Skull Wood carving for Halloween.

[@lizakin1274]

That turned out great. And yay for putting your gloves on.

[@CarvingFusion]

Lol hi liz

[@lizakin1274]

@@CarvingFusion Lol. Hi Jordy

[@gypsywolf58]

Liz..Im sitting here, with black stain on my hands, that won't come off! Lol. I am picking up a box of gloves tomorrow! BTW, I'm getting my workshop, set up finally in my RV!! Can't wait! I gotta go back and watch Jordy's video on a dust collection table!!

[@lizakin1274]

@@gypsywolf58 get your gloves on Tammie. Lol. How cool about your RV, you'll have to post pictures.

[@triciatownsend3904]

Very cool!!! Channeling Sir Ross... 💀👌 🤣🤣

[@evilevilrick]

I like the way it looks. I think it came out real good. Yep, ya got me. I don't have a "picture" off a knife on my coffee cup. I might have a "real" knife,,, or 2,,, maybe, but no picture of one on my cup. Nope, I got a picture of an eagle on my cup. Airborne predator. Hi jordy.

[@CarvingFusion]

Haha GOTCHAAAAA

[@kjirstenboucher9682]

Always enjoy your videos. Thank you for taking the time to share, and encourage, and inspire.😊❤👍 Now I'm going to have to give it a try!

[@scottmclean4237]

Really love the small random skulls around the main one , totally bad ass

[@CarvingFusion]

Tha KS scott

[@scottmclean4237]

Now that’s stained it’s totally badass should get that in a film set

[@calvinscarvings.66]

*yes, this is what I shall carve* (I was literally just wondering what to carve next)

[@CarvingFusion]

You can do itttt

[@Inverts4Introverts]

I can always use your advice. I've got really bad ocd and your like the bob Ross of carving. I just put your videos on as I carv for encouragement if nothing else.

[@CarvingFusion]

Thanks john

[@jimschaffer9831]

Your carvings are the BEST.😀. Will always be a Fan of your channel. Keep them coming. Jim's wood shop.

[@CarvingFusion]

Thank you

[@davidrogers6694]

Thanks bubba I really enjoy your videos and you just being you I am just getting started carving keep having fun 🤠

[@CarvingFusion]

AWESOME ty

[@alanterry6683]

Ultra cool. 😎 Thank you for carving!

[@CarvingFusion]

Thanks al

[@shawnbrooks2855]

Yah ben I like the noise

[@CarvingFusion]

Lol haha

[@chrisburnettskip7439]

wicked im doing something of the sort tmo .....looks awesome bro and the mug :)

[@CarvingFusion]

U can do.it

[@crossbonescowboy6285]

I like it better like this than if they were full skulls. Bravo to the Ghost Skulls, CC

[@gypsywolf58]

I love it Jord!!! Very cool! I like how you used the two different shades too! LOVE IT! LOVE YOU!

[@CarvingFusion]

Thanks tam, u too

[@mylastnerve138]

Evil Rick just got the smack down. Totally awesome Jordy. See ur a badass

[@Wingman115]

Bad ass brother. Looking great.

[@CarvingFusion]

Thanks.mam

[@CarvingFusion]

Man*

[@Wingman115]

@@CarvingFusion lol 🙈

[@amrituppal1361]

That’s an awesome piece Jordy. Love it 👍🏾👍🏾

[@CarvingFusion]

Thanks bro, i have no rounds left for pumkins, what about a xmas tree

[@1492junus]

Looks awesome

[@CarvingFusion]

Tha ks jeff

[@glenmckelvey5952]

Love it buddy looks awesome .

[@gypsywolf58]

❤Hi Glenn!!

[@glenmckelvey5952]

@@gypsywolf58 Hi Tammie 🤚.

[@nancyjohnson5483]

I luv it. Just got my Grumpy Jesse t-shirt in the mail-yeah!

[@CarvingFusion]

Wicked!!! Thank u

[@PickerNation]

really i think its one of your better creation you made it your way

[@CarvingFusion]

Thank you

[@nevamann6209]

Love it! Thanks for what you do!!

[@CarvingFusion]

Thank u Neva

[@TreyBattles]

I was watching this while practicing my wood spirits. Got up to get some more coffee and one of my dogs stole my piece right of the work bench 🙃

[@CarvingFusion]

:(

[@eazyrider759]

Love the nod to Bob Ross with the happy little feathering of stain! Lol!

[@spikewillow4552]

Looks wicked buddy! 👍🏼who doesn't love skulls 💀 right? Thanks for sharing brother take care.

[@DCSuperShine]

love it!!! Glad I found your channel!!

[@justcarverob9389]

Sweet love it Just carve

[@CarvingFusion]

Ya just carve and make more vids please

[@mikeschmidt5115]

Looks Awesome Jordy😊

[@ABWeaver]

Love the music! Funny!

[@joneichhorn6287]

my new favorite

[@frankbetz9202]

Crap man thats awesome, I think it is cool keep carven

[@CarvingFusion]

:)

[@johngoodall7097]

Jordy this one of your best carvings because it,s so different and character full and the colours work so well together. Custom car painters often use ghost skulls in their work and draw the skulls into weird twisted shapes like yours, so well done and great video it helps us all and your comments are noted, and on to the next one eh Jordy👌

[@scottmarshall6766]

I'm thinking you are being a little over critical of yourself. When you made the transition, it became evident where your inspiration came from. It looks more like a woodspirit skull than what I'd guess a ghost skull would look like. Cool results however you get there. Adding on the extra skulls was a nice touch. I've gotta get some cottonwood bark, that looks soooo easy to carve. (Guess that's why the price on the stuff is higher than a lot of fancy hardwoods). BTW, I made a cheap temporary version of your exhaust system, it's an old 1hp compressor (lovin the silent California air compressor for small stuff like airbrushing and spraying lacquer thru a touchup gun). Anyway I modded the box into a 18" wide mini booth, added a 4" Amazon exhaust fan and some dryer duct out the window. Works surprisingly well. Saves a lot of the mess - been hogging a 3d snowman out of a 4x4, and it carries away all the fines, leaves the heavy stuff in the box where I can scoop it up. Keeps you from breathing all those fines. Sure wish somebody had decent filter masks in stock for less than a hundred bucks, but this pretty well does the job of pulling it away from you. BTW, if you haven't tried the Saburrtooth Buzzouts, consider giving one a go, I got a couple on a deal on Amazon 10 bucks off, and one even came with an arbor for $39. I got the green and yellow 3/4 wide, and they are super in the Foredom. Smooth finish and hogggggg like crazy. they're heavy and it smooths out the rpms so it doesn't oscillate like lighter tools. They're rated to some insane RPM like 25000, I can't imagine what they are like at those speeds.... Scary probably. Full speed on my square drive TXH is supposedly 15000 on full speed (not believing it, if it's half that, I'd be surprised) and that's too much Buzzzz for me! I think they may still be marked down on Amazon. Rockin Skull Jordy, came out great!!! Stop being so negative!!! You can carve skulls, they are YOUR style and they look super. We're all having fun, that's what matters. Thanks for another super video Jordy! I don't know how you do it, I can barely watch em as fast as you carve em and tape em. Hope you get some sleep once in a while.

[@CarvingFusion]

:) thanks man

[@randebhans]

Always impressed at how you use your dremel and sandpaper! Nice cup!

[@neilfreeman4443]

love it Jordy fun carving for you enjoyed the video great job teaching us good pointers carve on Bro

[@Frightknight28]

Awesome piece!

[@bullard1980]

Awesome instructional.... thanks!

[@mjsdreamer]

Frikin' Awesome! I love how everything comes out looking so amazing!

[@CarvingFusion]

Thank you

[@MultiTom1956]

Jordy , that looks awesome ! Love it😊

[@AndrewMuskett-s5e]

That looks proper cool 😎

[@CarvingFusion]

Thank you

[@iancocksedge3938]

hi jordy. another great piece. the two shades of stain work well together i think. great job. keep up the good work and stay safe.

[@marcoscrookart688]

Love this beautiful piece of work

[@robertjenkins5440]

That look's badass brother...great job man

[@davidgrass3719]

I like it big daddy, it reminds me of an old man that has lost his false teeth,... Wicked as hell, Keep carving, we dig it, See Ya

[@CarvingFusion]

Kickin ass grass

[@timothyreed200]

dude i just love it. bad ass i say. so inspiring keep em coming

[@spiralcraft8957]

A proko skull would work great as reference.

[@theshrumshop]

Looks awesome 🤘

[@nomad_woodmizer696]

That’s awesome! I got to try this! Thanks buddy

[@eazyrider759]

Wicked,again! Love it!

[@MyLodgie]

Awesome Jordy.

[@hughtempleton8640]

Good thinking Jordy 👍

[@randebhans]

Awesome art Jordy!

[@solidworkstips]

That turned out really awesome! I’ll have to try something similar with gouges and knives 🔪 . I really like the effect of sanding after the stain!

[@CarvingFusion]

Tha k u

[@loriengray4802]

Another Awesome crave right there!!! Love watching your channel jordy you've really got me into craving and it's changed my life. Keep up the good work 😁👍😎.

[@hughtempleton8640]

Looking good Jordy 👍

[@rhettsaylors8810]

Totally rad.

[@paulpallister6623]

WOW Wicked as hell!!!

[@moonrabbitcraftworks4902]

Very cool!

[@ВладиславДудков-з9ч]

Здорово))) мне нравится Ваш стиль работы. Продолжайте в том же духе. Респект)))

[@stoverloren]

thats bad ass pardon the language but i love how it turned out. awesome awesome job buddy. i think ill try that

[@CarvingFusion]

U can do it

[@playmaxro]

Cool one, I was like: give him a beard from the beginning :)

[@frankbetz9202]

👍👍👍

[@CarvingFusion]

Thank u Frank

[@ktjwilliams]

Nice Save !!!!

[@chadbetten6711]

Good stuff manard 🤙✌

[@colinsmith8662]

Looks really cool 💀 💀👍👍👍👍

[@markduggan3451]

It looks cool to me.

[@markisom5971]

Jordy, you crack me up !!! I think you could find a turd and polish it to make it look like GOLD !!! I was carving a wood spirit yesterday and he has the loongest and skinniest nose I've ever seen !! His eyes are F#*ked up also, but hey, I had fun !!!

[@CarvingFusion]

Thats what its about, having fun

[@Straaker]

Impressive 👍👍👍

[@CarvingFusion]

Thank you

[@janiehall6095]

Hi Jordy what is the name of the kutzall burr u use for fine details

[@Krylon103112]

I think maybe skull eyes and nose and wood spirit beard. So no bottom jaw.

[@CarvingFusion]

Lol

[@kreardon16]

Love it I wanna buy one

[@CarvingFusion]

U can email.me.if u want, [e-mail]

[@paranormalmama7458]

Jordy I bought a couple of those beefs burs and now I need adapter to fit my Dremel what do you recommend? For a 1/4" shaft bur . Hope I said that right.

[@CarvingFusion]

A foredom.or a die grinder, the 1/4" burrs do mot fit the dremels

[@paranormalmama7458]

Thank so much Jordy. And I love the skeleton ghost spirits.

[@johnnybx3254]

Yours reminds me of skelator from he man 🤠☠️👻🎃

[@Rasordiver]

You shall carv chubaka 😁

[@CarvingFusion]

Lol

[@АлександрСпринж-ч8й]

А у нас таких фрез не достать Может подскажите чем заменить За ранее спасибо

[@CarvingFusion]

English?

[@АлександрСпринж-ч8й]

@@CarvingFusion Россия

[@ivanboutilier8105]

Looks awesome Jordy👍