Skywalker 12 Foot Trampoline Assembly + Pro Tips To Preserve Your Trampoline | Assembly Hour #8

[@scott_t_woodsman]

Great video... stop by and give me a hand if you happen to be driving through Oregon. If not, I’ll have to assemble this thing myself.

[@Prime_Spaces]

I may take you up on that! 😄 The Pacific NW has some of the most beautiful scenery the US has to offer. It’s trampoline season here so I know I’ll be assembling this trampoline again many times over the next couple of months. I’ll create a close-up, step-by-step video hopefully in time for your build.

[@Hustler-EJ]

Very informative video. You have cool mood! Keep it up man. 👍👍👍

[@Wanderer515]

We looked at the weight limit of 200 pound limit and kind of rethought of getting it. Is it worth it if we are teens?

[@Prime_Spaces]

No, I don’t think it’s worth it. It wouldn’t last long before someone puts a hole in the jumping mat, or you guys will be replacing parts left and right. Look for a model or a different brand with a larger weight limit.

[@Wanderer515]

@@Prime_Spaces My dad thought it would be good enough and now have it fully set up so I guess it is what it is. We have a store right over the mountain so it should be good

[@RIVERCITYHAPKIDO]

How long does it take you to put it up and what do you charge?

[@creekwalker62]

It still looks new! 🏆

[@Prime_Spaces]

Brand spanking new! I’m impressed each year I assemble and disassemble.

[@medabee1322]

I wish u could have gave a closer look on how to connect the blue caps to pole

[@chaasayadsawapah]

Yup I messed up the spring assembly pare. I was so stubborn. I did not want to take it back down so I used some tie-down straps. That was very dangerous. Got it done. Next time I will know to take my time

[@Prime_Spaces]

No no on the tie down straps my man! It’s just not with it. Safety first!

[@chaasayadsawapah]

@@Prime_Spaceslol. I only used them to pull the prints so I could hook them. I absolutely was not going to take all the others off on the other side. Also I did not see the spring tool until I had gotten through with the assembly. They put it at the bottom of the box.

[@Prime_Spaces]

😳 oh mann, I hope you had gloves...

[@mrmontgomery707]

Great video! Just purchased one my kids. Have you ever gone over the suggested weight limit of 200 lbs?

[@Prime_Spaces]

I don’t actually own this trampoline but I do assemble them for our customers. The jumping mat is more likely to break over time if you exceed the 200 lb. The mat will start to tear and create small holes in the mat which will get bigger and bigger over time as the kids jump on it - especially big kids.

[@rodschmidt8952]

@@Prime_Spaces Use two mats?

[@mackharris6536]

Dang she been really taken really good care on that trampoline

[@EhCanadian316]

Good video. One should never let one stand up all winter! At the very least store the fabrics and springs in tool shed :)

[@Prime_Spaces]

Exactly! The metal frame can handle it but all else will certainly perish sooner rather than later.

[@cabbas100]

How to buy the replacement pieces

[@Prime_Spaces]

Hi there! You can buy replacement parts either on Amazon or directly on the Skywalker Trampoline website.

[@danfriel9608]

It’s not impossible to do one after another with the springs, I use it as a workout intentionally

[@Cartooncatali2015]

My brand new big ass expensive trampoline took a flight during a extreme wind storm into a tree 12 feet in the air and I couldn’t get it out 😂. First it hit the fence, the fence didn’t even get a dent in it but two poles were bent in half (those are solid metal too) and a giant hole in the bouncy part. Fml 🤦‍♀️

[@Prime_Spaces]

😳 wait whaaaa?!?! Let me guess… you didn’t install to mount it or the ground?

[@Cartooncatali2015]

@@Prime_Spaces it didn’t come with one lol 😂 it never moved unless I had help pulling it over so I could cut the grass under it until the wind storm

[@lkeller3643]

Just put my kids trampoline up today and still don't know how to tie down the net. I guess I should have waited til my Husband got of work to help me 😩 so far we (the kids) help because they I wouldn't hear the last of it lol

[@Prime_Spaces]

Ahh! You may have made the mistake of attaching the jumping mat to the springs too early. The net that you are talking about should be connected/looped to the jumping mat FIRST, then you attach the mat and net combination to the springs. If you did this then you have to detach the springs, follow the steps I just mentioned, then reattach the springs. Make sense?