+Ebay Honda I had to!! I grinded/hammered the $#!t out of the xmember!!
@trevinopadayachee85704 жыл бұрын
@@GarageBuiltHondas why a 421 header ?
@GarageBuiltHondas4 жыл бұрын
It's a stock b16. 4-2-1 can help with torque and this engine needs it.
@trevinopadayachee85704 жыл бұрын
@@GarageBuiltHondas what does a 4 - 1 header do
@GarageBuiltHondas4 жыл бұрын
More top end. Google the header differences. You can read some interesting info.
@AllMotorGang6 жыл бұрын
Man this car is stupid cleannn. Skunk2 needs to sponsor you
@nitrospark13746 жыл бұрын
One of the cleanest Hondas especially on KZbin man.
@GarageBuiltHondas6 жыл бұрын
+nitro spark much appreciated for that comment and thanks!!
@willlambert18096 жыл бұрын
As usual
@hewfil16 жыл бұрын
Now, I'm by no means a Honda guy, but I've been watching your videos with the Skunk2 parts. I like the sound, and it looks clean as hell.
@GarageBuiltHondas6 жыл бұрын
+hewfil1 really love to hear that, thanks so much for following along!!
@DashnCars6 жыл бұрын
That telescopic test pipe is pretty amazing. I don't think I'd seen one of those before, that'd work good on my wagon pipe I'm building. Great video as always Jon!
@GarageBuiltHondas6 жыл бұрын
Thanks homie!!
@DashnCars6 жыл бұрын
Garage Built Hondas no, thank you! I'm going to grab me one of the telescopic test pipes for sure.
@GarageBuiltHondas6 жыл бұрын
+Dash-n-Cars Super inexpensive too!
@ronniecason98076 жыл бұрын
i bought the innovative crossmember replacement for my b-swapped crx and i love it
@ruthlessillmatikz75536 жыл бұрын
Idk why you don’t have more subs you’re vids are very helpful
@GarageBuiltHondas6 жыл бұрын
+Ruthless illmatikz Thanks for that! It's growing, help spread the word! 😁
@greghughey97386 жыл бұрын
I love all the SK2 Alpha. It looks sooooooo much better now!!
@GarageBuiltHondas6 жыл бұрын
+Greg Hughey Thabks Greg, I love how the bay looks now with the S2!
@tommyandchill6 жыл бұрын
Exhaust placement looks a whole lot better now!
@GarageBuiltHondas6 жыл бұрын
+Tommy Kim finally!!!
@Mr.SparkleOG6 жыл бұрын
Extremely clean EF sir!! Everything looks mint!! Love it!! 👍
@GarageBuiltHondas6 жыл бұрын
+Mr Sparkle thanks Sparkles! 😁
@nowaydudehuh81456 жыл бұрын
Yo she looking SWEET!! Im surprised that skunk2 aint sponsored you yet bruh! She looking dope! Homie! Love how clean you keep them beauties!!..👍✌☝
@GarageBuiltHondas6 жыл бұрын
+Oldskool DA9 thanks!! I try to keep em looking good!
@rt4wd_wolff6 жыл бұрын
Nice work. Everything's coming together super clean 👌. I've seen some legit modifications of the OEM cross member to get the headers to fit, but I'm sure the traction bar will look cleaner
@GarageBuiltHondas6 жыл бұрын
+Josh Wolff Thabks Josh! I thought about that too, but always wanted the traction bar.
@williamfullman26396 жыл бұрын
LOL I ran into so weird problems on my Accord most of the headers I found didn't fit so I had to take one off a prelude it's sounds strange but it's the only one that has a o2 sensor port that fits your videos are very helpful thanks as always
@GarageBuiltHondas6 жыл бұрын
William Fullman Thanks Will! It fit at the flange but not at the cat/muffler area?
@williamfullman26396 жыл бұрын
No strange thing the ones made for accords you can't use you o2 sensor the prelude actually has one in the front the other one that's made for the Accord has the o2 sensor port on the side so I used the headers and o2 sensor it fit perfectly the cross member gave me issues to that why I love theses car
@GarageBuiltHondas6 жыл бұрын
+William Fullman got it, nice!
@IntegraDIY6 жыл бұрын
Very nice man! And yeah that front cross member gets in the way at times! Especially with DA’s and b swapped ED’s. 👍👍👍🔥🔥
@GarageBuiltHondas6 жыл бұрын
+Integra DIY thanks homie!
@bseriesonlyhondasintegras18836 жыл бұрын
U should do some pulls at the end of ur video's so we can hear & see the performance of the up graded parts
@GarageBuiltHondas6 жыл бұрын
Sounds good!
@xThe_Caveman6 жыл бұрын
Looking better every time Jon , Nice upgrade awesome work keep up the good work
@GarageBuiltHondas6 жыл бұрын
The_Caveman appreciate it brotha!
@xThe_Caveman6 жыл бұрын
Garage Built Hondas 😆🙏🙏🙏
@Smokeout896 жыл бұрын
Annual eibach Honda meet in may in cali hope u make it out here.....love the content 👍
@GarageBuiltHondas6 жыл бұрын
+SmOkEoUt_GsR I would love to check it out, always wanted to someday!!
@gmans78595 жыл бұрын
Nice... Keep up the good work! I like your thinking, craftsmanship and choice of nice parts. I might have tried to rework that Crossmember differently. Section, weld er' up, grind smooth, clean and a quick paint. Subbed.
@GarageBuiltHondas5 жыл бұрын
Thank you so much! I know, it's super ugly. I've since replaced it with the Innovative traction bar and it looks fantastic now! Hope you enjoy the future content!
@TwistedMetalsOfTexas6 жыл бұрын
Nice looks much better now nicely done!
@GarageBuiltHondas6 жыл бұрын
+TwistedMetals OfTexas 👍😀
@rauldelrio53246 жыл бұрын
Great video man and I'm gono put one b16A on my 91 Civic dx sedan and can't wait ✌
@zXTrEmenD0uS6 жыл бұрын
Came in a little late this time but I'm gonna be here for the next. Notif Squad!
@GarageBuiltHondas6 жыл бұрын
+Dani 👍😁
@FG2Zim6 жыл бұрын
I have an eg hatch in the same color with b16a2 and I just picked up a skunk2 v2 header!
@GarageBuiltHondas6 жыл бұрын
It's an amazing header. It's still a bronze color to this date!
@joshrenteria22166 жыл бұрын
Always on point!
@GarageBuiltHondas6 жыл бұрын
+Josh Renteria thanks Josh!!
@efjdmpagan51096 жыл бұрын
Hey man looking good the header and a subframe in your car would look sick keep it up!
@GarageBuiltHondas6 жыл бұрын
+EF JDM Pagan I've been thinking I should try the K tuned one on this car since I've already used the Innovative. We'll see what pops up!!
@efjdmpagan51096 жыл бұрын
All be sure to keep watching your videos for the subframe install thank you!
@johnda9keefer2046 жыл бұрын
Yet another awesome video bro!! Hopefully chris sadowski got to meet up with you lol
@GarageBuiltHondas6 жыл бұрын
618 DA9Keefer Wasn't able to go, the guy I was going to roll out there with didn't attend. I wanted to get some footage of his B18CRX, so we're shooting for the March event!
@markmeadows70934 жыл бұрын
I have a k20 and I still love those b16s. They can take hella boost.
@GarageBuiltHondas4 жыл бұрын
They are really fun for sure!
@markmeadows70934 жыл бұрын
Garage Built Hondas they appear to be easier to work on than the k20.
@GarageBuiltHondas4 жыл бұрын
I'm sure. I haven't worked on a K series but from what I've watched/seen I do have to agree with you.
@bogdan1356 жыл бұрын
I want to see b16a vs b20 hatch comparo! Lap times or roll/dig would be nice since they are similar HP#
@GarageBuiltHondas6 жыл бұрын
+bogdan135 that's a great idea! See if I can get a friend to drive(race) on of my cars with me. I'm sure they won't say no! Lol
@Torsion111 Жыл бұрын
Hello! I’ve encountered same fitment problem. Will this header fit Innovative traction bar perfectly? I just can’t find any header for b16 beside this Thank you
@GarageBuiltHondas Жыл бұрын
Yes it does.
@allana59306 жыл бұрын
Try to keep the weílding tip a little bit closer it should help my o.c.d. wouldn't let me do that to mine but I see why you did it I done the Integra GS hub's on it I'd like to do ABS and then the Integra motor swop after that.
@GarageBuiltHondas6 жыл бұрын
+Allan A I'm going to try that next time I weld something up, thanks for the tip!!
@athaothao28805 жыл бұрын
nice jasma header civic si garage
@keshavghunasham37836 жыл бұрын
Nice video N a really nice work
@jamesmcbride17126 жыл бұрын
Looks pretty
@GarageBuiltHondas6 жыл бұрын
+Backyard Garage very!!
@Sepulvedas7876 жыл бұрын
Good job brother
@GarageBuiltHondas6 жыл бұрын
+Jason Sepúlveda Thanks!
@YerVangster6 жыл бұрын
Great video. Any acceleration differences between the stock and skunk2 header?
@GarageBuiltHondas6 жыл бұрын
Yer Vang It feels better for sure, huge noticeable difference, not much that I can tell from the butt dyno.
@CJrekrap6 жыл бұрын
You have awesome videos! And nice car!
@GarageBuiltHondas6 жыл бұрын
+CJrekrap Thanks CJ, I try! Keep doing what you're doing man, I dig Honda content, and EF content especially!
@kracksmith4ejm16 жыл бұрын
with the stock cut temp cross member in place being 1mm away, when testing it hard, won't it flex a bit there to cause markings?
@GarageBuiltHondas6 жыл бұрын
kracksmith4ejm1 It might, but this car isn't and won't be driven that hard. I plan on the bar ASAI can afford! Lok
@MITONFILMS6 жыл бұрын
Skunk2 header= Tax😃😃 must be nice!👌🏾
@GarageBuiltHondas6 жыл бұрын
+Miton Films Finally able to drive this car again! That crossmember looks like piss though and now need to save up for the innovative or k tuned bar!
@COU51N.Kyle.6 жыл бұрын
Does it feel faster? I'm looking for a header for my b16 and I would be interested to know if you thought this header was worth it.
@GarageBuiltHondas6 жыл бұрын
Maybe it was just me, but my butt dyno said it felt faster! The stock manifold compared to this felt weak!
@SIRICKO6 жыл бұрын
Super fuck clean my man. One of the cleanest ef’s, on KZbin for damn sure and I have seen a shit load of clean cars in my day. Now that you have the header just go get the supercharger. 😁😁😁😁😁😁😁😁😁😁😁😁😁 Imma buy the innovated traction bar ass well cause the k-tuned one sucks sits to low.
@GarageBuiltHondas6 жыл бұрын
+SI RICKO dude thanks for that man!! I was considering the K Tuned just to try it out but Innovative I'm staying. It seems to be the best one out there! And I secretly want that supercharger for this car, I think it would be such a fun setup for some spirited runs!!
@SIRICKO6 жыл бұрын
Yeah the innovative traction bay by far is the best on the market. I may make A video talking about the two and my experience with the K-tuned one.
@GarageBuiltHondas6 жыл бұрын
+SI RICKO cool, let's check it out!
@TheMrFreebody6 жыл бұрын
Love the vids, just subed, but man you need a tig welder, hurt to watch that sexy pipe get murdered lol my skunk 2 parts are starting to arrive, cant wait until my girl starts looking like this, i think im going to go with a j32 with a turbo tho. Still up in the air, so atm im doing everything else that wont be effected by the swap. Im a welder so this will be a youtube car build lol Your vids really will help A LOT!
@GarageBuiltHondas6 жыл бұрын
I know man, I should really invest in one. This one is getting worn out too!
@GarageBuiltHondas6 жыл бұрын
What kind of TIG welder would you recommend?
@splcrm80076 жыл бұрын
Hey bro doesn’t it rub when the engine racks forward and backwards?
@GarageBuiltHondas6 жыл бұрын
+Anthony Singh it hasn't, and I have Hasport Mounts so there is very little movement to begin with. I only drive the car for fun so it won't be driven much until I can get the bar.
@cutecats57503 жыл бұрын
is b16a easy bolt on 1991 ef engine bay? or did modify some engine supports?
@GarageBuiltHondas3 жыл бұрын
You just need the swap mounts and related parts and it's pretty straightforward
@turbokefhatch91446 жыл бұрын
Hey John what happen if you don’t have the knock sensor on the b16a OBD0 It’s the knock sensor affect the motor in anywhere ?
@GarageBuiltHondas6 жыл бұрын
+Manuel Calderon yes, you'll get a CEL and Vtec won't engage.
@turbokefhatch91446 жыл бұрын
Garage Built Hondas thnk you for reply back John & I just broke mine coupe days ago but I can’t find one OBD0 b16a And my vtec still works I ask some many people and they said is okay if I don’t have the knock sensor in OBD0 they said you only need it OBD2
@GarageBuiltHondas6 жыл бұрын
+Manuel Calderon all knock sensors will work from any B series Vtec engine.
@turbokefhatch91446 жыл бұрын
Garage Built Hondas thnk you for the help brother!
@GarageBuiltHondas6 жыл бұрын
+Manuel Calderon you're welcome buddy!!!
@Goblinv36 жыл бұрын
what kind of exhaust are you running sound good
@GarageBuiltHondas6 жыл бұрын
+Gobiee Also Skunk2, take a look at it in depth here ----> kzbin.info/www/bejne/nmqVmqiqftp-fck
@davide04595 жыл бұрын
Hi, sorry for bothering you in this video, but I would like to ask you if you could tell me where you have the oxygen sensors in the heads, I have a 91 Civic with the same b16a obd0 engine. Thank you very much and I like your work with the Hondas.
@GarageBuiltHondas5 жыл бұрын
The o2 sensor is on the exhaust manifold. There is only 1 for this car.
@davide04595 жыл бұрын
@@GarageBuiltHondas OK, at the end of the exhaust manifold, right? I have the two o2 sensors connected to the first two pipes of the exhaust manifold.
@GarageBuiltHondas5 жыл бұрын
That works. Do you have a b16 also? Obd0?
@davide04595 жыл бұрын
@@GarageBuiltHondas Yes, I have the b16a but it is the European version called b16a1, and yes, obd0 too.
@anthonysempervive32616 жыл бұрын
Hey man I'm in the army just got stationed in el paso, I have a del sol. I have alot ot work I need to get done, are there any areas I can go to rent lifts and tools, etc.?
@GarageBuiltHondas6 жыл бұрын
I don't know of any spot that rents a garage that has a lift where you can do you own work. You can rent an assortment of tools from AutoZone or O'Reilly's.
@cjbailey79503 жыл бұрын
What should I do to make my 91 civic exhaust fit better on b18 headers? I'm not able to fit the exhaust in the rubber hangers they're way off. I had to hang the exhaust up with wire
@GarageBuiltHondas3 жыл бұрын
I'd have a muffler shop fix the piping.
@TheMandeep125Ай бұрын
Would this clear stock ac fan on a em1?
@nattsojaqs98225 жыл бұрын
Hey man, what size is the outlet and inlet on your test pipe and where'd you get yours ? Cant find one in the size I need
@GarageBuiltHondas5 жыл бұрын
amzn.to/2QLVk3d
@SS_Eli20146 жыл бұрын
By any chance did you have any clearance issues when you installed that radiator? I don’t know why my hood isn’t clearing it, and mine comes up above the support just as much as yours does
@GarageBuiltHondas6 жыл бұрын
Yes, I had to notch the webbing on the hood. I've seen others use them just fine, but the 2 that I've owned have never cleared the hood completely.
@SS_Eli20146 жыл бұрын
Ok cool thanks, I was gonna notch mine but wasn’t sure if maybe there was something I didn’t do right, I thought I was the only one having this problem, thanks for the info though!
@GarageBuiltHondas6 жыл бұрын
No prob
@hensperformance6 жыл бұрын
hey dude. your welds will look way better if you hold the torch closer.
@GarageBuiltHondas6 жыл бұрын
Ok, thanks for the tip! I'll give it a shot!
@caliborn863 жыл бұрын
Hey man quick question I was considering getting this Header, do u Kno what version works better for a 97 Integra Gsr with a Full size dual core radiator with A/C the V1 or V2 I want to get the right one that will hug the block a bit more??? Any info is appreciated.
@GarageBuiltHondas3 жыл бұрын
I'd email skunk2 and ask. I have no idea how v2 sits. It's designed for the charger so it may fit a little differently.
@caliborn863 жыл бұрын
@@GarageBuiltHondas thanks man I appreciate it! I dig all the videos bro keep them coming! 👍🏼👍🏼
@TheXXXskater16 жыл бұрын
Definitely need that traction bar
@GarageBuiltHondas6 жыл бұрын
+Sr.Sanhco BIG TIME!
@Tycrx896 жыл бұрын
Hey man, exhaust looks great, fits really well with the setup. Do you have a cel for o2 sensors? What did you do for the new setup? I have a check engine on currently for the o2 sensors, I know you have to run 1 to C8 in the ecu and the 2nd to C16 I believe, just curious to see what you did.
@GarageBuiltHondas6 жыл бұрын
No I don't. I only run 1 o2 sensor and never get a CEL for it either.
@Tycrx896 жыл бұрын
Garage Built Hondas really? That’s interesting I’ve read countless threads on having to run 2 o2 sensors if you’re running the stock obd0 computer. Is yours chipped to only look for one?
@GarageBuiltHondas6 жыл бұрын
Nope, completely stock. It'll sometimes slightly bog on the freeway after doing a steady speed for a long period of time. I had to look that one up a long time ago, other than that nothing. And this is on both b16's. The PR3 in my hatch and the PW0 in my sedan. No issues at all.
@Tycrx896 жыл бұрын
Garage Built Hondas ah I see that’s very interesting, maybe I have a bad o2 sensor or something. I believe the pw0 is the actually crx sir computer and the pr3 is from the Integra xsi. They have different intakes with different vacuum lines which I guess could cause an idle issue Depending on how it’s hooked up. My vtec cracks around 5200 while I’ve read on the pw0 it’s supposed to crack around 4900. Obd0 always amazes me haha
@GarageBuiltHondas6 жыл бұрын
Try swapping it out. I was going to add the 2nd o2 when I first did the swap but didn't give me problems so I left it alone.
@shawnfloyd57576 жыл бұрын
Will that header rainbow over time from heat? Or will it stay just as it is?
@GarageBuiltHondas6 жыл бұрын
Surprisingly I've had it on since this video and it's still a nice golden color! I couldn't believe it! My 1320 Toda style header on my b20 looks like poo compared to this.
@tonyzuniga76123 жыл бұрын
Do you have a video on that radiator install and where to get it 🤔
Any reason you went with the V2 instead of the V1? I'm wondering if the V1 would fit without having to modify.
@GarageBuiltHondas6 жыл бұрын
I thought this would have better clearance. The V1 looks wider, but you should definitely try it. If love to know and see.
@jasond47526 жыл бұрын
@@GarageBuiltHondas Not sure if I'll get one but I'll let you know if I do.
@GarageBuiltHondas6 жыл бұрын
Cool
@turbokefhatch91446 жыл бұрын
Hey John I have question my O2 sensor broke OBD0 b16A 1990 ef hatch Si do u know where I can find one ? I have a check engine light on and the car not running strong like before is running but I don’t feel the power I believe is bc I don’t have the 02 sensor help please.
@GarageBuiltHondas6 жыл бұрын
+Manuel Calderon an o2 sensor? You can buy them at any parts store for about $20
@turbokefhatch91446 жыл бұрын
Garage Built Hondas any 02 sensor OBD0 right
@GarageBuiltHondas6 жыл бұрын
+Manuel Calderon just mention you need it for a 90 Civic Si
@AgateJeweler5 жыл бұрын
Gotta get some scrap metal to practice that welding man
@AgateJeweler5 жыл бұрын
But its a sick build
@GarageBuiltHondas5 жыл бұрын
What I really need to do is get a much better welder. Lol
@AgateJeweler5 жыл бұрын
Garage Built Hondas yes amd try to keep the mig closer to you’re weld so the argon keeps it from sputtering as much
@GarageBuiltHondas5 жыл бұрын
Will do!
@raytech14795 жыл бұрын
What's better for you crx or hatchback
@GarageBuiltHondas5 жыл бұрын
Hatch
@pcostyle116 жыл бұрын
Do you check for leaks after welding ?!
@GarageBuiltHondas6 жыл бұрын
pcostyle09 I do, visually first then with some water.
@alfonsobarrera90775 жыл бұрын
I see you have Texas plate, what city you from?
@GarageBuiltHondas5 жыл бұрын
👍 El Paso
@centraltexascivic72993 жыл бұрын
I definitely want one of those mint looking stickers wink wink lol
@GarageBuiltHondas3 жыл бұрын
Nice!
@Tec-fv2xb6 жыл бұрын
Man i wanna run a flex pipe on my car too but don’t want any leak.
@GarageBuiltHondas6 жыл бұрын
+Wade 1 I figured I'd try it out. If any happen soon I'll let you know!
@gkanyong4457 Жыл бұрын
I don't think they make the telescopic test pipes anymore
@GarageBuiltHondas Жыл бұрын
Google Blox Test Pipe
@ivanbautista79824 жыл бұрын
what is the total length of your test pipe?
@GarageBuiltHondas4 жыл бұрын
I'm not sure. It's since been changed from this video.
@ianbrown5256 жыл бұрын
Would like that old pipe that u took off. Plz
@GarageBuiltHondas6 жыл бұрын
I sold it, sorry!
@austinparker99076 жыл бұрын
So my car doesn't got a cross member lol does that affect anything ?
@GarageBuiltHondas6 жыл бұрын
+Austin Parker lol, not at all!
@austinparker99076 жыл бұрын
Alright sweet and I got a question for headers I got a b18b1 and I saw u had the DC racing headers and then a 1320 and now these which one would u recommend ?
@GarageBuiltHondas6 жыл бұрын
+Austin Parker DC are kind of old school and a little smaller. The 1320 and Skunk2 seem similar in build and size so I bet the power they make should be similar. 1320 were the least expensive brand new. I'd get those, unless you're doing what I'm doing and going all Skunk2. That's why I choose these for this car.
@austinparker99076 жыл бұрын
Ok cool cus I'm just trying to build a fun little street car that goes when u want it too
@GarageBuiltHondas6 жыл бұрын
+Austin Parker Nice, what do you drive? I don't remember if you mentioned it to me before?
@jamesthebond00722 жыл бұрын
Anyone know if this will work on a Honda civic ek1 cxi hatchback 98
@GarageBuiltHondas2 жыл бұрын
As long as you get the correct header for the engine.
@JamesJonahJameson-MM3 жыл бұрын
What air box is that?
@GarageBuiltHondas3 жыл бұрын
JDM EF9
@jdmgarage21916 жыл бұрын
Nice bro 👍
@GarageBuiltHondas6 жыл бұрын
+Jdm Garage thanks Bern!
@emmanuelgoncalves34626 жыл бұрын
Do you know where I can buy a lip for my 88 wago?
@GarageBuiltHondas6 жыл бұрын
Ebay
@emmanuelgoncalves34626 жыл бұрын
Garage Built Hondas where or how can I send you pictures for questions and suggestions?:
@GarageBuiltHondas6 жыл бұрын
Do you have an Instagram?
@emmanuelgoncalves34626 жыл бұрын
Garage Built Hondas unfortunately I don't man
@xacoviex6 жыл бұрын
wow! nice video! :) I got PLM headers on my B18c. 4-1 I think they are. But mines hangs very low to the ground. so I am scraping a lot :s Jon, do you have a Facebook ? I can follow and could share my EF to you :) ? Cheers
@GarageBuiltHondas6 жыл бұрын
+xacoviex Usually all 4-1 hang low just because the way that they come together before the collector. EF's don't have a lot of ground clearance already so I usually stick to the 4-2-1 style. No Facebook, sorry! Got an Instagram?
@xacoviex6 жыл бұрын
Garage Built Hondas yes! I just created one. You can take a look and follow if you want @Xacovie Thanks :)
@GarageBuiltHondas6 жыл бұрын
+xacoviex followed!!
@sagiriizumi80796 жыл бұрын
That header is going to hit and get all scratched up. Is that an oil leak??? Something is drip drip drip.
@GarageBuiltHondas6 жыл бұрын
Lol, it's good to go so far.
@sagiriizumi80796 жыл бұрын
I just bought a 91 Accord Ex Sedan and put in new gaskets, both belts etc. Are Honda leaks serious? I notice experienced Honda guys don't seem to fret over them. Thanks. Great vids.
@GarageBuiltHondas6 жыл бұрын
I don't sweat them. As long as you know you're oil level is ok and keep adding as necessary. All are easy to fix except the rear main.
@sagiriizumi80796 жыл бұрын
Thank you! That's helpful to know. I hope to see a Kanjo racing build here. I'm not sure exactly their set up, but it must be good considering how they race in the loop.
@GarageBuiltHondas6 жыл бұрын
This car will be raced soon enough, hoping in the next 2 months it'll be ready!
@sevenstar47284 жыл бұрын
Can u tell me plz b16a new engine price
@GarageBuiltHondas4 жыл бұрын
No idea. Not sure you can find them "new". A JDM one might be $2500-3000 complete.
@realstreettuning53595 жыл бұрын
What wheels?
@GarageBuiltHondas5 жыл бұрын
These - kzbin.info/www/bejne/iZS6hohtfNdoeqs
@athaothao28805 жыл бұрын
nice skunk2 aipha header meg power civic si name skunk2
@theruthlessmerk37155 жыл бұрын
Get a skunk 2 pully and skunk2 oil pan
@GarageBuiltHondas5 жыл бұрын
They don't make a crank pulley or oil pan.
@theruthlessmerk37155 жыл бұрын
@@GarageBuiltHondas I guess the ones I've seen are fake and added stickers
@GarageBuiltHondas5 жыл бұрын
It's possible
@soccermaster76 жыл бұрын
is it me or do the welds and overall build quality of that header seem pretty mediocre? i know Skunk2 is classic and all but it just seemed like the quality wasn't all that great :\
@GarageBuiltHondas6 жыл бұрын
+E Honda The welds are great, but I agree with the cleanliness of the welds around the flange could be a tad cleaner, overall though I'm really happy with it. The car sounds excellent and it felt so good to drive. I hadn't driven it in forever but it felt really strong!
@soccermaster76 жыл бұрын
yeah i also have to take into account that this is a video and unless i see the headers in the flesh i shouldn't judge haha. but i'm glad you're happy with it and the car feels strong and good to drive! i just moved to the UK from the US so i'm carless currently but definitely on the lookout for an ef in the near future :) PS: i LOVE LOVE LOVE the way that 1320 header looks and sounds. it's basically sex >_
@GarageBuiltHondas6 жыл бұрын
+E Honda You know, it's not really the welds at all, it's just a little bit of grinding on the flange. Other than that I love it! I'll get some sound clips of it soon!
@soccermaster76 жыл бұрын
looking forward to it!
@rickyg48006 жыл бұрын
Have you been able to pay all this with youtube money
@GarageBuiltHondas6 жыл бұрын
No, my KZbin channel is small and it's for fun. My career isn't KZbin like some of the larger channels. I only make videos when I have the time/money and the content. I'm not in the garage everyday, maybe 4-7 days a month I'll be working on something car related.
@RobbyDee856 жыл бұрын
dyno time
@GarageBuiltHondas6 жыл бұрын
+Robby Delima I'd like to someday, just to see what this b16 makes.
@winm74796 жыл бұрын
Nice car but that exhaust is so ugly for the EF's
@GarageBuiltHondas6 жыл бұрын
Thanks, and ya, I think most don't care for the style of it.