Stripper Showdown!!! Knipex 13 82 8 vs Klein 2005N vs Carlyle CHT WSCCP. All-In-One Wire Strippers.

[@sknight0391]

I called the Knipex pliers "Klein" about 5 times in the video. Haha, I always screw up & say stuff wrong in every one of my videos. Oh well, thats how I roll. NO EDITS...YOU GET WHAT YOU GET....TAKE IT OR LEAVE IT! 😁👌

[@sknight0391]

Thanks for bearing with me guyz. #BlueCollar 💪😁👍

[@rogergregory6512]

I will take it.....👍👍

[@rbhe357]

I want a refund!😊

[@rogergregory6512]

Man, when I saw the title I was expecting a different video, but I still enjoyed it

[@sknight0391]

I should give away a prize to the first guy that can tell me how many times I called the Knipex pliers Klein. 😂😂😂😂😂😂😂😂.

[@whitesheatingairappliancer7101]

I switched to the ratcheting crimper. If you have arthritis ratcheting crimper are great. Nice video Shannon. Thank's for sharing.

[@sknight0391]

Yeah those ratcheting crimpers do seem nice and they make a very nice crimp. If I was doing ALOT of crimping I would definitely have to have a pair of those. Thanks for watching buddy 😎👍

[@paulmarsdensr1095]

Ferrules are used in alot of electrical cabinet work and other electrical panels.

[@sknight0391]

Thanks for watching 😎👍

[@marceloavalos2333]

As an electrician and technician I prefer the knipex and the carlile the latter `because of the size, without a doubt

[@sknight0391]

Thanks for watching 😎👍

[@avernvrey7422]

The Carlyle or Snap-On are better for auto work. Because of the smaller head. Klein is just too big.

[@sknight0391]

Good point. When you're in those tight spaces, size does matter. (And no, that's not what she said.) 😂👌😎👍 Thanks for watching.

[@Bobherry]

I like the vise grip strippers along with klein. They are what I use with install.

[@tomasnewson6744]

The crimp on the knipex pliers is meant for bootlace ferrules 👍🏻

[@sknight0391]

Yeah, unfortunately I figured that out after I bought it. 😂 But still a great pair of pliers. The cutters are amazing! 😎👍

[@tomasnewson6744]

Great video 👍🏻 I bought the Carlyle’s after watching 👍🏻

[@practicalguy973]

You should check out the brother of the Carlyle CHT WSCCP. The CHT WSCCPLN is the long nose version.

[@sknight0391]

Got em' 😉👌

[@Eddy63]

I have the Klein J207 -8CR and really like them and of course I have the Klein crimpers as well ... Good vid ...

[@sknight0391]

Thanks for the comment & thanks for watching 😎👍

[@Eddy63]

@@sknight0391 And by the way , we need more vid's from you ... Just sayin'

[@milwaukee_69]

I have the Klein and Milwaukee version of the Klein dipped handles and those Klein pliers but want the Carlyle pliers to have as back up for the Klein crimpers.

[@sknight0391]

You might end up liking the Carlyle's so much they'll become your go to pair of crimpers. Thanks for watching 😎👍

[@bellcherian]

I wish NAPA in Canada had the Carlyle CHT WSCCP but no such luck. I enjoyed your video.

[@sknight0391]

Thanks for watching 😎👍

[@T-Bone-nk1ng]

I have that Klein. I wish they made a smaller version. It is A+ quality and never let me down but it is sort of a behemoth.

[@sknight0391]

Yes, you're right. A 7-inch version would be really nice. Thanks for watching 😎👍

[@scrambler350]

My #1 is the Klein J207-8CR "All-Purpose" pliers; needle-nose, strippers, cutter, crimper. * I have those KNIPEX; (impulse buy while at the Electrical Supply house), but, for the reason you stated, they got put in my electrical toolbag at the house because the crimper isn't suited to HVAC work. They really shine if you're doing 12-14ga romex, electrical boxes, and EMT. * I have the green-handled Snap-On version of those Carlyle crimpers; they're really nice, but aren't needle-nose - so they've been banished to my automotive tool box (where, as you mentioned, they're starting to get surface rust because of that shinier finish on the stieel). I forget exactly how expensive they were, bought them on eBay. * Those Klein 2005N stripper/crimpers are nice....but, again, lack the needle-nose - so the 'All Purpose Plier' wins again.

[@scrambler350]

Update - just scored a NIB pair of those Klein 2005N pliers on eBay for $25.62 Couldn't pass them up for THAT price; will have to throw them in my TP4 and use them for a week or two and see if those handles are as nice as you say.

[@techti8792]

What's the update? What you recommend for hvac work?

[@hidros1461]

Thanks for the tip, any update?

[@rbhe357]

Thanks for the review. Just picked up what seems to be the only Carlyle in 30 miles. Got it on sale too. Just couldn't bring myself to spend $napon prices for what appears to be the identical tool.

[@sknight0391]

Cool man! Glad you were able to score a pair on sale, that makes it even better. I'm sure you will enjoy using them . Thanks for watching 😎👍

[@paulmarsdensr1095]

These are the Knipex installation pliers. I have those snap on wire stripper s. The Knipex Forged wire strippers are better.

[@practicalguy973]

I don't have any of those but I need the Carlyle CHT WSCCP now 😎 I have the Southwire S5N1 (5-In-1 Multi-Tool Pliers). They are great, thin profile tips but with large aggressive round gripping teeth so a full pliers head really. The cutter is large and works awesome and the crimper is on the back side close to the pivot point so crimping is effortless with that leverage. It reams and has comfort grips.

[@benjamintimmins1656]

I wish channel lock came out with a stripper crimper combo. I like the channel locks better than the kleins cause I crimp a lot of insulated spade terminals and you dont have to open the tool up all the way to get in there cause channel locks is on the top instead of the bottom like klein

[@sknight0391]

Very good point. And that's the kind of stuff I was hoping to see in the comments. That kind of stuff helps other guys choose the correct tool for them. I actually meant to mention that in the video but forgot. I do like the idea of putting the insulated crimp on top, furthest away from the rivet. 😎👍

[@TPINSC]

I went to NAPA and got a pair of Carlyle's. For $20 it's a pretty good deal. Just like the SNAP ON'S but a lot cheaper! They also fit in my MB really good.

[@sknight0391]

Heck yeah, I hope you enjoy using them as much as I do. 😎👍

[@TPINSC]

@@sknight0391 I actually bought a second pair for another service bag.

[@sknight0391]

@@TPINSC yeah man, those things are awesome. I love them. Thanks for the feedback buddy. I'm glad you're finding them useful. 😎👍

[@throttlebottle5906]

one thing to note is the difference in strippers for solid wiring vs. stranded. like the kleins only list the wire gauge for stranded(STR). that model knipex appears to be labeled for solid wire(didn't look it up, maybe not) but the difference is usually one gauge size off. examples, stripper for 10awg solid = 12awg stranded wire and stripper for 14awg solid wire = 16awg stranded! if you don't pay attention and use stripper solid wire marking on stranded, it deeply nicks all of the outer strands and causes them to break off very easily, which makes a weak point when terminating(crimp/solder/lug/wire cap) make no difference.

[@throttlebottle5906]

ok, I couldn't resist temptation. the knipex stripper holes are labeled for solid wire, with stranded(STRD) it's 14 and 16awg! knipex-tools.com/index.php?id=1023&page=art_detail&parentID=&groupID=2216&artID=34120

[@metrowash]

Carlyle has a nice multi tool with a very thin needle nose that I like for control work.- model CHT WSCCPLN, but they have gotten ridiculously priced for a Taiwan-made tool. They were $30 just a few years ago. Also, NAPA will not exchange a defective tool without a receipt, so I'm not sure I will continue to buy from them. Snap on 29ACF are also a solid choice, with insulated crimpers closer to the end of the tool but expensive. If you get bored sometimes test the quality of your crimps with some weight. UL486A standards are strength pull test of 70lbs for #12, 50lbs for #14, 30lbs for #16, and 20 lbs for #18.

[@sknight0391]

Thanks for watching & for the feedback. 😎👍

[@androidgameplays4every13]

WHere is that accent from? not the first time I hear it, English is not my native tongue and I'm just curios, great video BTW, I went with the Klein 2005N!

[@sknight0391]

Down south. Thanks for watching 😎👍

[@sknight0391]

Down south. Thanks for watching 😎👍

[@paulmarsdensr1095]

A great video brother.

[@HVACGUY]

Every guy needs a good stripper in his pocket.

[@sknight0391]

You can say that again 😎👍 Thanks for watching buddy. Stay hydrated, that hot weather is rollin' in!!! 🌡️🌡️🌡️🌡️

[@YukonHawk1]

Great video. I just subscribed to you. You seem like a really honest guy based on your replies to Mikey Pipes. I look forward to your vids. All the best. 👍👍👍😎😎😎

[@sknight0391]

Thanks Paul 😎👍

[@YukonHawk1]

@@sknight0391 most welcome

[@rwcasto]

So- I bought the carlyle's after your video of them- totally awesome pliers, crimpers and strippers- and they are not HUGE - fit awesome in my bag

[@sknight0391]

Awesome! Glad you are enjoying them Rick. Thanks for watching. 😎👍😎👍😎👍

[@bradl2636]

If only buying one for DIY around the home which one would you recommend?

[@sknight0391]

Carlyle 😎👍 Thanks for watching.

[@bradl2636]

@@sknight0391 I couldn’t find a Carlyle vendor for reasonable price shipping to Australia but I believe I found an identical substitute. Thanks..!

[@MrRubenrivera9649]

I just got those kleins and so far I like them (duh their kleins what's not to love about them and made in the USA 🇺🇸). I have Southwire version of knipex (pronounced like knife) and they have the same style cutters and they work great and a hair cheaper than knipex and work as good as knipex.

[@sknight0391]

Thanks for watching Ruben. Enjoy those new Kleins. 😎👍

[@MrRubenrivera9649]

@@sknight0391 thanks bro I went to school for hvacr and use a lot of tools as a handyman and Klein tools, Southwire, ideal, Channellocks, Milwaukee pliers Dewalt pliers are part of my kit

[@Señormakey]

Knipex is pronounced "Ka-Ni-pex". It's a German company. And they pronounce it with the K.

[@MrRubenrivera9649]

@@Señormakey it makes more sense to me like knife 🗡 you wouldn't want to call it kanife (not to sound or get smart) it just makes more sense to me

[@mikeb.7972]

Nice job, totally agree on Klein!

[@sknight0391]

Thanks Mike 😎👍

[@NorCal-refrigeration]

Wait Stripper Down???????

[@sknight0391]

#clickbait 😄👌

[@sknight0391]

Working man doesn't even clean the blood off of his middle finger, where he busted it up earlier at work, just to do a video. Cameras rolling bloody finger and all 💪🆎🕶️

[@clintglasgow5633]

👍

[@ApartmentMaintenance]

Nice Strippers 😜 I'll take all 3, how much 💰?? LoL! I definitely like the Klein strippers, but starting to buy some Knipex tools & really liking those. Never tried the Carlyle or snap on strippers. I heard you say in another video you can buy them at Napa. Good to see a video from you Shannon! Keep them coming when you can bro 👍

[@sknight0391]

You got to try those Carlyle strippers. They're on sale this month at Napa for $19.95. You can't go wrong with that. You won't regret it. They will end up being one of your favorite tools. Thanks for watching 😎👍

[@jelajahsebanten]

Nice tools for work

[@GS-lh2nx]

Where are the Carlyle s made?

[@sknight0391]

As far as I know they are made in Taiwan. But they are made to a pretty high quality standard. Not the "typical junk" tools from overseas. They also carry a lifetime warranty, so hold onto your receipt. Thanks for watching. 😎👍

[@GS-lh2nx]

@@sknight0391 Thank you. They look nice and I have come to appreciate a lot of Taiwan-made tools. Still not my first choice but definitely not the worst either.

[@harrydickson4575]

👍👍👍

[@throttlebottle5906]

the last stripper showdown I seen, resulted in tons of pulled hair, ripped off wigs, blood and a stabbing :)))

[@gregbowman3598]

Nice 👍

[@sknight0391]

When you use those Knipex pliers you have to hold your little pinky out to the side. #Fancy

[@sknight0391]

These weren't the kind of strippers that were standing over you trying to wake you up after you fell off of the roof. 🤫🤫🤫

[@gregbowman3598]

@@sknight0391 😂

[@Phyoomz]

that intro 😂😂

[@sknight0391]

Thanks for watching 😎👍

[@hankhessig6586]

The problem with taking Strippers home is that their all Crazy

[@bradl2636]

I’m not sure of the official wire cutting sound but I’m pretty sure the official electrocution sound is “scissorfritz” #MadMagazine

[@mrgreen9086]

Had to turn down the video lol

[@sknight0391]

We should call you Mr Sneaky instead of Mr Green. 😂😂😂 What cha doing honey? Ahh nothing, just watching three strippers on KZbin. Yeah right, like I believe that.

[@mrgreen9086]

@@sknight0391 trying to get me in trouble 😂

[@Freakingstang]

Generator and hvac tech with an automotive background. Basically a maintenance repair douche. The crimper portion of those Klein’s sucks. The little snap ons (same size as the Carlyle) have more leverage for crimper. The Klein’s crimper head isn’t the same as the OG Maroon crimper. The cable cutter portion of the Klein’s below the rivet fold over on fine stranded wire. I was very disappointed in them. Maybe my set was just a dud. I wish knipex offered more wire sizes for the stripper portion. Not all of us in the sparky field use cutters and strippers for romex. I also wish knipex would make a 10-12” pair of cable shears like Klein does. The cable cutters Knipex makes are a stepped design and do not work well with double insulated SO cables. My gotos are the snap on shortys. 4-5 pairs between the service tuck, work, veto tech pack, home, etc. or the OG Klein dedicated crimper. OTC and cornwell also make a 90 degree head version of the snap ons/Carlyle that make awesome crimps in tight spots. I like the wide nose forged Klein stripper combos but the leverage point for the crimper makes it difficult for proper crimps.

[@sknight0391]

Thanks for your comment and thanks for watching 😎👍

[@StvMcQueen1]

I fell asleep during the video! WHO WON?

[@sknight0391]

I did !!!! Because you watched and commented... So that's a win for me. 😉👌😊😁😎👍 You can't beat the Carlyle's.

[@jonathanhege5029]

Carlyle is the best. Yes !

[@sknight0391]

@@jonathanhege5029 thanks for watching 😎👍

[@TedCookHVAC]

Strippers ...... lol

[@rustydogrustydog9191]

No such thing as a bad stripper. That’s what my wise uncle once told me.

[@sknight0391]

Strippers are kinda like pizza... Even a bad one is still pretty good. Hey, thanks for watching 😎👍

[@rustydogrustydog9191]

@@sknight0391 😂👍

[@funhvac3055]

Gotta love those strippers 😃👍

[@maxwellhouse1902]

So you're 100% sure that the Carlyle unit is made in the USA?? With USA steel? Snap On has to meet government "mil spec" quality control that Carlyle doesn't. Maybe the Carlyles are Snappy rejects and rebranded. I don't know. For the average homeowner and occasional HVAC dabbler, the Carlyles might be fine, but a pro mechanic can write off the Snappy and Klein additional costs on their taxes and the homeowner can't. IF a reject fails the homeowner, he or she has to take time out of their free time to go get it replaced. IF a pro has a tool fail, it's costing them money to go chase replacement parts and tools when they should be finishing up a job. I've pretty much lived by that old slogan, "Buy The Best and only cry once.". I do like your detail in this video and I'll be looking for a pair of the Kleins at the next few flea markets and yard sales I attend.

[@sknight0391]

I don't believe I remember saying the Carlyle were made in the USA. They're actually made in Taiwan. Which is slightly better than China product. They are actually very good quality and also come with a lifetime warranty through NAPA auto parts. You can go into any of their stores and exchange them if they ever break or tear up on you. Thanks for watching 😎👍