Sketchup #23: Multiply & Divide

[@moderntouchfurniture]

Excellent video 11 years later, amazing. I'm using this on almost every drawing now, thank you sir.

[@steven_yt4271]

Dear Michael, it's you that make register for youtube, I follow your tutorial from bilibili to your channel here and I'll continue to support

[@tufan31]

making a stair was a total torture before, thank you

[@reneeenglund498]

OMG, thank you! No other SketchUp tutorial shows you the info in the measurement box, they just say it and go so fast, you have such a nice voice pace and actually show the info you type in to make the tools work. You da best!

[@ab8calderon196]

You deserve youtube award of the year. TNice tutorials video truly nails it! Very well explained... The way you cut the bullsNice tutorialt and get straight to it..

[@zuhairamali2124]

THANK YOU SO MUCH FOR THIS TUTORIAL. So crisp and clear... May God bless you..

[@tugbakaya2978]

i've been ssing around on a friends soft soft for years, finally bought it. I found your videos and instantly subscribed and have been

[@matthewyandle2805]

after a few dozen tutorial videos, both by SketchUp and individuals, you are the first one to mention keyboard short keys for the tools. Combine that with the fact that you showed me how to multiply objects for framing renderings and you are now my favorite person.....sheesh....its hard to find good tutorials these days. Thanks for the instructive video, you've earned a subscriber for sure, and i look forward to watching all your old videos and waiting for new ones :-)

[@blacksebastian2]

It doesn't multiply in a strange way. You have the original and you multiply it by 5. The total will be 5. That's including the original. Like 5*1=5 as it always was and is. But I agree it can give an confusing impression. Good video. Among many, in my opinion, the way you explain things (in all of your tutorials) makes you one of the best. Very clear and understandable. Thanks

[@theadhdhandyman]

The move tool + option to copy is a game changer! Will add hours to my life

[@10Endless01]

i dont get it, where/what is option??

[@danoive]

It also works for rotating an object too. Like drawing say a bicycle weeks spokes. You draw now spoke rotate it 10 deg or so then hut X36 and it will make a 10 deg rotation 36 times.

[@naterz-j2v]

Awesome tutorial explaining each step and press of a button, Thanks heaps!!

[@harwoodpodcast]

@myownstarbucks I checked into this and it looks like there is a bug or they have disabled it in the current version. I"m having the same problem. A good workaround is to divide based on the number of segments you want, then measure one of the segments manually with the tape measure. - Cameron

[@dribrahimbadwy4897]

I’ve watched hours of videos and tNice tutorials one is the first that explains it in a way a complete beginner could understand! Great video

[@aldriansahwisnu4027]

Wow, so well done! Thanks for posting, man! Very helpful.

[@adeladel-pl1bx]

great job pro, respect from algeria.

[@johannes-kulvarlomp1833]

I started making soft recently, I was wondering if you wanna do any features.

[@KowboyUSA]

But how can this help with timber framing where the centers of my studs have to be spaced at specific distances?

[@meruem9360]

Will start to learn it tomorrow, lets be patient pips! Godbless us haha

[@cordovabay1]

following your tutorial exactly but can't get the division or multiplayer function to work. I get the "Invalid length entered" message every time. My slab is grouped and the banister is a component. Any ideas why this is not working. Oh yeah I try to do this in the Sketch up Pro trial version

[@CHMedia88]

+Reto Marti try grouping instead of making a component

[@primynarvaez737]

how would you insert a half note in the channel rack

[@Casey6996]

hi can you please explane what the option key is i'm a beginner and need to put post at 4 meter distance over 200 meters x 4

[@realrapcristao6654]

handy for resetuping s or creating karaoke tracks. Thanks for the recomndation!

[@sajit63]

If you look at the operation as a multiple copy command, the 5 nos that it creates is correct. The first copy is not a separate copy command

[@TsangStudio]

Your show has been most helpful. I do have a problem with my "divide command". I get the red squares when I right click on the line but I it is not showing me the dimensions such as 6 equal spaces @ 3'-0" (it used to show that info but for some reason it disappeared). Can you tell me why and how to fix that?

[@balancanega4042]

For so wierd reason when I try to use the GMS it just make one loud noise..

[@TheKlickitat]

Great video. BTW it is counting the spaces between the object and not the objects themselves.

[@Casey6996]

Hi It sound good the way you explained but what is the option key? i am very new to this and use Sketchup 2020

[@dannboy1783]

I have the same question did you find out??

[@Casey6996]

@@dannboy1783 on a normal pc it is the Ctrl key and on one of those expensive apple things it is different

[@erikajaneanota2839]

again where/what is the option tool? can't seem to find it :(

[@mauricioandrestiznadoroman3460]

Very nice explanatory video!

[@abdulwalial_khawlani8680]

Thanks bud! great video and instructions.

[@kamboza85]

thank u very much it saved a decade of hours spent on that :)

[@earlward5059]

Great video. Saved me a ton of time. I don't get the criticism. Nor do I get twenty comments explaining "5 fingers, 4 spaces". One comment on that issue was plenty.

[@sreypov1681]

Does knowing how to play softal tutorial necessary?

[@alkeeholick]

"M" for the move tool I got that.....what the hell is the option key? (3:57) !!!

[@FluffyMonsterPup]

The option key seems to be the ctrl key on my keyboard. Not sure if its the same for everyone?

[@ArriGaffer]

Option key is on a Mac. Essentially the same as the Control key on a not Mac.

[@THEKILLER-yh2iw]

same thing here

[@shemregpala5023]

1 (copy) *5 = 5 (copies). I hope this clears some confusion. Kudos to this video tho, very efficient.

[@ijuresic]

can i use this on circle objects like draw spokes on bicycle tyre? Or use it on a spiral path or similar...?

[@laidroxs]

You are a legend, you helped a lot and you explained it really great!

[@iWillProvEm]

Is this feature only usable on straight lines or can we also use this to follow on curved lines or surfaces?

[@iteteboluka7614]

How can I get the commend follow along the path in the model

[@freedamandem]

Where's the Option key on a Windows computer?

[@plummetplum]

It would be cool if for example you had a curving staircase and it could add the verticals in up the spiral. Is that possible?

[@noeldoyle2477]

On a PC running windows what or where is the option key?M on the keyboard gives me the move command but where do I go from their? (Can you tell I am new to Sketchup 17)

[@mohamadnurfiqribinazmie6329]

God bless you; busy works soft has notNice tutorialng on tNice tutorials. I feel more comfortable from watcNice tutorialng tNice tutorials in mins than I have ever before.

[@dgb5820]

Please amend your instructions Hold the left mouse down and ctl key at the same time than release

[@phoenixcz8608]

How do I switch off the "make group" ??

[@nickkaz0783]

my fav and tysvm for this tutorial it was helpful❤️

[@paulsomtoochukwu8158]

Good day, I have a component file that I normally import whenever I want to design but what I need is for the component to become part of the sketch up file that I can easily edit

[@bharattaxsolution6997]

bro i am not getting any tracks into my soft how is that possible

[@gamalielcotto2668]

Emmanuel Chukwunonso don't worry. When I first started setuping I felt the exact sa. Just keep ssing around with a DAW and you

[@ptick16]

Thank you for the post. It was very helpful. I do have a question about another scenario though. Let's say you were using a round post instead of a square post. How could you accurately set the distance from the edges as you did with the square post, before increasing the amount? I am not able to measure from the edge of the floor to the edge of the round post, and have no idea at what distance I am. With a square post, this is not a problem. If my measurement is not equal between the two end poles to the edge, how can I adjust that while keeping the spacing between all the poles the same?

[@ptick16]

Okay, I figured out my problem. I deleted all of the posts that I had previously made. I then increased the decimal count for more precision. From there, when making my circular post, I learned it's very important to enter that number manually after starting the circle. It is near impossible to set a perfect number with a .000 reading using a regular mouse. I did group my floor first, as you suggested. After I had the diameter circular post that I wanted, I checked to insure that it was centered. It can be tricky to check these measurements because you have to pretty much begin from the middle area of the object you're measuring from, which may look like the wrong area to begin with. Once I figured this out, putting down distances to check for centering was easy. In my case, I wanted my posts to go through a length of the floor. I hid the floor, and then used the push/pull tool to get the length that I wanted, and immediately grouped it. After that I made the floor visible again. From there, it was simply following your instructions on how to move, copy, and multiply. I'm still having only one issue I that I haven't quite figured out yet. After I've entered the amount of posts that I wanted with the multiplication sign, I scrolled out to get a better view of my project, and my object was deselected. I didn't click on anything else as I wanted to be able to change that number if needed. If my number was off, I had to first delete what I had added, and enter a different number. Nothing too difficult, but it would be nice if I knew why my object keeps getting deselected when scrolling out with the mouse wheel to get a better view. Leaning a little more, bit by bit. Thanks again for your videos.

[@harwoodpodcast]

@MrGiejose Yes you can. It works really well.

[@welmance]

Awesome, helpful, and well explained. Just thought I would mention: SketchUp is multiplying and dividing the length or space between the first two objects, not the number objects. That's why the dimension box still says Length. In a row of objects, there will ALWAYS be one less space between objects than the total number of objects. That's why it's "off by one." :)

[@roman2011]

Get to the point. Too much talking

[@TrevorDennis100]

thanks for the warning. I kept fast forwarding but eventually gave up.

[@dadou830]

tooooo much talking

[@bonimwathi]

Too too much grammar

[@bobmcnair7075]

Just as a thought, when you divide, you are dividing the length by the number of spaces there are between objects.

[@burcindevrim]

When you give the copy command by control+Alt move tool, the copying operation is not finiished yet, so you write *5 to multiply the objects. result is original+ 5 objects. I believe nothing odd in software. Thanks for sharing videos.

[@patmos72]

Great job. I should learn this years ago. Thank You

[@anels9761]

iam happy that i understand so basics

[@KaliLanderos]

does this work for lines too, like to divide just an edge .

[@flipbnit]

just another tip, you can use the multiply command, using, instead of *, the x letter, so, if you want 5 objects, after copying, type 5x and you get 5 copys (keep in mind that the first one, that was the first copy is included in this 5 number)

[@Abiationspotter090]

Thanks I wanna get into electronic soft.

[@shivbagga3645]

It was the sa for , In the GMS I switched the "Program" to "Analog app 1 TE"

[@warrenturner3987]

Thanks. I am fairly new to Sketchup. But I love learning and creating with it.

[@davorhaberkon5022]

Thank you man for sharing this stuff

[@dread7684]

You're the best at teaching with sketchup! :)

[@avexrex707]

hey buddy how can you type dimension's like 3 4/5 in INCH.... in dimension txt box!!

[@earlward5059]

Yes you can. 3.8 would be easier, but 34/5 works fine. If, for some weird reason you wanted 3 2/7, it would be better to use fractions since 2/7 is a repeating decimal.

[@davidbryan-z8b]

Instructions start @3:49

[@DukeLaCrosse20]

Have you ever tried "/0" ? Or "x-1"?

[@MrGiejose]

Can you use this on components?

[@jeanmarcoscondorborja3080]

That was great. Thank you.

[@stephenfish2278]

'divide by' is the 'total' you want minus 2 ( 1 for the 1st object 1 for the last object = the minus 2) You can also copy group objects. As an example I needed 20 shipping containers to fit a space with equal spacing, so as I copy the first container 'group' using ctrl (on pc) to the end location the 'total distance away including the spaces' The maths for that is easy too: in this example if I have an 8 foot wide container x 20 the total length of containers aligned by width is 160' wide then add the spaces which are also 1 less than the total. So lets say 19 spaces of 1' between each, the total would be 160+19 = 179', i would therefore type 179' after I select copy mode press enter then type /18 to fill the space with the rest of the containers. So to have 40 objects copy both and divide by 38. For a total of 10 objects copy both and divide by 8 and so on...To add spacing times the spacing amount by the total minus 1 and add that to the total width of the objects. hope that helps

[@7Darth7]

instead of think of making multiplies of an item the number you mulitply by makes the spaces inbetween the items

[@amaalkhan5617]

style I downloaded the demo to soft soft yesterday, and I'm going to learn from you to make my own stuff, and I wanted to leave tNice tutorials

[@jovemthunga9617]

The GMS setup does not soft anytNice tutorialng like the video does it lasts a lot longer and is a gritty soft and the soft coming from softex lasts

[@zabakhot]

What is option key ?

[@a-r-t7855]

Thank U Sir, I learn a lot from u..your explanations are very clear..

[@mrj335]

Hi this is very useful however I was looking for an options key on my keyboard and couldn't find one. So enter google where I discovered that you were using a Mac. Its sorted. An excellent tutorial.

[@SimonFabcic]

For Windows user is this Ctrl key. More here: kzbin.info/www/bejne/ppDdn3esi6-Gjrc&t=4m BTW, nice tutorial ;)

[@iteteboluka7614]

Thanks you very much, that was useful

[@misha6058]

or is it for soft pro or sotNice tutorialng

[@jojofabricante7742]

Thank you! This is immensely helpful!

[@basrover6544]

Too bad that function is not working anymore in Sketchup Pro 2017

[@prashanthkarkala467]

how to improve my attention span , I have good ideas and soft that I tNice tutorialnk up , the problem is putting it down in fruit loops and knowing

[@78モンガー]

Nice tutorial

[@butterfly12364]

the best G.sketchup tutorial!!!

[@hikarimomozuka]

This really help. Thank you so much 🥰

[@heliocamarotto2757]

You should have warned us that you are using a Mac. I kept looking for the option button for minutes!!!

[@Brainwave9048]

production. Thanks again!

[@trueleyes]

THANK YOU SO MUCH what a big help this has been for this BEGINNER lol lol lol Thanks again

[@T0hus_h]

for like 9 years do you know how i can change tNice tutorials?

[@9dechoclo781]

so much. Can’t wait to start making soft.

[@aa.gurdeepsingh-official]

Thx sir👍 keep it up

[@harwoodpodcast]

@welmance That's a fantastic way of explaining it! I'm going to use that next time I do a show.

[@dudester873]

Awesome stuff -- thanks for posting this! Thumbs up for you :-D

[@flixcracker]

I love it Sir can you help to edit

[@AA-zq1sx]

Great explanation - thanks!!

[@KAPNDDK]

nice easy to follow video thank you

[@mhamd2020]

wow this is really a fantastic hidden features thanx

[@eladyihie2502]

thanks man it was vvvvvvvery helpful and undrestendable thank you very much

[@angelesramoarq]

Your video was so helpful thnx, and yo hace nice voice.

[@Rjpbay]

Takes Ten Thousand Years.