Thanks I’m going to use this when I hook my trailer up to my golf cart
@3DOutdoors10 ай бұрын
Thank you.
@mickodonnell8902 ай бұрын
Great inspirational video. Been looking the last couple of days for ideas on a box exactly like this for my caravan. Although we have different connectors it's the same thing, so I'm now creating a list for my next wee project!! Cheers and greetings from Scotland 🙂
@seymourscagnetti141310 ай бұрын
Great design. Well thought out! I will be building this for RVs. There is usually a 12v battery on the tounge. So, just clip on to the house battery and you are good to go.
@3DOutdoors9 ай бұрын
Thank you.
@RustyGlovebox2 жыл бұрын
That is a valuable tool. Save you a lot of trouble and time before a trip.
@3DOutdoors Жыл бұрын
For sure.
@girlmastergeneral2 жыл бұрын
Wow! Saved me $200 bucks on a commercial product! Thanks a million!
@3DOutdoors2 жыл бұрын
Glad it helped!
@nenengalma Жыл бұрын
great sharing electrical connector sid good job sharing idea
@3DOutdoors Жыл бұрын
Thank you.
@LipstickNsofrito2 жыл бұрын
Great idea! Thanks for sharing this with us...have a blessed day🤗
@3DOutdoors2 жыл бұрын
Thank you.
@nathangraham_clips2 жыл бұрын
Idk why - but everything is better with some nice switches - cool box :D
@3DOutdoors Жыл бұрын
Thank you
@Bits-of-Bytes Жыл бұрын
I like it. Nice and simple. I believe you could put a simple 2 pin 12v blinker relay in-line with each of your right turn and left turn switches and end up with blinking lights.
@3DOutdoors Жыл бұрын
Thank you.
@joecnc3341 Жыл бұрын
Great video! Thank You!
@3DOutdoors Жыл бұрын
Thank you.
@buzzsah2 жыл бұрын
Good idea, can even be used to wire a trailer.
@3DOutdoors Жыл бұрын
Thank you.
@PlayNewApp2 жыл бұрын
Hello, my friend. 🤗 💕 Awesome upload. 👍 Have a good weekend. 😘 ✨
@3DOutdoors Жыл бұрын
Thanks for visiting
@TheMrbombastic138 ай бұрын
Hi, I'm interested to build one and your design is simple and effective. Is there a need for a fuse in the box if there is a short circuit somewhere in the trailer?
@jeffaschbacher33342 жыл бұрын
Great idea, thanks for sharing.
@3DOutdoors2 жыл бұрын
Thanks for watching!
@BOHEMIANHUNTINGCLUB2 жыл бұрын
Nice job on that, that would definitely be very handy!
@3DOutdoors Жыл бұрын
Thank you
@7eis9 ай бұрын
Made a similar one but for European 13 pin. Also made a vehicle plug tester from 4 compact rear light clusters (2 bulbs 2 LED, this is needed because some vehicle electronics don't play nice with led but might work going with bulb) and separate bulbs for conductors not used for lights. Long cable so I can troubleshoot from the cab - the long cable is connected to the lights with an old school pvc connector strip where I cut down the surrounds for the screws so i can clip on to them. Has a cigar lighter cable to add a known good ground. Test everything from the drivers seat
@3DOutdoors8 ай бұрын
Thank you.
@mdmelbourne60762 жыл бұрын
Thanks for sharing this Dan, Great idea 💡 👍
@3DOutdoors Жыл бұрын
Thank you.
@train49052 жыл бұрын
Exellent build sir
@3DOutdoors2 жыл бұрын
Thank you.
@JohnAmes2 жыл бұрын
That is very cool my friend big like 👍
@3DOutdoors Жыл бұрын
Big thanks
@TeamTerrill2 жыл бұрын
Wow this was very informational... Awesome share!
@3DOutdoors2 жыл бұрын
Thank you.
@mikeydipaolo5912 жыл бұрын
@@3DOutdoors Would this work on a 53' semi trailer?
@TommyMillerVlogs2 жыл бұрын
Awesome Sauce!! Left a big like!!👍 # 10 I need to make me one, last year I did 4 boat trailers and 2 16' trailers for my friends...
@3DOutdoors Жыл бұрын
Thanks 👍
@COJ.Island2 жыл бұрын
Wow super cool project ❤️
@3DOutdoors2 жыл бұрын
Thank you.
@mikecox5700 Жыл бұрын
How does the brake test work? I would like to make this, but need to set an adjustable timer on the brake circuit so when it is on, the brakes will engage with the electromagnet every 3 to 4 seconds and then disengage. If you spin the wheel while the axle is elevated, you can test the brakes if working correctly.
@3DOutdoors10 ай бұрын
Sounds good.
@mikecox570010 ай бұрын
I built my own several months ago, thank you! kzbin.info/www/bejne/fmrJZ2Z_qNuHldk
@TommyMillerVlogs Жыл бұрын
Rewatch, Brother!! 💯👍
@3DOutdoors Жыл бұрын
Thank you.
@TommyMillerVlogs Жыл бұрын
@@3DOutdoors Welcome!!
@nicolacristi2 жыл бұрын
great info
@3DOutdoors Жыл бұрын
Thanks for watching!
@mitchelldavey12352 жыл бұрын
Hi there just wondering where do you put the + and - on the battery to the switch cheers
@3DOutdoors2 жыл бұрын
Most switches have an indicator, but they are simply a devise that opens and closes a conection.
@BB-ls8ms2 жыл бұрын
Hey Dan. Great video! Followed your instructions. Tester showed box was working, now it’s not. Any ideas on why it would work after set up and not now? I haven’t even hooked it up a trailer yet. Could I have done something ti burn out the switches?
@3DOutdoors2 жыл бұрын
The first think I would do is take my tester and hold the negative side on a battery, so you know you are getting grounded and then check at each switch to see if you have power to them. I am guessing that you have either a bad connection on the positive someplace or the ground ended up coming loose in the trailer connector or on the clip you are using to hook up to your battery.
@BB-ls8ms2 жыл бұрын
@@3DOutdoors Hey Dan. Switched out the switches to a marine style with lights to see if there is power at the switches first. They all came on now won’t come on again. I’m definitely missing something. Is there a way to send a photo to show you how I have it hooked up. Should I have a fuse or something? Maybe I burned two sets of switches out?
@marshallalice63162 жыл бұрын
I see he didn't add fuse blocks so if you have a grounded light no fuse to save something getting burned up
@robertjohnson8219 Жыл бұрын
@@marshallalice6316 looks like a fuse on the red line off the battery
@TommyMillerVlogs2 жыл бұрын
Stop by to show some love and support!! 💯👍
@3DOutdoors Жыл бұрын
Thank you
@poormansstack2 жыл бұрын
Nice to have.
@3DOutdoors2 жыл бұрын
Indeed!
@CraigSiderio11 ай бұрын
I'd like to see a better diagram of the wiring. It would better explain how the running lights are on when the brake or turn signals operate .
@3DOutdoors10 ай бұрын
Thank you.
@gustavooliveros6394 Жыл бұрын
How do I get the turn signals to flash on and off? I bought a relay flasher and it doesn’t do anything.
@3DOutdoors Жыл бұрын
Don't know, I didn't put a flasher in mine. I just use the switch, if it comes on with the switch it will come on when I use my turn signal. I am just testing if it works.
@Pyro1705911 ай бұрын
If your lights are LED, a regular flasher will not work because the LEDs do not pull enough amperage.
@nicolacristi4 ай бұрын
pretty intersting)
@3DOutdoors3 ай бұрын
Thank you.
@WaynJul2 жыл бұрын
A quick way to test your bulbs and wires.
@3DOutdoors Жыл бұрын
It sure is.
@barntt2 жыл бұрын
Like any DC powered item this needs about a 3Amp Fuse in the POS+ wire going to the battery to prevent a fire or shorted out connection from burning something up! Come on Man! LOL
@3DOutdoors Жыл бұрын
Thank you
@ObelixMagnetFishing2 жыл бұрын
Even if I no longer drive a passenger car or an 18-wheeler, it is actually very easy to check your lighting, which also saves you the necessary fines. And the fines you receive today are not cat piss (Dutch expression) in other words, it can cost you a fortune these days. Share your finding here and there