Jewelry Casting with Resinworks3D EasyCast 200 and 400

[@guillaumeraby1379]

Friendly advice, use ball point tips and remove supports while your builds are still wet with alcohol. It'll be easier and cleaner with this resin :) Overall great and honest review!

[@SterlingKisses]

Great tip! I'll try that next time, thanks.

[@AntonioHinton-e9z]

Love the video.. if it's not too much to ask, could you demonstrate how to make a gold grillz using this method?

[@DarrinNoNAME]

No Need for Boric Acid mixture? So beneficial. I'm curious how the 400 series works with larger pieces. Edit: Oh.. Nevermind.. I should have kept watching before my question. it seems the 400 series works well for larger pieces too!....WOW..

[@youssoufbenkaouha9487]

Thank you so much for this video one question, please: The UV Light is special for some kind of resinsor it use for all

[@SterlingKisses]

Hello, and thank you. There's nothing special about the uv light. Any uv light source will cure the piece. The stronger the light the faster it will cure.

[@IVAN_ENT]

Nice video!

[@Dre_Kam]

Amazing Prints and great video! Couple Questions, What is the cleaning @ 9:35 and what is the gold pen like tip you apply to the bangle @ 9:45. Thanks for sharing and cheers!

[@SterlingKisses]

Thanks! That is an electrocleaning process. It helps clean and prepare the surface for plating. The pen tip is a felt pen plating tip that has been soaked in a 14kt gold plating solution.

[@Dre_Kam]

@@SterlingKisses Much appreciated!

[@WalkingPureHeart]

Fantastic work! Love the Shroud pieces..you have wicked mad skills dude, teach awesomely well and are so inspiring..what you take the time doing is appreciated..thank you. *JMJ*

[@SterlingKisses]

Hey, thank you so much!

[@chrisb.233]

Hello, I love your videos and was wondering what CAD program you use? I am looking to get started in 3D designs and don’t know where to start. Thank you!

[@SterlingKisses]

I use a few different pieces of software. Check out rhino3d or Blender is a free option

[@chrisb.233]

@@SterlingKisses blender sounds like a good place to start thanks 🙏

[@jorgeemiliano2035]

Fantastic

[@erdemokcuoglu6650]

Beautiful work and well-prepared, fun to watch video! Can I ask what is the liquid in 9:28? Thank you for this wonderful video!

[@SterlingKisses]

Hello, and thank you! That is an electro cleaning solution. It is a step that is take before electroplating to prepare the piece.

[@MogulDesigns]

Great content subscribed

[@matty5971]

Excellent content bro, that Bitcoin ring looks so 🔥🔥

[@matthewhoang5886]

With your experience, which resin do you think performs the best? I.e minimal shrinkage, high quality, little to no porosity. Mainly porosity has been my issue. Not sure how to address it

[@SterlingKisses]

I like the easycast 200 for the detail I can get out of it but both resins perform well. Sounds like your flask temperature might be too high if you are regularly having porosity issues. Could be an investment issue or problem with your burn out schedual too. Make sure your flasks rest for at least 4 hours after investing.

[@saimuddin5401]

I am facing the same problem porosity in Casting

[@ainnelrosirrosias3338]

Any clear improvement over the brown version? I have arround 50 percent left but recently my casting house doesnt cast them well. Was thinking mayve ec200 would be it. Thinking to replace brown with ec200

[@SterlingKisses]

I think the ec200 is better over all. The only thing to note is that it is picky about the initial stage of your burnout. If the kiln overshoots it could cause problems. If your casting house is having trouble with brown, then I don't know if they would cast ec200 any better.

[@pierrecatalan]

Bonjour avez-vous la courbe de température ? J'aimerais bien voir. Merci

[@SterlingKisses]

Hello, the heating chart can be found on the Resinworks3d website.

[@pierrecatalan]

@@SterlingKisses merci

[@yonray]

@Sterling kisses what software do you use for designing

[@SterlingKisses]

3ds max and zbrush

[@itailu]

thank you very much for your review. I've been trying to cast with: blue cast, power wax zero and another brand and Senertek all come out failed. I think I'll try this one. would you suggest going for the 400 even for small pieces due to the greater percentage of wax?

[@SterlingKisses]

EC200 is probably the better choice for small pieces.

[@itailu]

@@SterlingKisses I saw a vid where the 200 had some Residue unlike the 400. I wonder

[@SterlingKisses]

@@itailu it probably comes down to burnout. 200 is picky about the initial burnout temperature. My concern with using 400 on detailed parts is that it might be difficult to get a successful print on delicate pieces.

[@itailu]

@@SterlingKisses that’s a shame, I mean why can’t one resin give a solution for every kind of model. That skull ring had small detail and was big no? With all the waist of money, time and energy I had with the resins I used I’m starting to regret this adventure.

[@olegred.o]

hi just wondering did you try this resin? if yes how is results with this resin.me as well was trying bluecast x one,a lot of fails .

[@Miketz]

You can even see the printing layer lines at 07:11

[@omagro8267]

You do realize it got polished right? smh

[@Miketz]

@@omagro8267 I was commenting on how detailed the print was that it even reproduced the print layer lines.

[@Urbinas00]

Greetings, how much time did you allow to pass between the oven and the molten gold? I let the matras cool over time

[@SterlingKisses]

When the flask is taken out of the kiln I cast as quickly as possible. After casting I wait about 8 minutes before quenching.

[@Urbinas00]

@@SterlingKisses gracias, Thanks, I have been working with blurcast cr3a resin and I have bad results. a texture with holes and I don't know what to do, do you advise me to change to easycast 200?

[@ateliepontelli1873]

Hello Friend,Alright ? So from these 3 resins which do you prefer for details and casting. I use for jewelry. bluecast x-one Resinworks wax 200 Siraya Tech

[@SterlingKisses]

I'm afraid I don't have any experience with Bluecast or siraya. So far the 200 has continued to work well for me.

[@rameshguggila4823]

I want this resign. I'm from India . how to Bai it

[@SterlingKisses]

Hello, if you go to the resinworks3d website you should be able to find a distributor there.