Skydroid FPV Receiver for Android

[@ulliu.3200]

Do you think I can start flying a quadcopter with a device like that? I can't yet afford proper fpv Google's but I want to start some slow flights :)

[@LYSStuff]

Hi, yes, you can use this Skydroid as your FPV receiver display in your android device. This Skydroid version support only 5.8GHz band. Remember to check your quadcopter FPV camera support Frequency, some is 2.4 GHz or 5.8 GHz channel. There also have other FPV receiver like FPV monitor with 4.3 inch or 7 inch. Here is the link: kzbin.info/www/bejne/jKu1mX-ih9aUatk Hope it helps. :)

[@ulliu.3200]

@@LYSStuff thank you!

[@bluedragonbikerskin855]

Hi thanks for making the video do you know if the receiver picks up audio and outputs it through the phone audio?

[@LYSStuff]

@@bluedragonbikerskin855 welcome, the receiver only pick up video. No Audio for this receiver.

[@wiggylab1957]

Hello , and thank you for your time and effort in these productions, I am just starting in FPV , I have a VTX and now am looking for the receiver. What type of heat sink or fan would recommend for the vtx weight and power is no issue, it is mounted on a 4x4 off road RC. I understand that propagation will depend on the environment, but do you have an estimation of reception distance ? Thank you again.

[@LYSStuff]

The transmitter EWRF TS5823 Transmitter For 200mW: 100 meter to 200 meter For 600mW: 400 meter to 600 meter My experience maximum is around 150 meter for 200mW. I just use the normal heat sink come together with the transmitter. For Power, depend the transmitter power, the higher power the longer distance able to support. Also depend the antenna gain (able to boost up the receiver/transmitter detection distance).

[@wiggylab1957]

@@LYSStuff thank you so much for your prompt reply this information will be very helpful thank you again

[@Rocketman0407]

Does the skydroid app have a setting for rotating the video feed in the app? I would like to install a camera upside down on my rc plane since I have found a very good plage to install.

[@LYSStuff]

Hi, for skydroid app does not had function of rotate the video feed in the skydroid app. but you can use other app to flip/rotate your video. you may refer to this video kzbin.info/www/bejne/m6XIlZeXrM2qetE

[@Rocketman0407]

@@LYSStuff thanks a lot. I will install the camera combo in my little 3 channel reaper rc plane. Do you know any good mounts that can be used to hold my phone while using the controller?

[@mickeyg.c.1654]

App does'nt work on any of my samsung devices

[@LYSStuff]

Hi, yes, If download skydroid app from google playstore, the app crashed every time when open it. I download it from Skydroid website, I think different version For Android smartphone: support OTG cable connection for Android smartphone or tablet (no for ios) 1. Install the App: www.skydroid.xin/?type=newsinf... for skydroidfpv.apk Or search for "FUAV" in the store to download. 2. Connect the receiver with an OTG cable 3. After booting up, press the menu button for 3 seconds, it will automatically search for the frequency and automatically lock the strongest signal. 4. Video Link: Check if your smartphone supports USV: v.youku.com/v_show/id_XMTc1MDE... How to Use v.qq.com/x/page/u0528zyzpyj.html Hope it helps.

[@atvsteam]

@@LYSStuff download page does not exists!

[@LYSStuff]

@@atvsteam under No. 1. Install app link still working.

[@IslandCreek]

I couldn't get it to load either..

[@Pollero20]

Thank you for the video. I have the same transmitter, it is necessary to remove the plastuc cover? Am using mine with the plastic cover and no heatsink and this thing gets very hot 😂

[@LYSStuff]

U mean yours come with extra plastic cover? It advice to put heat sink. But if you it in cold environment, then heat sink is not necessary needed.

[@SushiHigh83]

Hi, do you have a link for the batterie to make it work ?

[@LYSStuff]

Hi, using the 2s cell Lipo battery. You may refer to this link. kzbin.info/www/bejne/iJWQhpmjopqLiqssi=JXRVbqQaHYmMc4hh Link to purchase (but is the not same brand as mine) www.ebay.com.my/itm/255461012633

[@JCSITAKA]

Colleague for my use in a drone, is it really necessary a heat exchanger for cooling the transmitter?

[@LYSStuff]

Hi, it depend on how well the transmitter we use and also the environment temperature. For the transmitter mode that I use, it recommended to put heat sink on it for better performance. Hope it helps. :)

[@JCSITAKA]

@@LYSStuff Thank you very much for the information, you helped me a lot :3

[@LYSStuff]

@@JCSITAKA welcome 🥂

[@lespaul3717]

Hi, this is ridiculously hard to connect. I dont know how you make it look easy. I tried installing skydroid FPV, I think thats what you said??? The logo looked the same, it says" it was made for an older version of Android". Do you know of another app this will work with, I am pulling my hair out... Im new to this stuff and thought it would be easy???

[@LYSStuff]

Hi, yes, If download skydroid app from google playstore, the app crashed every time when open it. I download it from Skydroid website, I think different version For Android smartphone: support OTG cable connection for Android smartphone or tablet (no for ios) 1. Install the App: www.skydroid.xin/?type=newsinf... for skydroidfpv.apk Or search for "FUAV" in the store to download. 2. Connect the receiver with an OTG cable 3. After booting up, press the menu button for 3 seconds, it will automatically search for the frequency and automatically lock the strongest signal. 4. Video Link: Check if your smartphone supports USV: v.youku.com/v_show/id_XMTc1MDE... How to Use v.qq.com/x/page/u0528zyzpyj.html Hope it helps.

[@lespaul3717]

@@LYSStuff Aaaaargh, really??? I was that frustrated I returned it first thing this morning... Maybe I should order another Thanks for the advise.

[@atvsteam]

@@LYSStuff dowload page not found, Error 404 Feel sorry! This website may be inaccessible due to the following reasons!

[@hendrawewe9526]

it uses 1 receiver with dual antennas or 2 receivers which can combine omni and directional antennas? thank you

[@LYSStuff]

Hi, it used 1 skydroid FPV as receiver which support to use 2 antennas to improve the received signal. You can combine with 1 omni and 1 directional antennas. Then your receiver can support 360 degree at short distance (omni directional antenna) and far distance using the directional antenna (but the directional antenna need to point to the transmitter).

[@hendrawewe9526]

@@LYSStuff oh, so that means this is diversity right?

[@LYSStuff]

Yea, this type of FYP receiver with diversity function, able to switch to choose which antenna have received better signal.

[@alexherrera3918]

Reports are that the skydroid app crashes every time making the receiver useless. Can it use a different APP?

[@LYSStuff]

Hi, yes, If download skydroid app from google playstore, the app crashed every time when open it. I download it from Skydroid website, I think different version For Android smartphone: support OTG cable connection for Android smartphone or tablet (no for ios) 1. Install the App: www.skydroid.xin/?type=newsinf... for skydroidfpv.apk Or search for "FUAV" in the store to download. 2. Connect the receiver with an OTG cable 3. After booting up, press the menu button for 3 seconds, it will automatically search for the frequency and automatically lock the strongest signal. 4. Video Link: Check if your smartphone supports USV: v.youku.com/v_show/id_XMTc1MDE... How to Use v.qq.com/x/page/u0528zyzpyj.html Hope it helps.

[@dan_crim]

so you can monitor the camera over how many kilometers ?

[@LYSStuff]

Hi, I only try before around 500 meter, it also depend on your FPV transmitter signal strength or antenna too

[@ichini3793]

Hello, i have a drone but the video is only 250meters, if i use this can it extend the video live feed?

[@LYSStuff]

@@ichini3793 Hi, if you mean using the Skydroid receiver. Yes, it will extend, because the skydroid had the extended antenna. Can also change the antenna to support longer range.

[@debsarkar4893]

Can I use in my own app made with Android Studio or simply in PC using something like OpenCV

[@LYSStuff]

As long your designed apps able to communicate with the skydroid FPV, then it will be fine. FYI, the skydroid have their own apps too.

[@debsarkar4893]

@@LYSStuff Thanks for the quick response ☺️ bro and also for helping 🙂

[@LYSStuff]

@@debsarkar4893 welcome, and thanks for your support.😄

[@PerchEagle]

What are other models other than skydroid ? What is the difference between this and the ROTG02 ?

[@LYSStuff]

In general, If you want a simple way to view FPV video on a mobile device for close-range flying or testing, the ROTG02 could be suitable. If you're looking for a dedicated FPV system with potentially better range, more features, and a more immersive experience, the Skydroid T12 might be a better choice. But better check the specification details.

[@aimless3827]

Same shit different name on it.

[@LYSStuff]

@@aimless3827 lol

[@012wtfez8]

Thx for vid, will this work with the S24U?

[@LYSStuff]

Welcome, I think as long is Android app. You may check the download app link in the video description, it should be have stated support up to which andoird version.

[@marcgutierrez6600]

Can you have your goggles and recover at the same time or just one ?

[@LYSStuff]

Hi, we can have multiple receiver with 1 transmitter. You may refer to this video. 1 transmitter with 2 FPV receiver. kzbin.info/www/bejne/mXLKhnVvgNaHf5Isi=eZAIQOhdHLIZ_qOv

[@Sasha_Svarovski]

как его к вин7 подключить?

[@LYSStuff]

Hi, Для компьютера: 1. Подключите его к компьютеру с помощью USB-кабеля. 2. Для XP: Включите камеру; для WIN7: установите программное обеспечение камеры AMCP; для WIN10: Включите камеру. Или для наземной станции MP 3. После загрузки нажмите кнопку меню и удерживайте ее в течение 3 секунд, произойдет поиск частоты и зафиксируется самый сильный сигнал. СРЕДНИЙ: 1. Используйте кабель 4P (плеер должен воспроизводиться), вход питания 5 В. 2. После загрузки нажмите кнопку меню и удерживайте ее в течение 3 секунд, произойдет поиск частоты и зафиксируется самый сильный сигнал.

[@Sasha_Svarovski]

@@LYSStuff получилось к ХР подключить. И то только благодаря случайности. Работает - да. НО! Какое ужасное качество картинки! КАК оно тормозит! Бог с ним, тормозит... КАРТИНКА - МУСОР! Даже не мусор... а китайский плевок в лицо! 320х240 - НЕ БОЛЕЕ! Всем пострадавшим от этого гаджета - но пасаран! гиб-гиб ура! рот фронт!

[@ВладимирХлыстов-я1э]

Hi, the link to the Skydroid app doesn't seem to be working. Could you please provide a new link?

[@LYSStuff]

Hi, thanks for letting me know. I just update the link, please check in the description again

[@gringocatracho]

Is there an fpv receive that works with iPhone? I keep seeing that this only works with android. And the R051 is non existent now.

[@LYSStuff]

Hi, u may check this model: Happymodel VMR48 48CH 5.8G AV FPV Receiver For iPhone shopee.com.my/Happymodel-VMR48-48CH-5.8G-AV-FPV-Receiver-For-iPhone-Android-IOS-Smartphone-Mobile-Tablet-i.211429278.4134465343 Hope it helps. :)

[@nilsrichart9074]

Is it possible to connect the setup to a other camera?

[@LYSStuff]

Hi, yes, can use other type of camera that can transmit video. FYI, the FPV Receiver is 5.8GHz range. Hope it helps :)

[@Mark-ci3kt]

hi what is the difference between the black case skydroid and the white case skydroid ?

[@LYSStuff]

Is the same, Only the casing color. If the model is the same. Then only the casing is different.

[@AloneBoy-wh4qd]

How about range... Plz say me.

[@LYSStuff]

This Skydroid version support only 5.8GHz band. for EWRF TS5823 transmitter support 100 m up to 300 m range. You could find the specification for the Skydroid at the link below: shopee.com.my/product/284703302/5766704265

[@SAIPHMAYA1]

i can use for ir night vision?

[@LYSStuff]

Hi, as long your transmitter channels is in the range 5.8GHz that compatible with thr skydroid. Then the skydroid receiver able to detect it. Play safe, ask the IR night vision for the compatibility with which type of FPV receiver

[@dungtrananh1522]

What vtx did you use?

[@LYSStuff]

Hi, I'm using EWRF TS5823 Transmitter, you may refer to this link. kzbin.info/www/bejne/e3PUp6ywn9qsr6c

[@anasmabdi7995]

What is the range of this fpv and skydroid thnks

[@LYSStuff]

Hi, it depend on the EWRF TS5823 Transmitter For 200mW: 100 meter to 200 meter For 600mW: 400 meter to 600 meter You may refer to kzbin.info/www/bejne/e3PUp6ywn9qsr6c EWRF TS5823 Data Sheet link: www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwj1lbWonrHvAhWyILcAHQZkBiwQFjABegQIARAF&url=http%3A%2F%2Fmyosuploads3.banggood.com%2Fproducts%2F20181129%2F20181129021942EWRFTS5823manual.pdf&usg=AOvVaw0Y4NdxQKSLi_hv_9kjbDy-

[@georgeaura]

Does it work with raceband?

[@LYSStuff]

Yes. The FPV Receiver cover Frequency: 5645MHz~5945MHz.

[@robdiangelo1081]

Can you share a link to the app please ?

[@LYSStuff]

Hi, the app link at the video description. 😀

[@igedeartanayasa5316]

Do you have to activate OTG in the Android smartphone settings, so it can connect to the Skydroid receiver or do you connect directly to the receiver without activating OTG brother's?

[@LYSStuff]

Hi, Yes, we need to enable the OTG in the android to enable skydroid to communicate.

[@igedeartanayasa5316]

ok, thanks brother, what is the name of the Skydroid application brother?

[@igedeartanayasa5316]

Can the sound be recorded directly when the video recorder is on your FPV camera, brother🙏?

[@LYSStuff]

@@igedeartanayasa5316 Hi, the FPV video is live. And no record function in the app. But we can use our phone screen recorder to record together with our sound. 😆

[@igedeartanayasa5316]

ohhh😯,,, so that's it brother, that means the audio can't be recorded while the video is being recorded at the same time. OK, sorry I'm still a beginner, thank you, I hope you're always healthy, brother🙏.

[@felipee4319]

Hi, Thanks by this video , in you opinion this should work with RUSHFPV RUSH Solo Tanque 5.8GHZ 48CH 1.6W VTX Transmissor? (I want use with speedybee f450 v3 FC), thanks again!!!

[@LYSStuff]

Hi, it should be able to works for all 5.8Ghz FPV transmitter. Because the skydroid cover 150CH of 5.8GHz Feature: 1. For 150CH 5.8Ghz analog signal, it can covers all frequency bands via 150CH scanning May refer to the video description for more details info of the skydroid specification. Hope it helps.

[@felipee4319]

@@LYSStuff got it!! Thanks in advance :)

[@LYSStuff]

Welcome and thanks for your support 😄

[@scottreilly8160]

How far does this reach on ground

[@LYSStuff]

Hi, it depend on the transmitter EWRF TS5823 Transmitter For 200mW: 100 meter to 200 meter For 600mW: 400 meter to 600 meter You may refer to kzbin.info/www/bejne/e3PUp6ywn9qsr6c EWRF TS5823 Data Sheet link: www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwj1lbWonrHvAhWyILcAHQZkBiwQFjABegQIARAF&url=http%3A%2F%2Fmyosuploads3.banggood.com%2Fproducts%2F20181129%2F20181129021942EWRFTS5823manual.pdf&usg=AOvVaw0Y4NdxQKSLi_hv_9kjbDy-

[@collegeboy2733]

It will work in mobile signal jammer.

[@tesfaysimon2727]

How many meters can it transimt the range?

[@LYSStuff]

Hi, it depend on the transmitter EWRF TS5823 Transmitter For 200mW: 100 meter to 200 meter For 600mW: 400 meter to 600 meter You may refer to kzbin.info/www/bejne/e3PUp6ywn9qsr6c EWRF TS5823 Data Sheet link: www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwj1lbWonrHvAhWyILcAHQZkBiwQFjABegQIARAF&url=http%3A%2F%2Fmyosuploads3.banggood.com%2Fproducts%2F20181129%2F20181129021942EWRFTS5823manual.pdf&usg=AOvVaw0Y4NdxQKSLi_hv_9kjbDy-

[@tesfaysimon2727]

@@LYSStuff thank you very much

[@jorgeluismunozcolatzin3954]

Me puedes mandar este mismo video en español mx. Porfabor para entenderte.

[@LYSStuff]

Hi, the best I can do is add in English subtitle, now you can view the video with cc "subtitle". Go to bottom tight of the video, click Setting > Subtitle > Auto translate> English to Spanish. Hope it helps.

[@filipkorecko4457]

Why it isn't working 😢?

[@LYSStuff]

Remember to turn on andoird app debugging.

[@LYSStuff]

Else, refer to the video description to download the app from the skydroid website. Hope it helps.

[@filipkorecko4457]

@@LYSStuff i have this app yet, but when i will connect reciever, app will open, and then nothing, only black screen. I don't know what to do.

[@LYSStuff]

@@filipkorecko4457black screen? or the buzzle screen? If black screen there is 2 possibility: 1. your phone app+ skydroid detected your camera, but your camera lens cover didn't removed. 2. Skydroid app version not compatible (suggest download from website instead from google playstore) Troubleshooting 1. Change any better USB cable (make sure it able to read and write data, not only for charging) 2. Try another phone, maybe is phone version not compatible 3. worst case, your skydroid device problem

[@filipkorecko4457]

@@LYSStuff i think this app is not compatible with my mobile, but GO FPV too. So what app can i download? I can't find some.

[@Elias-w2b5z]

Thank u so much

[@LYSStuff]

Welcome and thanks for your support

[@prashanthRCdrone7984]

Hello sir this is a apps using

[@LYSStuff]

Hi, please find it in video description. There has a link to download the app. Enjoy

[@rckavi7398]

Hei bro,i have one problem camera max voltage 5V in specs,but every one connect 7.2v,is it problem ?

[@LYSStuff]

Hi, It better to use the recommended voltage Input. 7.2v voltage supply can turn on your camera.. But it might burn your camera too if over power drain.

[@MrSiciro]

That latency is not bad

[@LYSStuff]

Yea, quite stable.

[@datumotion1448]

What is the apps name

[@LYSStuff]

Hi, the app name "Skydroidfpv. Apk. For Android smartphone: support OTG cable connection for Android smartphone or tablet (no for ios) 1. Install the App: www.skydroid.xin/?type=newsinfo&S_id=36 skydroidfpv.apk Or search for "FUAV" in the store to download. More information in the description. Hope it helps. :)

[@BrianAnderson1095]

Picked up Cameras with this lol

[@LYSStuff]

Welcome to the family... 😆

[@nguyenvanhai7728]

Bay xa được bao km bạn ơi

[@LYSStuff]

Xin chào, nó phụ thuộc vào bộ phát Bộ phát EWRF TS5823 Đối với 200mW: 100 mét đến 200 mét Đối với 600mW: 400 mét đến 600 mét Bạn có thể tham khảo kzbin.info/www/bejne/e3PUp6ywn9qsr6c

[@awesomusmaximus3766]

It can only do 640 by 480 it's junk

[@LYSStuff]

Yea, that's the limit. Could you share higher resolution FPV receiver with cheaper or similar price?

[@awesomusmaximus3766]

@@LYSStuffIt doesn't work all i get is distorted audio there's no app either

[@awesomusmaximus3766]

Android won't allow the app because it is not an authorised app

[@LYSStuff]

The video shown working fine and my phone is android phone.

[@awesomusmaximus3766]

@@LYSStuff actualy all i get is audio on windows

[@abzaman77]

Whats the maximum renge for streaming?

[@LYSStuff]

Hi, there is no streaming range info for this model. It also depend transmitter signal strength and antenna gain. But I tried before 200 meter only, still working fine