Zero Gap Any Clippers in 4 Minutes | Tip #15 | Barber Equipment

[@TipsforClips]

Clipper & Trimmer Hair Kit: amzn.to/3TKrgnN Clippers: amzn.to/3j3Z68a Trimmers: amzn.to/3xum5wY

[@savingmoney4236]

Out of all the videos I have watched, no one else explained things in so much detail as you did. Thanks for the video!

[@TipsforClips]

Saving Money, thanks for that comment. My pleasure. Be sure to share!

[@petersanchez411]

Dude you just saved me time and money from returning some clippers and buying more expensive ones. My old ones broke that I've had for years and bought some inexpensive ones and 1st thing I noticed was they didn't adjust as short as my old ones. Started looking for other clippers online and kept seeing the term zero gap and looked it up on KZbin and your video was the 1st I saw. Reopened the clippers I had packaged back up and did as u said and they are just as good as my old clippers that I really liked. Thanks so much for the help!!!

[@DollyMat]

Nice and simple for a lady cutting her own hair in the pandemic. Thank you💃🏾👍🏾

[@deeunique365]

Man I appreciate this video! I'm pretty new to cutting and I have these same exact Andis clippers and had no idea that you could zero gap these... And once I seen your video and did it, that guideline came out with no problem. And I been struggling cutting my own guideline for months! (💯 billion likes from me bruh)

[@michaelangelomcfly3910]

I don't think you can do it the same way with the T Blade Taper Clippers a Lil Different

[@mdmizanurrahman2845]

মেশিন খুলে বিশাল বিপদে পড়েছিলাম ভাই আপনার ভিডিও থেকে অনেক উপকৃত হয়েছি ধন্যবাদ

[@keasha722]

Hi this really helped me with getting a bald line btw I liked commented and shared thanks keep up the good work

[@strouja]

Thanks and tip at 1:38 solved my problem informing us to have the 2 curved parts pointed to each other. When I 1st put it back together the smaller blade I had it curved away was from the larger blade. Thanks again

[@richardthenryvideos]

You helped me fix my Remington! Thanks for the help man. Mine needed oil

[@marlonglenn5514]

Very helpful video. I have been cutting my own hair to save a little money and I needed to change the blades. Thank you.

[@bevjones5205]

A very clear, concise and informative video. A Very good educator!

[@JoseVieitez]

Which one is the “lower” blade. Or rather, which one is the sharper one? Is the sharper one the one that has many more, smaller, tips?

[@cr4zym3x1c4n]

Just got my babyliss fx trimmers and liner, had to 0 gap them to make sure I can see different lines when using different guards, let’s hope this helps

[@car_bike_motivational_stor758]

Love from India🇮🇳 👍👍

[@10MEDRADO]

Was about to go buy another trimmer, will try this instead.. Much appreciated, thank you 👍🏻

[@GenesisGenius]

On the whal home cut pro. You can push it all the way. All you do is loosen the two screws push the blade back all the way and tighten while holding or pressing against countertop. Then take your fingernail and make sure you feel the bottom blade before the top(the one that moves). When cutting hair don’t press too hard or it can scratch. I just did this for the first time and the results were unbelievable. The clippers cut like a razor now.

[@infinite88588]

You really just made a video on this....wow.

[@manuelguillen406]

Thank you for the advice

[@carolwebber7447]

Thank you so very much Did this and my clippers work great Thank you for the instruction very easy to understand

[@luismartinez5320]

Lol should’ve came here before zero gapping my new clipper 😅 no wonder why I got all this little cuts all around my head lol... thanks for the info bro

[@joej3900]

Lol. I feel you bro. You gotta adjust them. Then try them. Then adjust and try them again and again until you get them just right. It can be a pain

[@GunninRebel55]

Lol @ all this little cuts all around my head. 😂😂

[@DanielGreen07]

I've zero gapped mine too and am getting cuts, sore patches and old skin being taken off

[@joej3900]

@@DanielGreen07 I had to readjust them a few times. Just a little bit at a time though. You might not get them to cut as close to the skin, but at least you won't skin yourself alive either.

[@DanielGreen07]

@@joej3900 I've adjusted them as best as I can, they ll do til I can get a pair that give that smooth skin cut 👍

[@wavyalmighty8854]

I have a pair of these same clippers that need to be zero gapped, and the lever tightened as well.

[@marjonyoung305]

U lazy

[@romeowhiskey2759]

@@marjonyoung305 Ikr, literally a one minute job haha.

[@ayeboi2780]

Great vid, worked perfectly for me

[@stevepailet8258]

got to get me some of that barber oil.. I always thought that was what generous barbers put in their hand before putting that 10/40 on my hair. Personally I think clipper blade oil works a lot better on blades LOL As to zero gap yup just make sure your rail that sets the fader is not wobbling or you may still do damage to your customer.

[@completedoor6616]

Thanks for explanation! Recommend using a #2 phillips screwdriver to prevent stripping heads of screws and better control.

[@mukeshkumar6556]

It's done bro thanks 🎉

[@rimkzizou451]

Thanks you from France

[@timeallen6900]

Thanks for taking your time it was very helpful

[@Tefo_Mathibe]

This helped, thanks👍🏿

[@ChicagosM0stWanted]

Thanks for sharing!!

[@Snazzy.Styles-co]

Thanks for this video

[@-johnny-deep-]

Seems easy. So if all you need to do is zero gap the blade, you would just have to loosen the two main screws and adjust the position, and you don't need to take it all apart, correct (like, say, on a brand new clipper)? Also, since you said to still have the top blade extend *slightly* further than the bottom blade, "zero gap" would really be "tiny gap", where "tiny" is something like 1/4 mm?

[@Labearski44]

Thank you clipper guy!!!

[@ismaelcastillo6663]

Great video brother, quick and very well explained 👍

[@TipsforClips]

Ismael Castillo, I appreciate that! 👍🏼

[@michaelogunniwa1497]

I love this this is helpful

[@rgonzalo511]

Excuse me which is the top blade and which is the bottom blade. Is the bottom blade the one that makes contact with the client and the top blade the one facing you?

[@shilohpettipas2536]

Great video, very informative!

[@gabegarcia1199]

Thank you

[@mohamedismail777]

You are a super star, thanks for your video it helped me fix mine :)

[@charliebrownsd]

Great video! Easy to see what you were doing, clear instructions and not a bunch of over explaining or annoying music.

[@HH-qz1cg]

The music is annoying

[@mdmizanurrahman2845]

অনেক উপকার হইছে ভাই থ্যাঙ্ক ইউ

[@Note-dy6yd]

This music is perhaps from a midnight bar- fight movie when everyone is drunk and throws chairs at one another. otherwise good video. Thanks to the close up shot, the camera is very focused.

[@bryanmuoki6250]

Perfect man

[@joelseay5609]

Thank you your video was very helpful.

[@c_dot114]

Does this make blending for fading more detailed??

[@thugnasty5242]

Same question I have

[@t.terrell7037]

So is the idea that the two sets of blades are aligned straight on top of each other? I still don’t get what the blades should look like to confirm they are zero gapped? Lower blade is the one the bottom, yes? Thank you!

[@tedytedy8918]

Great advice man!!! Tks alot

[@aussielass5621]

Should remington corded clippers have zero setting

[@sugs2007]

Great video this really helps.

[@MRCOOLBOY12345]

Just done mine 👍

[@TipsforClips]

sunil dutt, awesome. Thanks for commenting

[@Frichilsasta08]

Can I use a zero gap razor to get a look that resembles a slight grey on top after wet shaving it all off? I'm mostly bald but I l prefer the grey on top of my head that comes after 2-4 days of wet shaving. I'm wondering if this is a good strategy.

[@juanpalomares5899]

i been watching your videos great advice! im learning to cut hair and was wondering what the zero gap is for?

[@TipsforClips]

Thanks! Good question: I briefly mention at the end that it's for precision, but a better reason is that if you're ever using the clippers without any blades, you'll be able to get a really short cut. So if you're using the clippers in the short setting without any guards, it'll be as close to a zero as you can get it. Does that make sense?

[@boutrosebba7258]

Tips for Clips - Haircutting can it be used as a trimmer ? For beards

[@TipsforClips]

Saliba R, to lighten up a beard? Yes

[@thebigmann81]

@@TipsforClips do you need to zero gap if using 00000

[@kristicifci5389]

@@TipsforClips hey bro i just bought hair clipper and i always cut with guard on but i dont want that when i remove guard it cuts so bad how can i get rid of it

[@naveenbarik6661]

Hii sir My name is Naveen Barik I'm from india and I'm also barber And I'm watching your video Please tell me bro best professional trimmers In low budget and please tell me you using also Trimmer set for High low and mid fade please reply me ❤️❤️❤️👍👍👍👍

[@leeguitarmcr]

Is zero gapping recommended for someone with SMP?

[@michaelleonard1462]

I appreciate the help buddy you explained something I needed to know👍🏽

[@dabert9589]

what if my clipper has a spring so it makes it hard to 0 gap?

[@desmondmitchell5602]

Thanks man u the best

[@truegrizzlesfan2292]

Great video I purchase some cheap wahl clippers from walmart the chrome pro very cheap . I zero gap the clippers and I get a smooth clean shave. All I need it to do. I have the most expensive trimmer and the cheap whal is better. No joke

[@TipsforClips]

trueGrizzlesFAN22, nice! Thanks for sharing

[@truegrizzlesfan2292]

@@TipsforClips i only used the wahl clippers on me. i know there are better clippers but my brother introduce me to the chrome pro and i used the adjustable gap clippers to shave my facial hair. I am so please.. Your video save me TIME AND Money ... thanks again

[@inderpalyadav784]

Bhai mera trimmer mn301 hai meine uska ek baar nut khol diya tha ab vo fit nahi beth raha pls help🙏

[@kenibnanak5554]

And where do you put the plastic bar?

[@kingleonidas6092]

When I'm tightening the screws, it just reverts back to the original position

[@Sarah27281234]

You are so awesome

[@گەرانەوەیحوکمیئیسلاملەکوردستان]

Well done

[@iTzsimplefx7]

Holy fucking shit man excusse my language i watched all ur vids ur hands down the best advice i got from watching yt videos man damn. can you also make some bald fade and taper technique videos.

[@TipsforClips]

Revolution97, thanks a lot for the compliment! I have both of those videos out. If you can't find them, let me know and I'll paste the links in a comment here

[@bellasmom2597]

Which one is upper blade and lower blade???

[@Tayu54E]

Can I use it for guidelines and then put it back to normal position? and Does it take warranty?

[@jstorres486]

When I zero gap and I put a guard on and use it in the close position it makes a louder noise.. is that normal? Until it wears out the inside of the guard a little?

[@patriksajko3956]

Is it okay when it has diferent sound now.... it cuts perfectly but the sound of the clipper is different

[@kushma5769]

Pls help me where to put the black plastic thing into the clipper

[@ReeF83]

Do you recommend to zero gap if you will be using it to line up your beard?

[@tedgtou]

@Sheriff. 0 gapping is for fading, it helps with removing leaving fades lines for better blends. For beard, I would use a trim liner, they give a crispier lines and easier to handle.

[@BangerVevo]

Thanks for this video sir ☆★

[@TipsforClips]

parallel jinx, my pleasure

[@djfunkychicken]

when you brush off hair face the trimmer downwards.. less chance of getting bits of hair further into your investment!

[@Anteater23]

Upside down you mean

[@vmcc9070]

Nice video! So...just did it with mine...just to be sure..the little blade just go over the pivot right? and the big blade goes on top and when screwed this one secures the little one? am i correct?

[@TipsforClips]

VIC CAMPOS, thanks! If I understood you correctly, then yes, that sounds right

[@janetbullock3581]

Thank you for this video bcuz I now know how to fix my clippers

[@TipsforClips]

Janet Bullock, really glad to hear that, thanks for your comment

[@bojanbojic546]

Great advice... Andis US pro (Envy) li cordless or Whal Magic clip cordless ? In this store Andis is cheaper 25 euros... Please, give me advice...

[@CHAMPDOGZ]

All good but if your new get the Magic

[@bobmarley6161]

I will try this on my clippers... Thank you

[@fredd.3842]

will this work with all clippers of wahl?

[@Scardrewpro]

So is it best to have this type of clipper as your fading or balding?

[@TipsforClips]

Scardrewpro, zero gapping helps you cut shorter, so it’s good for a balding haircut, though you’ll need something other than just clippers to entirely bald it out. It also helps with precision

[@joeblack621]

It appears that most excellent clippers can cut hair to 0.8 mm but if you have a good shaver than it should be able to cut the hair from 0.8 mm to 0 mm safely.

[@t.terrell7037]

So for super low, balding haircut to get the look you need clippers and trimmers together? You can’t just use trimmers, like T Outliners by themselves, if your hair is already short and you want it super close? Thanks

[@darkmatter2604]

Hey I appreciate it!!

[@Dracofrmdaraq]

Your awesome

[@aymakam3789]

Hello, it is not recommended to zero-gap a clipper especially if it has been in use for a long time cause the upper blade will draw a line (groove) in the lower one and whatever you try to be precise and align them back to the previous position you will never succeed so you will loose the sharpness of the blades and you might be forced to through both of them and get new sharp ones. I would like to thank you for the channel and for the simple, concise and at the same time very rich in the most wanted information videos you present.

[@joeblack621]

With the Wahl Cordless Magic Clippers it should be possible to zero-gap virtually 0.25 mm and possibly to 0.1 mm safely: F: Zero-Gap Any Clippers in 4 mins - Tip #15 - Barber - Best so far!!! kzbin.info/www/bejne/j3ytnp6Vnd13Y9E 1. Excellent, superb video, but didn't properly explain which; A. blade was on the bottom (the one with the screws in it), and B. that the forward (facing the front of the clipper) lever's position closes the teeth. C. Oil the clipper before and after use. 2. Should probably holding the clipper upside down Whilst removing the loose hairs A. Instead of brushing some of the loose hairs inside the clipper. G: How to zero gap Wahl Cordless Magic clips - How to test if the zero gap is correct, but poor close-up kzbin.info/www/bejne/fIHXcqpsgL6im8U H: How to zero gap your Wahl clippers the easy way - NB! Oiling Section is good kzbin.info/www/bejne/mqnIop1mgpiEiJY

[@marloncoley1810]

All my clippers are 0 gapped and I've had some for at least 10 years with no problem

[@ct155]

Great video! But yeah the music is a little too loud. Thanks for explaining in detail! New subscriber. :)

[@johnjosuasunga141]

How do you clean your clippers? You videos are very helpful

[@TipsforClips]

josua su, thanks. You can use clipper spray sold at beauty supply stores

[@idrisertem9793]

does this mean it will cut closer?

[@TipsforClips]

Idris Ertem, yes 👍🏼

[@diegonavarro146]

Kinda confused on which blade should stick out further, is it the big blade or the little one ?

[@joej3900]

It's the big blade bro. If the little one is sticking out farther, you will cut yourself or your client.

[@xStarNxB]

Can this fix the biting issue?

[@Mrethioman1]

Great video. My problem is that I keep marking my skin and gives me black mark my skin when I do outline. What your advice. Thanks

[@alwaysright237]

Did you figure it out?

[@sangamanta7409]

I have the same problem also

[@delta_tango_dt]

Check your blades to see if the cutter blade is higher than the guard blade.

[@trkersten]

Unfortunately this does not work with a Wahl Super Taper Cordless. The blade can not be moved as soon as the screws are in position. Or am I doing it wrong?

[@trkersten]

123 654 Nope, won’t work because the two holes in the blade and the two screws holding the blade have the same diameter. When I loosen the screws the blade is still fixed. It can only be moved when the screws have been removed. Maybe they have changed it with the model I have (Wahl Super Taper Cordless). I have now used two different screws to make it work like you have described. Thanks.

[@CHarris73]

I dropped my Andis easy cut and now they are Jake Brake loud. Any help on re-adjustments

[@TipsforClips]

Tighten, oil, and straighten the blades

[@fredsmith901]

Thank you

[@TipsforClips]

My pleasure

[@powerfist80]

What're the purposes of zero blading?

[@seks94]

You can cut closer to the skin It's good if you wanna do a shape up/line up

[@powerfist80]

@@seks94 thank you.

[@boulala21]

hey there, I've got a wahl color pro cordless and I was wondering if I could safely try this too? maybe not necessarily 0 but lower than 0.8. Thanks

[@NighmareRS]

boulala21 yes you can I have the same clipper as you. You can 0 gap them

[@boulala21]

@@NighmareRS oh sweet, do you know if I need different screws? as that's what I read somewhere else. Cheers

[@sillkthashocker]

Set to -1 for extra close shave

[@emiliomayes1752]

Thanks bro

[@sierratrey]

I have a Wahl Pro. If I loosen the screw on the gap lever it allows for moving the blades to exactly where I want them. Is that the same as unscrewing the 2 screws holding the blades together? It seemed like the easiest way. Although I still have to disassemble it to clean and oil. But will the blades remain zero that way?

[@cjdig86]

The screw on the lever only tightens or loosens the resistance of the lever. It doesn’t allow for adjusting the position of the blades.

[@DanielGreen07]

I've zero gapped my wahl baldfader clippers and now they're taking off the top layer of skin and not cutting to a smooth finish. Help!! 😄

[@IronIzan]

Your bottom blade is overlapping you top one you need to have a very slight overlap in the top blade so It doesn’t cut your skin 👍🏽

[@DanielGreen07]

@@IronIzan I've adjust the blades so there's a slight gap now but it's taking off skin (white, dry skin which may be dead?) Maybe the clippers are fine and I need to moisturise? 🤷‍♂️

[@IronIzan]

@@DanielGreen07 prob the clippers get some fast feeds they work good af

[@DanielGreen07]

@@IronIzan I've given up now and just wet shave it with a hand razor 👍

[@marloncoley1810]

Those clippers don't need to be adjusted.They already are sharp.🤔

[@shendetgashi2100]

Not all type of clippers can be zero gaped

[@battle4dead]

Thanks. Btw do I hear a Canadian accent of sorts? I also feel some kind of Egyptian undertone somewhere (have an Egyptian friend). I wonder if I'm completely off with my guess 🤔😁

[@RapPhilosophy]

Sorry dumb question. Wasn't it already 0 gapped with the clippers closed in the beginning of the video?

[@SoulCaliburDeathCrie]

Rap Philosophy most likely but he was doing it as an example. Or for instance sometimes when clippers come pre zero gapped they tend to leave a gap of like 0.25mm as a safety precaution and sometimes you want it a little tighter like 0.15mm. Might not sound like a huge difference but it does make a massive difference in results.

[@RapPhilosophy]

@@SoulCaliburDeathCrie ah ok. Got it. I'm new to it. That makes sense though

[@SoulCaliburDeathCrie]

Rap Philosophy cool no worries I’m no barber either myself I just like to learn this stuff. But so long as the moving blade and stationery blade don’t overlap you won’t be cutting people that’s the main thing :)

[@stewdapples267]

Very good except you’d be better of with a bigger pozi drive 😆

[@richluvsellie1]

I did this and it pulled my hair instead of cutting it..what did I do wrong