How To repair Your Electronic Hair Clippers Spring Attachment

In this quick video I will be showing you how to fix your hair clippers free using 2 methods. The most common issue is when the attachment separates from the clippers due to the spring inside breaking due to age or poor quality depending on what type you have. Had just finished cutting my hair and decided i would share how i get them to keep working when they try to quit. I hope this method helps you top get your clippers working again , especially good for when this happens at the wrong time. If you found the video helpful feel free to drop a like and subscribe for what comes next. Thanks for watching

[@Skillz1333]

This video kzbin.info/www/bejne/i6u6g3ehmdKZg9k is a lot more detailed if you just need to create the W spring in particular. Made that video to make it easier with a full explanation and walk through of how to create one. Due to the amount of request for it , I pinned it here at the top for visibility. Thanks for watching.

[@kiranrajput6665]

શષ

[@andreleonard8264]

Is there a video that shows how to reassemble the spring and blades on Ubeator hair trimmers? If you have one please post for me. The placement of the spring is causing me problems.

[@monzeral-mohamad6543]

​@@kiranrajput6665 a new

[@salahali9787]

Thank you 💖

[@flackojoydy2290]

Mines is not clipping in

[@lipisdiary1975]

You saved my life,I was trying for 2 hours and you...

[@qkurdii_]

Same 😂

[@NoorMuhammad-bt4jr]

@@qkurdii_ also same 😃🤭😄

[@mrwalker877]

@@NoorMuhammad-bt4jr same😂

[@choudharyvicky8910]

Same

[@mattsherer764]

Same🤦‍♂️ thanks bro!!!

[@McRamhard]

Multiple hours wasted because I was missing one simple step! Thank you, so much!

[@karinapaolalizasanchez6660]

Me Encanto estube today la mañana tratando de hacerlo hasta que encontre su video Me sirvio muchisimo

[@Jerel1221]

Bro, Thank you so much! I was taking mine apart and accident popped the spring out & thought it was a wrap. Your video saved me from going out and buying a new pair of clippers. Thank you man!

[@everythingchanel129]

I swear

[@mikkomammela7961]

Same here

[@rustyshackleford5830]

Bro you are a life saver. I didn't realize that the middle of the spring actually gets tucked further underneath the stationary blades. I've been tucking it at the bottom of the moving blade that it attaches to, and not getting enough pressure. I was ready to give up after like 3 hours thank you so much.

[@nbdrich6519]

Because of this video I was able to go to my 1st day at my new job presentable. I really needed a shave😅. Thanks man, this was very helpful because I have been trying to fix these clippers for a week

[@MirzaWaseemHassan]

same

[@ianburton9223]

Thanks for this video. Gave me the encouragement I needed to get the spring back in place after cleaning instead of buying a new clipper. One extra easing step I found was to bend the pointed legs upwards using narrow nosed pliers. This makes the insertion of the square part of the spring under the tab so much easier - it's a breeze. Then bend the pointe legs back down with the same pliers to apply the pressure to the cutting plate.

[@pravinraikar1260]

N😊😊😊

[@harrytindle634]

Great video. Saved my life! I borrowed this clipper from a friend and managed to pull the thing apart when cleaning. Now back together and working as was. Cheers!

[@dianestroud3402]

Thank you!! My clipper blade component just fell apart when I was brushing the hair out of the blades. I can usually figure out how to get things back together, but not this time. A search led me to your video. I couldn't have done it without you!! 💞🇺🇲

[@Alokkumar-xc2zz]

After losing 4 hrs , i watched your video and assembled it in 2 min. Thanks a lot

[@Deanio_1111]

Thank you. I was Zero Gaping, and finally putting them back together, but didn't want to bend the springs to force the moving blade in, but you showed me it's normal.

[@MrKentkand]

You genius! I was really puzzled how to make new spring. But you solved it straightforwardly!

[@johnnyvegas5681]

Finally a decent thorough review!! thank you! I thought I was asking for a miracle. So many horrible., mumbly, out of focus, incomplete tutorials out there.

[@marvinsewell8753]

Thank you!!! You just helped me fix my clippers and saved some money. Thank you!!!

[@bennarcher8803]

This is exactly what I needed. I used a screw in the end to push the square bit under..it was ripping my fingers to shreds! Cheers for this!!:)

[@reverendmarkdebrizzi]

THANK YOU with all my heart for showing this procedure. I just purchased a brand new razor and trying to change the head, the whole assembly blew up in my hand: the spring sending all the components all around the room...literally! I had it packed up and ready to ship back but FED EX won't pick up packages from my home. I was stuck for the $20 I spent on this razor. I haven't tried to put it back together yet BUT at least now I know how I am supposed to do it! The company itself was useless in this regard! Thank you so much.

[@agnesmainafacer2275]

Thank you!!! I thought ours was broken when the spring popped! You are a life saver 😉

[@johnrwegasira7052]

I appreciate it greatly, I made attempts for nearly a week with a group of friends but I was unable to fix it. But, after viewing only 3 minutes of this video, I managed to fix it by myself within one minute!

[@rayongeorge5193]

Bro you saved my life. I almost cried trying to figure out wtf to do. You’re the best

[@TrainDriverRob]

Excellent, Wifey dropped my clippers and of course that spring popped out along with all the other pieces!

[@Aleskoo100]

I was probably 5 seconds away from showing the trimmer how hard I can throw it against the wall😂 1 life of a trimmer saved

[@SilvermanMan]

Spent 3 hrs to fix by myself but finally I gave up and your video saved my day 😂

[@samndo30]

Wow bro u have saved me from throwing my machine. It has been in my drawer for the last 6 months i bought another one, but today its back its to normal. THANX BLESSED 🙌

[@simplyput5615]

THANK YOU!! Especially for showing how hard it can be to get them back together! ♡

[@MicahRoss-mh2pb]

My Man!! thanks for the vid. Almost had to go eat dinner with the fam with a half shaved beard.

[@yimizheng]

Dude you are a saint for posting this, i just fixed my husband’s clipper. Saved 60 quid!!

[@grantmadden1972]

You are the man, spent an hour or so yesterday working on this! Watched your video and fixed them in a minute! Thank you, hope to see you in the next Marvel or DC film, a true hero👊🏻

[@simoncollier5977]

very helpful, thank you!!! I actually just used the original spring without modifying it at all, because it had all come apart and I couldn't figure out the most efficient way to get it back in, your order and technique did the job great, after I'd struggled on my own for about half an hour!

[@j.j.8741]

Same, but far longer.

[@raymondmboya1834]

It worked. I. Have been fixing mine wrongly for many times and today, it has worked. Thank you alot. I enjoyed the video

[@tieganbrunton9163]

Looked through so many videos no commentary couldn’t figure out what they were doing saved my clippers! Thankyou

[@rw2940]

Wow! You are a life saver bro🤜🤛 I rinsed mine after a haircut some time ago and last night I wanted to trim and line up the ole mustache. 🤔I noticed when I pressed the power button a grinding noise and I saw that I needed to charge it as well. Fully charged the blades didn't move nor was I able to adjust the height. I was attempting to see how to disassemble it and by pulling on the blade assembly, it came off😮 I went to get some Q-tips to clean it and that's when it hit the floor running 😯🤣 I found your video in the first Google search👏👏 It was then that I noticed that the tension blade was was missing😲 Now that I had all the pieces to the puzzle, I was ready to execute and repair my e-clippers👍 Props to you! Your video was straightforward, informative and very well presented for a novice🙌 Be well friend🙏🍻

[@gargargargar]

You are an ABSOLUTELY LIFESAVER. GOAT. I took my shaver apart and thought I could never put it back again for SIX MONTHS. I fucking love you

[@mllee4016]

Thanks for the video it helped with my dog clippers... Now all my dogs have a fresh hair cut... Big Thank you....

[@nai.naisha]

A life saver!!!! One like is not enough, I'd give you a hundred!!

[@mattduggan4404]

Thank you so much from saving me from a trip to Winners to buy another cheap ass beard trimmer in the midst of a world wide pandemic. You probably saved my life.

[@Fonske]

Thank you so much for this video! Just fixed my clipper that came apart when I tried to clean it. Took two people and three instruments to do it, the spring was so tough. I can't believe you fixed it just with your hands! Thanks again 🙏

[@zen8418]

what did u use?

[@Fonske]

@@zen8418 A sturdy metal crochet hook, butter knife and pliers, if my memory serves me right.

[@rebelmslater9350]

2 years later and his still saving lives 👏👏

[@ottoschwandt6527]

I am so glad I found your video! My Wahl clippers are a different model. I had to unscrew the main blade to get the center of the wire piece underneath. Thank you so much again!! God bless and be safe!!

[@mandongaafonsoafonso9098]

You saved my life too I stay more 1hour to try but no success Is a biggest problem for this this machine

[@RythaGamer]

I thought I broke my husband’s razor when I dropped it, had no idea how to put it back together 😅 this video came in handy!

[@sugmagsuggerson750]

Thank you, was able to put mine back together after it fell apart while cleaning. The key was getting that spring positioned right and getting it to go under that black tab. The followed the rest of your procedure. Back in business for an XTAVA model that apparently is no longer available.

[@coolcornell8024]

You saved my life...i spent 2 good hours trying to figure out how I'll place that spring

[@Thomas-uq4rc]

You are the best! Fitting the spring back before the blade changes everything. Your method also works well for other models.

[@musicman195959]

I'm about to attempt to put the spring back into a brand new pair of clippers. Fingers crossed. Thank you for your video.

[@brooklyn11218]

Thanks for this. I was about to toss it in the trash because it wasn't cutting. Didn't realize I had to push the spring under the clip.

[@-mam-bambam876]

Thank you very vey very much!!! The first machine went to the garbage!!! The second one your video safe it!!🙏🏻🙏🏻 God bless you

[@avalonjustin]

My machine is a bit different (Remington brand) but with your guide I figured it out. Thanks bro!

[@TheHoodedsouljah]

Fam, this video was a life saver...repaired my blades...they're gonna last til I buy new ones...again thanks for the 'Life Hack'...

[@lisa_of_the_valleys]

Thanks so much for your help! When opening up my dog clippers for the first time to clean, I somehow made the spring come off and didn't know I needed to push that little part under. I was fiddling with it for an hour before ou found your post.

[@TheMongobruder]

Thanks soooo much. Spring went out in my First cleaning attempt. No way id have figured it out without you!!!

[@tibblethwaite]

Thank you so much for this video! You literally just saved me £20 for a new set after my husband dropped it and the head assembly flew off!!😁

[@marialynruzgal5884]

I even skipped my lunch just to assemble it. Thanks to your tutorial, it tooked me almost and hour to bring it back together. That damned spring 🤧

[@mohamedshahayusuff5793]

Very usefull video... I struggle with my trimmer for placing the spring. After watching this video, I placed accurately.

[@Gizmo_heads_up_barbershop]

You a life saver bro I just bought those same clippers on amazon lol just to take off bulk . And when I open to check them out I wanted to take off the blade to see and the spring pop off lol thanks for this video

[@alejandrojoga6885]

I wish u n yr family the best this world has to offer you bruv

[@ukandupaul3805]

Thank you very much. I was stumped on how to get the spring and blade clipped in place, but I managed it after watching the video.

[@Whomsky]

Had to do a lot of bending, but managed to fix my clippers this way. Thank you so much kind stranger!

[@mychalcampos4650]

Thank you for posting this! Super helpful. You also saved me some money.

[@kamillesmith9433]

I'm having serious trouble putting the spring back but other thank that this video is a godsend

[@flash420x2]

Glad you made this I’ve been struggling for weeks trying to put this together myself

[@burhanhaider1645]

Saved my sanity! Couldn’t figure it out at all, thanx bud!

[@diegogiovannimusic]

Thanks for this video, worked perfectly!

[@seanbrant7631]

This is the second time I'm using your video to fix my haircutting machine. If i could like your video twice i would. Thanks again.

[@Tradestocknepal]

Thanks you really saved my Rs.2000

[@davidhall9976]

Thank you! Exactly what I needed to see

[@davidjohn4140]

Thank you so much. I struggled with it, then my wife came and got that spring in under where it goes very quickly lol. Your video helped immensely. Again , much thanks. Cheers

[@mitrapalash]

Thankyou !! Did spend an hour trying to fix it as didn’t want to spend 100s on a new one before I find this tutorial ! Exactly what I was looking for in terms of advise ! Thank you bro !!

[@Skillz1333]

You're welcome!

[@itsme-gally5126]

Thank you sooo much man. I was fucking around with my clippers and just about had a meltdown trying to put them back together. Thaaaaaank you 🙏🏼🙏🏼🙏🏼

[@MickKly-ih4it]

Thanks for the video, I learned something so now I can fix my clippers 👍🙏

[@udfred]

Thanks a lot. You just save me from expenses and frustration. God bless you real good

[@DonMihey]

God bless you man! I work on a ship and there’s no where to buy new clipper. Managed to assemble it back 👏

[@Isaac-jp6em]

Thank you so much! You may not read this, but you are my new hero.

[@gladyjavier]

I was looosing hope that I will not be able my clippers anymore but got lucky to see your video! Thanks a bunch!

[@danielmorales9855]

Thank you 🙏 you are a genius .I just fixed my clippers . It took me 15 minutes to get it .

[@santavirginia8007]

Tks a lot! I just bought and fail dow the floor and couldn’t repair by me self, after this video I fixed easy way.

[@lastcoolman599]

Hello here from Germany in german; Sie haben mir wirlich geholfen mit Ihrem Video. Vielen Dank dafür.

[@LuigiRussoJazz]

Thanks, through your video I managed to save my device whose head split into pieces after failing: D. The hardest part was figuring out how to reposition the spring under the plastic hook. I found it helpful to use a long T-shaped screwdriver to press the spring with one hand, while spreading it on one side with the other hand.

[@OmniZeb666]

You saved my life I thought Im bout to meet mama's slipper.

[@zellhewitt7654]

you saved my life with this! appreciate you man

[@latonyahoward4079]

Thank you so much for this video!! It helped me fix my clippers and it saved me some money by I don't have to buy a new pair of clippers now. 🙂❤️

[@Zen_Power]

Really helped! Thanks. I hate needless and excessive electronic waste. So I like to try repair things if possible

[@lolipopstix9763]

thank u sir for this very informative video. now my dad can relax knowing he dosent need to buy a new trimmer. u are a godsend for this vid!

[@shotgunblitz9701]

Thanks so much.I was just cleaning it and all off a sudden I accidentally dropped it and the spring and plastic came off!I tried 2 hours putting it back on!Then saw your video.Thank you 🙏

[@tractordirt5167]

Thanks! I have different trimmer (Wahl bread trimmer) that I totally disassembled to clean out...and this helped me get the spring oriented correctly.

[@SpiritOfPhotography]

Thanks for sharing this one. I just got a new clipper in my holidays and during travel the spring developed its own life ;) With your video I got the parts fitting correctly into their place and the clipper works again.

[@momentohibrido8200]

I dropped my trimmer, it did not break but it needed to be put back together... this video helped me see which part goes where... Thanks man, was very much helpful and helps to save money. Happy new year

[@alonhaber7979]

why didn't I think of watching it earlier. Thanks dude

[@TheReesi73]

Cheers mate just fixed it 👍 had a feeling it was the pin but wasn't 💯😂

[@abstracz3375]

You’re a savior 🙌 he was risen

[@snackertwo]

Thank you Sooo Much... I was able to clean the hair and I had no idea I was how to get that off so thank you now I’m working on putting it back on LOL God bless🙏🏼

[@vibekekirk]

Lifesaver! Needed help to assemble the clipper head, and your video came to the rescue. Thank you 😊

[@dinahi.5582]

Thanks man, I just bought a new clipper but drop the head while cleaning it, your tutorial helped me to put the spring back in the slot^^(I was so mad I didn't know how to put the spring lol).

[@christinenelson7757]

This video just saved my sanity 🙌

[@vijaysiwach]

You da man! I just fixed mine and although my spring was good, it was making a huge rattling sound, only when I saw that the spring has to be pressed in the centre did the sound went away.

[@Somethingwithfilm]

Thanks man, we have been trying to crack since yesterday. Turns out we had the first piece you inserted the other way around.

[@Josh-ve9tk]

Thank you!! this was very helpful.

[@stevewawaw9413]

Thanks man, my wife took ours apart and didn't know what to do 🥴 your video saved the day, Thanks again 😃👍

[@malvinchirara7253]

You saved me .. I had no idea the whole problem was on that clip ..

[@inconnufrench6301]

Thanks a lot! thanks to your video, I was able to fix my machine which I was already checking for a replacement

[@mohammadaminrashidi4400]

god bless you. thank you so much for this quick video. helpful