]

will this fit only the si model

[@procivic]

+giovanni enziso no, this will fit all trim levels

[@JayCBR1100xx]

Same mounting locations as a 12-13 coupe (pre-refresh) as well?

[@procivic]

+Joseph Coates It is, but would require a hole to be drilled on the left (Driver side) top mounting point.

[@TheNorthernDrift]

What is the cheapest reliable strut brace for a civic ek hatch 98?

[@procivic]

+TheNorthernDrift Please have a look at some of the options we offer on the site: www.procivic.com/pages-main_pg/category-69_178/suspension-strut-bars.html

[@TheNorthernDrift]

***** Thanks

[@manhhungle3224]

Yes or no you??

[@wingzer0639]

Does this fit on 2015 Si Coupe?

[@procivic]

+Michael Magsino Yes, this will fit both the sedan and coupe models

[@mhelbay7999]

were u can order this part???

[@procivic]

On our site: www.procivic.com/pages-product_car_part_info/category-69_178/product-2932/index.html?+phase+2+chassis+braces

[@Orange-yp9bl]

Only in RED...?

[@procivic]

+Qezt Nest That is correct, this brace is only available in red

[@leocardoabraham6780]

Do this think will fit for my acura ILX?

[@leocardoabraham6780]

*thing

[@procivic]

+leocardo abraham We have not tested this on the ILX. We cannot confirm if it will fit properly as of right now

[@leocardoabraham6780]

+ProCivic.com it's possible to get full refund if that won't fit to my acura ilx ?

[@procivic]

+leocardo abraham Please review our returns policy for further details: www.procivic.com/pages-returns/index.html

[@SelectionOpinion]

It does