SkutrNet Exhaust Servo Buddy Install on the Honda CBR1000RR from Sportbiketrackgear.com

[@TrackSol]

I noticed the Honda "wing" logos on the tank cover are backwards. Might want to swap them left to right.

[@jonah_d786]

Do you need to disconnect the cables to the butterfly valve as well?

[@sportbiketrackgear]

Yes you remove the cables, the servo and the OEM exhaust which contains the valve. No need to install this if you are not changing the exhaust on the bike. - Van

[@MCLIFE786]

U got any video for GSXR 1000 2017 and up servo buddy installed???

[@sportbiketrackgear]

Sorry I do not. We flashed the ECU on this bike to disable the PAIR system rather than adding a servo eliminator. - Van

[@grantelliott1521]

How do you unplug that electrical connecter so easy, it's a pain in the ass on my 07 600rr

[@sportbiketrackgear]

35 years of practice. - Van

[@robertgoodman5276]

i have a servobuddy on my honda 2002 cbr954rr. it only works some of the time how do i find out the problem?

[@sportbiketrackgear]

Man that is a 22 year old bike. You may need to take the bike in to a tech to have this diagnosed. - Van

[@johnmccabejr3152]

I had to unplug my other 02 sensor which plugs in on left side of bike is there a plug for that also to bypass 02 please and thank you

[@sportbiketrackgear]

It has been a while but I only remember there being one O2 sensor on the 14 CBR1000RR. - Van

[@ESPPsycho]

Is this run by Jeff and Jeremy?

[@LibertyDIY]

Good info thank you

[@jimmyk5331]

I have a 2008 cbr1000 and I put a slip on exhaust and the servo buddy and it was starting to run lean and burn oil why do you think this was happening??

[@sportbiketrackgear]

The 2008 CBR1000 had an oil burning problem that is common for that year, make and model. 1 QT per 1,000 miles is not uncommon. A slip on will not make your bike burn oil. - Van

[@jimmyk5331]

Sportbike Track Gear Thanks BRYAN for the Reply I also wanted to ask why my 08 cbr1000 runs rich when I have a slip on exhaust on, for most bikes a slip on doesn’t require much but for these bikes it makes the bike run a lot leaner and I thought it was burning oil because the exhaust and cause a rider behind me smelled burnt oil when he rode behind me what could I do to fix this without getting a flash or power commander?

[@johnmccabejr3152]

My light still came on I still have that original part plugged in waiting for servo but I had another 02 closer towards header part of oem exhaust that I had to unplug on left side of bike how do I bypass that, that's why my light is on 2015 CBR 1000rr thank you in advance

[@sportbiketrackgear]

If you have the servo plugged in and not hooked to the valve it will still turn on the light when the servo moves and finds itself out of the expected range. - Van

[@johnmccabejr3152]

@@sportbiketrackgear ok thank you I just got ecu back and flashed

[@MonsterDHFOX]

@@sportbiketrackgearwill this decrease power on the top end if the servo is still in the bike and with aftermarket exhaust? My bike isn’t pulling hard on the high end rpm’s.

[@Nemesistyx]

Nice, to see this project. Even right now it would be great to win this bike! The exhaust was so bulky.

[@Paul-vh4xj]

Why do we need that connection when we disconnect the cable?

[@rafaelcaroquintero7224]

This servo emulator used for Honda CBR 954 RR 2002 or not ..

[@danijelduh4603]

This servo buddy is totally unnecessary. I made huge mistake and bought this before I tried aftermarket exhaust without this "buddy" I have cbr 1000 rr repsol edition 2015,with Leo Vince evolution exhaust. No servo buddy,also no error.Only thing is when you turn servo to take out stock exhaust cable must turn servo back. Dont need any of this shit.Sorry for expression,but it is true! Also on ABS version it is not saving any space!

[@wilsonsimoes819]

E onde encontro isso no Brasil.

[@SmokinZen]

Good product but my 2013 ABS was located in a very hard to reach area not fun

[@Guilhermemrpalmieri]

Can you translated to portuguese? This pruduct have for CBR 929RR 2000? I have a problem with a servo in my bike and red light stay on and indicated code 35 and F1 mark in painel.

[@nofears831b9]

Camera Guy needs Better angles and Focus on the main things the guys talking bout not just panning around

[@toftlol]

you really need a mic on your shirt... really bad audio quality :S