This is just the video I was hoping to find, after looking everyone on KZbin. I just picked up my first ever RC car, a Slash 4x4 VXL, I love it, and want to take good care of it from the beginning.
@billchristo78943 жыл бұрын
A few times i used the shower sprayer on my hose when my slash was used on a damp grassy field. Rinsed off but didnt flood the electronics area or center diffs. Then used my shop air compressor till truck was dry. Then used some lube in key areas. No rust no fuss. Clean as can be! However I do like the silicone spray. May give parts of my truck a light spray.
@miketheprotato45113 жыл бұрын
Good vid, just FYI, WD40 is non conductive so it wont harm electrical components. Even so, I 100% agree that it makes a good surface for debris to stick to.
@zates22723 жыл бұрын
Great training aid video thank you! (Me and my son are newbies and slash owners.) THANKS!
@sirscrepter50523 жыл бұрын
Same
@hunterharris63482 жыл бұрын
I hope you didn’t do any of this you do not put your wheels in soap and water it will ruin them this guy is crazy I have had rc cars for 6 years. What are what is this guy doing
@shlomogoldstein33732 жыл бұрын
@@hunterharris6348 I've cleaned my tires with soap and water for the past 25 years. Not sure what you're talking about dude
@DSQUARED55 Жыл бұрын
Purchased a case of product based on seeing the success you had. Great Video. However after using it on my ARRMA 6s KRATON I noticed a milky white substance especially where parts are joined. On the bottom of chassis, paint is actually softened and scrapes off with a finger nail ???? I am sure that I dried and wiped the surfaces, but this side effect won't work for me.
@WreckinStreetsDaily3 жыл бұрын
My friend got his washed up ashore at the beach lol i have been tasked with getting it back up in good shape lol
@tkgbucs2 жыл бұрын
Traxxas recommends using a all purpose cleaner and rinse with water then take your blower and blow water off then do what I do run a blow dryer over car dries everything 10 minutes done
@wolfboy20 Жыл бұрын
What kind of all purpose cleaner??
@4WheelRC Жыл бұрын
@@wolfboy20 Disassemble, wash all plastics in dish soap and water. Hinge pins, bearings can be dunked in break cleaner for thorough cleaning but, be sure to lube the bearings afterwards. Using any of these auto products on these plastics likely is not a good or the best idea (especially things like wd-40) because many of these contain solvents which in the end makes plastic brittle. Hair dryer is a good idea after a quick cleaning and for making old plastic look new because most plastics are petroleum based and the heat pulls the oils back to the surface and rejuvenates the plastics but, keep water away from your bearings,....sealed or not... Really though and if you want to do things right. Tear your cars down and clean them properly after every 10 or so packs. This also lets you check for damages or issues that in the future cause bigger problems if not taken care of. Just my thoughts and thank you for the video, I do believe the product you have chosen is probably one of the safer products. Dry lube in the spray cans for bike chains is something else I think might be a fairly safe lubricant that repels dust and debris..
@ak42069 Жыл бұрын
@@4WheelRCRyan Harris uses silicone spray and if he says it then I’ll take the suggestion for what it’s worth. Everything else you said pretty much makes 100% although I would be careful with heating plastics though since it’s a very temporary effect and you don’t want to melt anything
@rainypath9614 күн бұрын
once you spray your car with that silicone spray, the smell will never go away and it'll permeate wherever you keep your rc car. not to mention how greasy your hands will get every time you handle your rc. but it does work really well
@t3floz4 ай бұрын
Great video! Does silicone also remove water from metal etc? And does any silicone spray work?
@s1lentcalib3r2 жыл бұрын
Simple green water and an air compressor works just fine as long as it's dried it will not harm anything. I've literally taken a water hose sprayed it completely down then dried it completely and not 1 issue using water.
@alexo8963 жыл бұрын
Does the Silicone spray damage the bearings or make it rough?
@krunchkid41263 жыл бұрын
No it actually improves the bearings.
@LehmanRacingTeam3 жыл бұрын
Hey buddy. Do you have a part number for the bash guards on the arms that cover bottom of the shocks? Need those Are those just Traxxas hd arms?
@novaxrc75132 жыл бұрын
RPM shock guards
@GoonRides4 жыл бұрын
Addicted to the vid
@bobazarre2 жыл бұрын
Great video, thank you for the tips - I'm going to do the same to my Rustler
@Thevariablegamer3 жыл бұрын
So when you spray the silicone spray on does it leave a oily residue?
@beckmorman46693 жыл бұрын
Nope
@tojo35072 жыл бұрын
No….it leaves a silicone residue
@4WheelRC Жыл бұрын
@@tojo3507 Brilliant!
@traxxasfans3 жыл бұрын
I love your video I have just subscribed to your channel
@erikm20032 жыл бұрын
What kv motor are you running? And what gearing? Thanks
@cartermiller80503 жыл бұрын
Great vid made me learn a lot
@marksmola72994 жыл бұрын
Good idea, thanks
@aidendavis3086 Жыл бұрын
My spray can says lubricant with teflon. Is that no good?
@evanrose30703 жыл бұрын
2:57 you can see a wild cat in its natural habitat 🐱 🐈 🦊
@Trek500003 жыл бұрын
Thanks for the detailed video!
@t3floz3 ай бұрын
I tried this but the silicone created a sticky layer and made the dirt harder to get off
@kaaskonijn29734 жыл бұрын
Nice video
@Saio893 жыл бұрын
So I just bought a Traxxas Slash and I was thinking of doing the Silicon processes before driving it for the first time. Would it help to keep apply it first so that it is easier to clean and reapply in subsequent cleanings?
@brayden_mx12043 жыл бұрын
Idk
@Dark-Stryder2 жыл бұрын
Where’d you get those wheels?
@synchronicity99662 жыл бұрын
Thumbs up to you good sir. 👍 Thank you.
@cG-es8mb3 жыл бұрын
Can I use the liquid wrench to oil wheel bearings and other bearings on truck?
@SlashNBash3 жыл бұрын
Yup! Works great for cleaning and lubricating bearings
@cG-es8mb3 жыл бұрын
@@SlashNBash thank ya. I was wondering.
@cG-es8mb3 жыл бұрын
@@SlashNBash will blaster silicone lubricant work? Found it at Lowe’s.
@SlashNBash3 жыл бұрын
Yeah looks like it's a pure silicone lubricant spray. From their website they claim it will leave a tack free film which doesnt accumulate dirt, so it would be worth trying.
@timmanis20008 ай бұрын
@@cG-es8mbhow did it work out for you?
@RandomHeroTx3 жыл бұрын
What wheels and tires are those
@phuphan3553 жыл бұрын
Does it damage the electrical?
@alvarsten87193 жыл бұрын
No it dosent
@Tuidkskiwjdhdbd3 жыл бұрын
I just watched a video a dude saying spray pb blaster on basically all bearings even motor lol I couldn't believe it I used wd 40 on my links on my crawler one time and I was pissed worried I was going to make it wear quicker.
@tojo35072 жыл бұрын
PB Blaster is NOT a good option. It breaks down oils and lubricants and can damage plastic components. Silicone spray is the best option.
@alexskinner41962 жыл бұрын
Does it leave a residue
@christianascencio3362 жыл бұрын
No
@TriedWhistle3 жыл бұрын
Imagine being the one person that disliked the video
@AtvAtv-ld8jr3 жыл бұрын
what shocks are those
@danielwelton88063 жыл бұрын
They look like traxxas gtr shocks.
@Wisecobraa3 жыл бұрын
My tires won’t come off the hex is to tight I guess
@joe_hutch08343 жыл бұрын
Does it have to be that silicone spray or any?
@danielwelton88063 жыл бұрын
Any silicone spray works just make sure its not penetrating spray
@clayd94773 жыл бұрын
Sub number 666 glad to be here
@diegoreyes94863 жыл бұрын
Can anyone tell me what he has on his a arms that are protecting his shocks?
@novaxrc75132 жыл бұрын
RPM shock shafts
@eddy_lympian3 жыл бұрын
Can I use a air compressor to blow off the dust
@SlashNBash3 жыл бұрын
You can, just be careful not to force dirt into bearings & diffs
@eddy_lympian3 жыл бұрын
@@SlashNBash i Ok thanks
@TheJordanJ3 жыл бұрын
Cant use silicon spray
@tojo35072 жыл бұрын
Why??….Best lubricant for RC. Even shocks use silicone fluid.