Skill Assessment Explained - Engineer Australia

[@engineertalks0]

I was looking for this video I was worried weather my university course is accredited or not but now I found out the right way briefly explained hands up for you

[@sachinpoon786]

Hi...In total 10 years of experience can we show 3 years as fake experience for EA skill assessment because the employer is not ready to provide reliving letter and employer reference letter?

[@salihdogan4950]

Hello, I took my skill assessment report from civil engineer professionals on 04/2021. In that time, I have 6+ years experience but I now have 8+ years experince. For this reasons, I wrote an e-mail how to add this new experince my current report. I took answer but when I opened my current report Civil Engineer Professional I couldn't see a button to apply additional assessment. What's more, I took skill assesement report from enginner technologist on 03/2023. I see additional assessment button for this application. Can you help me for issue? Why couldn't I see additional assessment button for civil engineer professionals? Regards,

[@กฤษฎาหนูเอียด]

Dear Sir, your video is really helpful. It will be appreciated if you can help me this question. I graduated Bachelor in Electrical Engineering from Thailand in 2015. At that time, my country was recognized along with Sydney accord. However, Thai qualification has been upgraded to Washington accord in 2022. Do my qualification which I completed in 2015 is against on Washington accord? Thank you very much.

[@yuetingguo5835]

哈喽，你好，澳洲读的不用写CDR 的工程职业评估的CV， 可以跟平时的一样吗，或者请问你们有模版吗。

[@ChannelAMEC]

抱歉，我们没有CDR的模版哦

[@alishah864]

If someone has Washington accord degree and 3year overseas experience which pathway to choose? Does he need to write through CDR pathway or Washington accord pathway also allows to write overseas experience?

[@ChannelAMEC]

how many years did you study the washington accord

[@Metalhead00009]

I have a (4 year) Bachelor's degree from a university that is not accredited, and a (2 year) master's degree from a university that falls under the Washington accord. Is there a chance to skip the CDR pathway ?

[@ChannelAMEC]

No unfortunately

[@Dvlzpower]

Did you skip CDR?

[@Dvlzpower]

I got my bachelor from ABET accredited university but it is not in any records and i have a masters of engineering that is in Washington records. Will i need to CDR ?

[@ChannelAMEC]

No need CDR

[@Dvlzpower]

@@ChannelAMEC do you have any source to be sure? Or is it real scenario? Both my degrees are not from Australia.

[@GNGundam001]

Hi, I want to ask what this "*Although the above programs are accredited and recognised by Engineers Australia, ongoing accreditation will also be required by The Institution of Engineers, Singapore for full recognition under the Washington Accord." will mean for my accredition in other countries? Such as the US, UK, and Japan.

[@ChannelAMEC]

if your program is under the accord, should be fine

[@GNGundam001]

@@ChannelAMEC does this mean that I have accreditation in others countries but not in Singapore? And yes my program is listed under "PROGRAMS ACCREDITED AND CURRENTLY OFFERED AT THE LEVEL OF PROFESSIONAL ENGINEER WASHINGTON ACCORD"

[@ChannelAMEC]

@@GNGundam001 Yes! that will work

[@chowdhuryfaisalmahmud7765]

Hi, I have studied Bachelor of Energy and Power engineering from china. As far as i know china is a signatory of Washington accord. Do i need a cdr assessment.

[@ChannelAMEC]

if it is signatory, then no need CDR

[@marcosemiromoralesacevedo7490]

Hi, it is me again! I have applied for Mechanical Engineer, but AUSTRALIA ENGINEERs gave a positive skill assessment as PLANT ENGINEER, when I want to apply for the EOI and then the PR, is there a problem that my diploma from my bachelor says that I have done MECHANICAL ENGINEERING instead of PLANT ENGINEERING. Thank you very much, it means a lot

[@ChannelAMEC]

Follow whatever EA says

[@calvincoker1366]

Thank you very much for your step to step direction towards sending application. I am kindly asking that you help me out in preparing such reports. I mean structures. Thanks

[@abdulmuizz748]

I graduated (Bachelor in Enigneering) in Uni., that listed the Washington Accord (Japan JABEE) but I continued my study until PhD at the same university. Do I need to do CDR?

[@ChannelAMEC]

No～ as long as the bachelor was in Washington Accord, then no need to go for CDR. and if you are PhD, you may consider GTI, check it out: kzbin.info/www/bejne/fYXKXq16itpni9U

[@abdulmuizz748]

@@ChannelAMEC thank you so much for the explanation. :)

[@FelipeCondo]

Thanks for the video . I have a questions. I have a master in Mechanical Engineering from South America, is it listed in any of the Accord? thanks

[@ChannelAMEC]

You need to check

[@txh11658]

I graduated from metu and has a ABET. Do i need CDR report ?? Please help 😢

[@ChannelAMEC]

Most likely yes

[@lincyshanoj3780]

Hi sir,I graduated in 2007, completed masters in 2015, both from India,and having 7 years of experience as an assistant professor,and I saw that my country came under Washington accord,do I need to write CDR? Please help me and could you please help in finding my pathway

[@TheBibleAlive]

i am a Telecommunications Network Engineer for the past 8years but i have a degree in Computer science. Should i be accessed by the Engineers Australia since all my work experience is in the Telecommunications engineering field

[@ChannelAMEC]

yes! Engineer Aus suits you better

[@sourabhinutube]

Have you migrated to austrailia? I am also from same domain and it would be really helpful if you could share your exp.

[@eliasnajm7381]

Hello. I have a bachelor degree in engineering from Lebanon, which is not listed in either accord. But the university where I graduated from is ABET accredited, and ABET is part of the Sydney and Dublin Accord. The university got accredited October 2013 and I graduated February 2014. Can I apply for assessment throughout Sydney/Dublin accord or do I have to do a CDR? Thanks in advance

[@ChannelAMEC]

Yes needs to do CDR

[@eliasnajm7381]

@@ChannelAMEC ok thanks

[@feilxzhao8577]

Hello Sir, I am from China and my undergraduate degree is not in the above accreditation. I studied Mechanical Engineering as an undergraduate and graduated with a BEng (Hons). I am now a student at UNSW and am completing my Master of Engineering Science. I understand that the MSc in Engineering Science at our university does not offer EA accreditation. How do I complete my EA accreditation? I look forward to hearing from you, your response is very important for me.

[@ChannelAMEC]

YOu need to do CDR

[@seguflowerstv5782]

Hi, I have a Bachelor's degree in Electrical Engineering and I have my license in the Philippines. I have 16 years total work of experience. Can I take the standard competency demonstration report or do I need to take the relevant skilled assessment also from EA? Is standard CDR enough? What is the difference of the two? Thank you

[@navinbpalathingal]

Do we need to pay for "relevant skilled employment asessment " if we are not claiming points for experience. If we wish to do where is the option to upload primary and secondary documents regarding employment

[@ChannelAMEC]

Yeah you don’t need

[@navinbpalathingal]

@@ChannelAMEC i accidentally end up paying it, now I thought of claiming the points for it but where is the option to upload documents supporting it like..payment slip, itr etc

[@mtf3431]

I'm a network engineer did a advanced diploma with EIT should I assess with Engineers Australia

[@ChannelAMEC]

Depends on years of work experience

[@wen-yahlim3787]

I have a masters degree in physics so it’s not accredited, but I do have 7 years work experience as a materials engineer in the oil and gas industry. Can I get my skills assessed through the CDR route?

[@ChannelAMEC]

Sure

[@atitebiabdullah9997]

Hello sir, I am from Nigeria and a member or COREN in Nigeria (but not yet in any of the Accords), how do I go about the CDR, because you stated you have agencies that can help on the report guidance. Thanks and waiting for your reply

[@benittaxavier2344]

How can I get help for CDR prepration ?

[@samikstream]

What is the difference between tier 1 and tier 2 accreditation under WA accord? Do I need CDR if the institute is under UG - tier 2 ?

[@ChannelAMEC]

Probably

[@adnanjayousi6526]

Thanks for the clear video sir, I am licensed electrical engineer from Israel which isn't listed so I will pick the CDR option, can you please give a tips about which document to provide ? should I prepare electrical plans that i've reviewed and prepared as an engineer ? another question, if I considered to be a technlogist engineer, is it possible to become professional after a period of time ? or this rank will be eternal ? Thanks

[@ashishnarayan5252]

Hi, mind telling me whether Washington pathway can be used if the degree was done in a non signatory country but accredited under Washington accord ?

[@ChannelAMEC]

you may give a try

[@ashishnarayan5252]

@@ChannelAMEC not a helpful response

[@ChannelAMEC]

@@ashishnarayan5252 It is not helpful, as in general process to assess a likeliness of any visa related outcome, one would require comprehensive supporting documents to assess it.

[@ashishnarayan5252]

Okay let me elaborate. My degree is from Fiji ( country not listed as a signatory) however engineers New Zealand has come and accredited it. Do I go for professional engineer pathway or cdr?

[@ChannelAMEC]

@@ashishnarayan5252 CDR

[@CEOpaschal]

my brother studied Aeronautics engineering (Bachelor degree) and obtained a Masters scholarship in d same Aeronautics engineering course in University Of Adelaide (and has begun online class). Pls what chances does he have or need to acquire in order to secure a path to obtaining a Permanent Residency?

[@ChannelAMEC]

Chance is high, as long as he performed well

[@CEOpaschal]

@@ChannelAMEC is it true that he can apply for PR after his Post-study work permit has been exhausted? Pls what conditions does my bro, a current graduate Masters student (in Aeronautics Engr) need to know in getting a PR? Does He need a more than 2yrs work experience?

[@ChannelAMEC]

@@CEOpaschal It depends on the Point score

[@CEOpaschal]

@@ChannelAMEC ok thank you

[@CEOpaschal]

@@ChannelAMEC I am a graduate of Political science (BSc) and I also plan to join my brother next year in Australia (esp Adelaide) to do Postgraduate Studies in Public Policy or Political science field in general with d aim of becoming a Policy Analyst. I observed that in d Skilled Occupation List for South Australia, there is demand for Policy Analyst. Do I, as a Political science graduate, have a chance to secure Permanent Residency through this Postgraduate student visa route too?

[@pratikghavate86]

Hello Sir, I have got my EA assessment done for both education and employment for 5 years in Dec 2019, and now after 3 more years my points got auto updated for total 8yrs exp. Can you please guide do i need to take reassessment for updating my work experience to 8 years? as I have now received the invite basis the 8yrs exp points but have assessment of 5 years only.

[@navinbpalathingal]

Where we have to upload documents regarding relevant skilled employment assessment

[@RdmYoutubePeas]

Hi! What about Provisional Accredited Courses? I believe it is listed that Provisional courses is not eligible for Stage 1 Qualifications. Can you please confirm it? Thanks!

[@ChannelAMEC]

which uni and course you choose?

[@indersharma5540]

Hi Thanks for info where I can connect you regarding my cdr

[@ChannelAMEC]

We don’t do cdr for cliebt

[@benittaxavier2344]

Hai my college got Washington Accord after i passout from my college means can I apply through Washington Accord ?

[@ChannelAMEC]

Correct

[@THEJTS-v8y]

Mate it was an informative video ... I have a question... I got my master degree in Iran what should i do ?

[@ChannelAMEC]

Check out my other skill migration videos and tips

[@tolga1cool]

So essentially, if I do my master's in one of these unis it's going to be way easier to get approval?

[@ChannelAMEC]

correct

[@Niki_Chi]

Hello, my country Nigeria is not in any accord and I want to assess B. Eng. ( Civil Engineering). With over 10 years of work experience in my field. I need help with competency demonstration report kindly refer me to a great hand. Thank you.

[@ChannelAMEC]

So you need to do CDR

[@ropafadzomunikwa9046]

Can you please provide links for agents who can assist in writting CDR reports.

[@ChannelAMEC]

You may google it

[@sydjafer7909]

If he can google why the f.. will he ask u here . Are u serious?

[@Magdy_ismail1]

I got my master degree in Civil Engineering in University of Pécs ,Hungary ,My question I can't find any Accords does Hungary falls into ? or even any other European country ,Can you guide me ? please

[@ChannelAMEC]

Then you would require to go through CDR process

[@jenishvlogs7061]

Hey I had done my bachelor's in civil engineering from india which is not accredited by engineers Australia. But Now if I will do my masters in civil engineering from edith Cowan university which is in Perth and accredited by engineers Australia than what is my pathway of skills assessment?

[@ChannelAMEC]

Will still be in CDR, because all engineer skill assessments are based on bachelor. No matter what master you take

[@gaurav522chd]

hello, did you pursue your master's from Edith Cowan University? i am planning to join same university

[@harryhome86]

I do have the skill assesment, i am recognized electronics engineer member of EA , now i am trying to look for a job and it is so hard, am I doing something wrong, whoever wants to text me for adviced I can tell you how to fo the assesment. Thanks

[@ChannelAMEC]

What visa you hold now?

[@harryhome86]

@@ChannelAMEC I am partner visa I will be resident in 2 months,

[@michellengai9239]

I would like to ask,I graduated in the year 2008, but my country only signed the Washington accord in year 2009. Does it means I would have to do a CDR ? What are the chances of it being approved ?

[@ChannelAMEC]

Yes! then CDR is required

[@satarawy]

I am abet accredited? Is it different from any engineer who does not have abet accreditation

[@ChannelAMEC]

Could you kindly expand what abet stands for?

[@satarawy]

@@ChannelAMEC Accreditation Board for Engineering and technology and it's written in other recognitions

[@ChannelAMEC]

@@satarawy you would still need to go through EA

[@abiajis8506]

Hello sir. I have bachelor degree in Petroleum Engineering but after completing study, I pursued my career as project engineer (Not oil and gas field). Am I still eligible to do EA skill assessment and apply for PR (180,190,491) if my occupation and degree is not aligned? Appreciated for answering this matter. Thanks

[@jmjdeist]

So is the Migrant Skill Assessment an actual technical test or just a gathering of documents (work history/examples, references, etc.)?

[@ChannelAMEC]

Doc only

[@itmamabedin4146]

Thanks for the video. Just wondering is a course is provisionally accredited from engineers Australia, does he need to write CDR report ?

[@ChannelAMEC]

if it is credited, then should not need CDR

[@EngrArif-it6mv]

For overseas 10/15 years experinced applicant : Could u please let me know, in case of Skill assessment from Engineers Australia, do i also need to add Relevant Employment assessment? If i did not assess this relevant experience part, can i submit EOI and claim points? Or i need to again apply for relevant experience part as a additional service / secondary part through separate application? Please reply.

[@alaab614]

my course and my university is accredit by Washington Accord , do i need to do EA assessment ??

[@ChannelAMEC]

Yes, still need skill assessment

[@alaab614]

@@ChannelAMEC but no need for cdr which makes it easier and faster to apply

[@ChannelAMEC]

@@alaab614 if your course is under those accord, then CDR is not required

[@kwakuduah491]

PLEASE I CANNOT FIND THE LINK PLEASE SEND ME THE LINK

[@nnamdi9525]

Good morning from Nigeria, I want to verify something. I am a HND (Higher National Diploma) Mechanical Engineering from Nigeria and I have worked as a mechanical Technician for 3+ years with a 1 year training. Currently, I secured an Engineer position as a Mechanical engineer. Please can I work for how long with as a Mechanical engineer in Nigeria with my HND to be eligible for EA (Engineer Australia) skill assessment as an Engineer. Thanks.

[@ChannelAMEC]

you need to first check whether your qualification meets those international accord standard

[@nnamdi9525]

@@ChannelAMEC how can I check.

[@ChannelAMEC]

@@nnamdi9525 you may wish to contact your institution

[@marcosemiromoralesacevedo7490]

Hi, thank you for the video, it helps a lot. I have one questions, please, is there a problem or issue if I do not select what specialisation my career is? I am a mechanical engineer and I have 3 options Airconditioning Engineer, Building Services Engineer, Heating and Ventilation Engineer, I do not think that my episodes are related to any of them, Is there any issue if I leave it blank? Thank you

[@ChannelAMEC]

Those technical options, you should email EA directly

[@christianallen1024]

Sir, my degree is ABET accredited ( USA representative for the accords) but my school is based from the Philippines. What pathway am I in?

[@christianallen1024]

Philippines is not part of any accord

[@ChannelAMEC]

Then you need to head to CDR pathway

[@christianallen1024]

Even though my bachelor's degree is accredited by an accord signatory (ABET of United States)??? That's what I understand from their site's statement "Qualifications accredited or recognized by other signatories are recognised by each signatory as being substantially equivalent to accredited or recognised qualifications within its own jurisdiction". Correct me if I'm wrong. ieagreements.org/accords/washington/signatories/

[@ChannelAMEC]

@@christianallen1024 As long as your course was listed at Washington Accord Signatory , then its cool

[@christianallen1024]

@@ChannelAMEC thanks a lot!

[@mohammedanas9564]

Hi, I have done bachelor's in Computer Science and Engineering (4 years degree) from india and I don't have any experience but I have done few projects on technology whuch is based on VLSI. Can I go with Engineering Australia to get assessment ( Engineering Assessment)

[@mohammedanas9564]

Engineering Technologist

[@ChannelAMEC]

You should be categorised under ICT

[@bejoyalex1207]

This comment is for my daughter who had done M.S.in data Science from Monash University.Now onshore in Sydney working on Contract for Health Department.ILTEs 7 band score,Age between27&30.Tips for Filing for P.R Requested.

[@ChannelAMEC]

Right!

[@mohdkarimi4575]

Through CDR, both education and work experience are assessed? To put in another way, separate application is required for work experience assessment?

[@ChannelAMEC]

correct

[@arnilbardelosa2451]

Hi, good day to you sir, im license Electrical Engineer and license Elecrician recognized here in the philippines, gaining an experienced in construction field for almost 5 above from different country like saudi arabia, guam USA and 5 years above experience as production maintenance Engineer. What assessment or possible way for me to land a job in australia. You response will help me a lot.. thanks

[@ChannelAMEC]

You should go through Trade Recognition Australia, we do facilitate to lodge skill assessment, if you wish to engage on the service, can email us: [e-mail]

[@annamariadeleon479]

What If the course I am taking is not included on the list of engineers Australia Accredited program (e.g certificate/diploma related to engineering) I am a bsce graduate at non accredited/washington/dublin/sydney accord uni at my country.. can I still be qualified for the 1st criteria?

[@ChannelAMEC]

Then you need to do CDR

[@messithebestplaya]

Good morning Sir. I completed my bachelors in mechanical engineering from queen mary university of london. It comes under Washington accord and requires further learning. Im currently studying my masters in engineering (project management) from Griffith University Australia. My question is, can i use my masters from Australia as the required further learning for my bachelors? Its a bit complicated since both my degrees are from different locations. Please help🙏🙏

[@messithebestplaya]

My masters is not in the accredited list. My bachelors is in Washington accord list but requires further learning... My bachelors is with honours and it says on the website that if the bachelor is with honours, i can get IEng certificate without further learning. Is being recognized at IEng for pr purposes safe and secure? Please guide 🙏

[@ChannelAMEC]

Your bachelor will meet skill assessment requirement

[@messithebestplaya]

@@ChannelAMEC yes. The question for bachelor is, for Washington accord it says required further learning. So should i go with Sydney accord? And does sydney accord have same value to be apply under mechanical engineering stream? Thanks

[@ChannelAMEC]

@@messithebestplaya Either should be fine

[@patelsachin3209]

hy...i am sachin patel from India. i had completed engineer Australia skills assessment in mechanical engineering which was expired so can I renewed this skills assessment latter?.is it compulsory to make new application with the different projects?

[@ChannelAMEC]

yeah need to renew

[@patelsachin3209]

@@ChannelAMEC is it compulsory to make new CDR report ?.. when i had already submitted CDR in past exprired skill assessment..if renewal of skill assessment without make new CDR report,i have a humble request to you for making a video of full process..

[@ChannelAMEC]

@@patelsachin3209 Can be the same as previous

[@ikegboifunanyaloveth9938]

Is skill assessment needed for a partnership visa for an engineer?

[@ChannelAMEC]

if you want more points

[@shellwindersingh7843]

My assessment is going to expire in April in 323211 what can i do sir, not get invitation yet

[@ChannelAMEC]

renew another one

[@jonathonhoggarth6473]

How much does it costs if your degree is accredited under the Washington accord? Do you also have to submit over any report during the application? It's doesn't ask for it online.

[@ChannelAMEC]

if under Washington accord, should be the same as others and all you need is grad certificate + transcript

[@jonathonhoggarth6473]

Thanks for the prompt reply; I'm also trying to get my works experience accessed as an extra currently but my previous employer (nissan) is saying they wont give me a reference defining 5 cores roles that were job specific as they just don't do that. What the consequences of a generic reference from them?

[@ChannelAMEC]

@@jonathonhoggarth6473 wow! that's bad... then I don't think it is likely to pass...

[@jonathonhoggarth6473]

@@ChannelAMEC I know, I've raised it to their hr manager and reached out to my previous manager. Big corporations are a nightmare for this in the UK!

[@ChannelAMEC]

@@jonathonhoggarth6473 Not just UK... it's somewhat problematic everywhere...

[@sanjeetnepal8648]

Do I still need to do the skill assessment if I am already in Australia with student sub class or dependent visa and have full working rights? Thank you

[@ChannelAMEC]

Yes need

[@faizbahrin6570]

G’day sir. I’m finishing up my civil engineering program at Swinburne University of Technology Sarawak Campus in Malaysia. Which path am I eligible for the EA? Cheers

[@tezzniraula393]

For your CDR documentation, if you need any help, feel free to email me. Thank you. :)

[@ChannelAMEC]

probably can try this: kzbin.info/www/bejne/d4bNnYadgJ6Gors

[@manishkhanal3555]

@@tezzniraula393 plz send me cdr report for civil engineering

[@michaidnom2441]

I'm an industrial engineer. How can you help me?

[@ChannelAMEC]

we do provide services on Skill Assessment, our service fee is AUD$750 + EA's cost. Should you wish to accept this, kindly let us know

[@rumbidzainyatsine4188]

@@ChannelAMEC how long is the processing time

[@jenishvlogs7061]

Hey I had done my bachelor's in civil engineering from india which is not accredited by engineers Australia. But Now if I will do my masters in civil engineering from edith Cowan university which is in Perth and accredited by engineers Australia than can I assess my master degree of Australia only in which I don't need any CDR report for positive skills assessment or I still need my bachelor's degree somewhere in my skills assessment process in which I need CDR report ?

[@alvis3431]

Does it mean that after skill assessment by EA, my 3-year degree accredited by Washington accord only gets engineering technologist?

[@ChannelAMEC]

have you applied EA?

[@alvis3431]

@@ChannelAMEC not yet

[@ChannelAMEC]

@@alvis3431 You should apply and you would find out the reason

[@salithakaveendrananayakkar3262]

I have a Bachelor's degree in Electrical and Information Engineering which was accredited by Washington Accord and I have been working as a software engineer for four years. Should I be assessed by Engineers Australia or Australian Computer Society

[@ChannelAMEC]

ACS

[@mohammadkittaneh4540]

Thank you for uploading such a great video. I just have one question: I have a bachelor degree that is not accredited and from non accord listed country. And I have a master degree that is fully accredited by Engineers Australia and listed on the Accredited program list. I completed this master degree in Australia and the course is (CRICOS registered) as well. Can I just apply for the first pathway by submitting only the master degree? (In other words, which qualification they want it to be accredited, bachelor or master). Knowing that I will be nominating my master occupation based on the Australian master degree that I obtained. Thanks

[@ChannelAMEC]

No！ don't think so... I had client like you previously, EA will still require you to do CDR!

[@cdraustralia3267]

If you want to claim 15 points as a Professional Engineer or Engineering Technologist, you must assess your 4 years Degree from Engineers Australia. www.cdraustrali.io

[@mohammadkittaneh4540]

​@@cdraustralia3267 No you don't. Both you and Carl (Channel AMEC) told me to do CDR. Fortunately I didn't listen to either of you and got my certificate accredited in only 6 weeks. It is done I got my MSA :) Did it all by myself lol.

[@danielgabato3616]

@@mohammadkittaneh4540 So you submitted your EA accredited Masters Degree and went through the Australian Qualification Pathway instead? That's awesome!

[@josehnavedahaguirreh8727]

@@mohammadkittaneh4540 Hi bro, one question, did you claim work experience gained in your nominated (or closely related) occupation before getting your master's degree in Australia?

[@LeadershipImranKhan]

Thanks for making such a helping video

[@ChannelAMEC]

Thanks for your support on the channel

[@LeadershipImranKhan]

​@@ChannelAMEC I have Washington accord level-1 accredated degree. For sub class 476 visa, Washington accord level 2 degree is required. Can I apply for sub class 476, after my degree assessment under washington accord from Engineer Australia?

[@Xploring_Planet]

Hi, My father name mention in passport is "SITA RAM KOTIYAL" , However, in my Bachelor's degree " S R KOTIYAL" is mention. Does it effect my skill assessment from engineers Australia?

[@ChannelAMEC]

no, that;s fine

[@bakhtawarhashmi3518]

Do you need to get your work experience that you're claiming as Mining Engineer also assessed by Engineers Australia? I applied for Migration Skills Assessment with EA without selecting the option for assessing work experience as it was optional? I graduated from UNSW, Australia.

[@ChannelAMEC]

Nah~ skill assessment for engineer is not necessary to have work exp

[@amit8152]

Is NER (national Enineer register) and skill assessment same or different? If different then please explain what is NER. Thanks in advance

[@ChannelAMEC]

No, it's different. you need to go to Engineer Australia for skill assessment

[@amit8152]

@@ChannelAMEC what is the procedure for NER?

[@kalyanasamadhi644]

Hi,I'm willing to start my undergraduate studies in bachelor of Computer Engineering in 2023 So as a srilankan in order to migrate to Australia 🇦🇺 for a job opportunity or higher studies, 📍Do i definitely need to have a Washington Accord Accredited Computer Engineering Bachelor's degree?

[@ChannelAMEC]

Computer engineering should go to ACS

[@shirishrao3012]

I am planning to do my masters in engineering management which is a non-accrediated course from australia. Since australia is a signatory of sydney accord am i eligible for the sydney accord pathway?

[@ChannelAMEC]

Yes, as long as your bachelor was in Sydney Accord

[@kathleenramos5287]

Hi sir, I am a civil engineer with 2 years work experience in a shipyard as a consting enginer. Do I have a chance to pass the assessment considering that my previous job is not related to civil engineering?

[@ChannelAMEC]

Where about are you?

[@kathleenramos5287]

@@ChannelAMEC Philippines

[@muhammadmarudheni6078]

Thank you so much for video, your video is very helpful. Before, i am bachelor engineer from indonesia and It's just two question, i want to get job in engineer australian. What should i have for egibility engineering in australian? And then what should i do migration skills assesment on australian qualification?

[@ChannelAMEC]

Depends on what job

[@armleonelson838]

I have done my bachelor's in mechanical in my home country and planing to do my master's in computer system engineering from Australia...how does this affect my skill assessment..if i do mechanical related work after my master's can my skill be assessed or is it compulsory that i do work in computer system engineering for skill assessment and pr purpose...rply would be really appreciated

[@ChannelAMEC]

different skillset cannot count towards work exp

[@sArAhjEaN0143]

Hi! I'm planning to take masters in engineering and it is listed in the accredited courses in EA. After completing the course, will I still need to provide CDR?

[@ChannelAMEC]

if your bachelor of engineering was studied elsewhere and not within Dublin, Washington or Sydney Accord, then you still require to do CDR

[@sArAhjEaN0143]

@@ChannelAMEC If that's the case, do you think I should just pursue getting a working visa instead of a student visa?

[@ChannelAMEC]

@@sArAhjEaN0143 that's another way to go... however, work visa needs an Australian Employer Sponsor

[@Dvlzpower]

Any updates? They say you can do it using accredited masters only.

[@animeenglishdublv7779]

May I ask for the referrals of the CRD support firm?

[@ChannelAMEC]

Those we knew previously had all gone after covid hit

[@manishkhanal3555]

Plz send me format of cdr report?

[@ChannelAMEC]

I am sorry I do not have those format

[@zabardastikagyaanbardashtk6046]

I have a degree of Electronics & Communication engineering but I have 5 years experience of being an Electrical Engineer!! Can I do a skill assessment of Electrical Engineering?

[@ChannelAMEC]

Yes you can

[@raffiehydermirza1803]

India comes under which option to check the assessment of my engineering degree etc;

[@ChannelAMEC]

Hey, it's most likely to be CDR pathway

[@nandanakv3525]

are u in monash university now , Raffie ?

[@raffiehydermirza1803]

@@nandanakv3525 no, I studied in dhanekula institute of engineering and technology. Why so?

[@nandanakv3525]

@@raffiehydermirza1803It's Because..the agency which I refered to inorder to take admission to monash university said me about a Rafi Hyder whom they have send to Australia.. So I thought..It might be u.. Sry😅

[@raffiehydermirza1803]

@@nandanakv3525 no they are fake then

[@rajpalkataria9005]

Sir ....I am a Graduate in Mining Engineer from India and have international experience in India and Indonesia and presently working in Indonesia .....I wish to work in Australian Mining .....please advise ...

[@ChannelAMEC]

Get skill assessment done and find an Australian employer

[@rajpalkataria9005]

@@ChannelAMEC Sir ......kindly help me inregarding this to get a job there in Australian Mining as a Mining Engineer as my own child is studying there in Melbourne (Australia) since last 4 years and like this will be near to my child ...I am aiming like this ....

[@ChannelAMEC]

@@rajpalkataria9005 sure~ you may want to try www.seek.com

[@yurikeun9601]

I'm completing an engineering course (Bachelor of Engineering Science) in one of Australian Universities and my course is not listed on the 'Accredited course by EA'. In this case, should I submit the CDR? or should I contact to the EA and ask about the details?

[@ChannelAMEC]

which uni you in?

[@peterbeshay8752]

Hi, does Engineers Australia consider Ph.D. degrees for accreditation or only Bachelor's degree is considered?

[@ChannelAMEC]

It does

[@KaLam0502]

Hello ! I come from HK. It is good news my degree was accredited by WASHINGTON ACCORD in 1995. May I know if I still conduct skill assessment test ? Thank you so much

[@ChannelAMEC]

Yes, skill assessment is still required, and you need to submit your Washington Accord qualification

[@KaLam0502]

Thank you ! Actually, how can I get the Washington accord qualification ? In addition, if I have the accord qualification, could I need to submit the career episode after I get the qualification ? As for the evidence that I have 10 years above working experiences, may I know how to prove it ? Thank you very much for your help

[@ChannelAMEC]

@@KaLam0502 mmm。。。。 you might seek professional advice or service to assist you on this... or perhaps we can assist you

[@jhoncaisaralpuerto102]

Hello, I am from the Philippines. This video is really helpful to all of us who want to migrate to Australia. I have a question: I have a mechanical license in the Philippines since 2013. Can I push my application with the Washington accord? I am currently working here in UAE as an application engineer. My job is more related to 3d printing metal and plastic. Do I have a chance to get this Engineer Australia?

[@ChannelAMEC]

Is it washington accord?

[@mitchm8587]

I have a degree in Industrial Engineering with 4 years work experience. I graduated in a college listed in Washington Accord. Can I get Migration Assessment? Thanks!

[@ChannelAMEC]

yeah! Definately

[@dvness1580]

Hello. I finished Chemical Engineering, but my work experience for almost 10 years follows that of Chemistry jobs (i.e. Quality Analyst). Shall I apply for skills assessment for my education (ChE) or for my work experience as chemist?

[@ChannelAMEC]

Yes you should

[@dvness1580]

@@ChannelAMEC I mean, to which skills authority body shall I wanna apply for? The engineer one (as with my education qualification), or the chemist one (as with my work experience)? Kindly clarify sir

[@ChannelAMEC]

@@dvness1580 I think EA still be it... cuz going through vetassess... or perhaps boths

[@pelinsebboy5624]

hello, ı just read your comment and I am a chemical engineer as welll working in a relative job . so just wondering did you do the skills assessment or ?

[@muhammadtalha1611]

Hi, I have done 2 years of master degree in Master of professional enginnering in cyber security from sydney Australia. I want to apply for 491 visa. Do i have to asess my degree from Engineering Australia? My degree title is mentioned in Engineering Australia accredtion list but it is only have provisonal accredation. Can you guide me what do i do for getting my assement ? Do i need experince to access my degree

[@ChannelAMEC]

Cyber security is under ACS

[@kwakuduah491]

Please I cannot find this one Please send me your lin

[@olibatey2001]

Hi, I have served 3 years as a motor mechanic and have my 2nd year qualification. I am currently in the process of become a second engineer on a yacht (second engineer) working my way to chief engineer. What are the chances of me getting PR?

[@ChannelAMEC]

have you done skill assessment?

[@ayisharizwana7324]

Hi, Thanks for ur valuable info! I hve a doubt..my country is signed to the Washington accord in 2014 and myself graduated in 2015.My doubt is the course and university of mine is accredited in 2017 and it's validity is till Jun 2020..Am I eligible fa Washington pathway or document CDR ?? Pls clarify

[@ChannelAMEC]

well, looks like you have to do CRD, because your commencement date of the course/program, at that time, it isn't accredited yet and not with Washington accord

[@ayisharizwana7324]

@@ChannelAMEC thanks! It's of great help

[@arifjay_98]

Hi I don't want to migrate I just want experience getting job in Australia is it possible

[@ChannelAMEC]

yes! as long as you can find an employment here and been sponsored

[@arifjay_98]

@@ChannelAMEC I can handle the visa flightticket and all that even paying my own money for accommodation but I just want salary to work in Australia is it feasible. Cuz I just graduated in mechanical engineering at Heriot watt University Malaysia with 2nd class upper

[@ChannelAMEC]

@@arifjay_98 sure, you need to find an employer

[@arifjay_98]

@@ChannelAMEC alrite thanks

[@patrickadriandivino5797]

Hi Sir, good day. I'm a licensed Electrical Engineer since 2016 (here in the Philippines) but my experience since then is on telecommunications field. Am I still eligible to get accredited on Engineers Australia? Your answer would help a lot. Thanks

[@ChannelAMEC]

I think it would be quite hard

[@tezzniraula393]

@@ChannelAMEC probably I could help you. Feel free to mail me

[@levi0926]

@@tezzniraula393 i have also same experience, engineer graduate but diffent job experience

[@tezzniraula393]

@@levi0926 better you try for Engineering Technologist assessment then.

[@patrickadriandivino2422]

I really commented here 2 years ago where I had a hard time which am I taking in EA assessment. Now I am happily living here in Melbourne more than 1 year as a permanent resident. Don’t lose hope guys. If I did it, you can also do it. 💪🏼

[@jciiivisualization8552]

Hello sir can you do same content for the aspiring architects thru

[@ChannelAMEC]

sure

[@jayshah5949]

I have Bachelor's and Masters degree in Physics then I switched my career to engineering. Now I have finished my PhD in Civil Engineering from Australia. Will I be eligible for Engineering assessment based on PhD in Civil engg?

[@ChannelAMEC]

I think you need to go through CPD procedure

[@jayshah5949]

@@ChannelAMEC do you mean competence Demonstration report?

[@christinajasan9994]

"

[@jimmyvaidya]

Will salary cash slip is acceptable or bank transfer is required for assessment?? Pl guide

[@ChannelAMEC]

yes~ can be used

[@choemess]

Hi Karl, really informative content! Will I pass the skill assessment if I only have 1 year of work experience? I heard that we need a minimum of 3 years work experience to pass the skill assessment. I am a civil engineer with 1 year work experience and have 75 PR points without the work experience points. How likely am I to get the PR visa?

[@radykert9740]

I’m planning to study mechanical engineer in Aus for next year, and I want to know will engineering remove from skill occupation?

[@ChannelAMEC]

Not likely

[@ashlyelizabeth484]

Thank you for the great video. I have done my Mechanical engineering from India and my university is not in any accord. But I become a chartered engineer from ImechE UK and have 12 years job experience. Will my qualification be accessed

[@ChannelAMEC]

Sure